• Energy Research
• 12. Responsible consumption close
• 6. Clean water close
• 2. Zero hunger close
• US close

Energy is consumed at every stage of the cycle of water production, distribution, end use, and recycled water treatment. Understanding the nexus of energy and water may help to minimize energy and water consumption and reduce environmental emissions. However, the interlinkages between water and energy have not received adequate attention. To address this gap, this paper disaggregates and quantifies the energy consumption of the entire water cycle process in Beijing. The results of this study show that total energy consumption by water production, treatment and distribution, end use, and recycled water reuse amounts to 55.6 billion kWh of electricity in 2015, or about 33% of the total urban energy usage. While water supply amount increased by only 10% from 2005 to 2015, the related energy consumption increased by 215% due to water supply structural change. The Beijing municipal government plans to implement many water saving measures in the area from 2016 to 2020, however, these policies will increase energy consumption by 74 million kWh in Beijing. This study responds to the urgent need for research on the synergies between energy and water. In order to achieve the goal of low-energy water utilization in the future, water and energy should be integrated in planning and management.

Forest soil acidification caused by acid deposition is a serious threat to the forest ecosystem. To investigate the liming effects of biomass ash (BA) and alkaline slag (AS) on the acidic topsoil and subsoil, a three-year field experiment under artificial Masson pine was conducted at Langxi, Anhui province in Southern China. The surface application of BA and AS significantly increased the soil pH, and thus decreased exchangeable acidity and active Al in the topsoil. Soil exchangeable Ca2+ and Mg2+ in topsoil were significantly increased by the surface application of BA and AS, while an increase in soil exchangeable K+ was only observed in BA treatments. The soil acidity and active Al in subsoil were decreased by the surface application of AS. Compared with the control, soluble monomeric and exchangeable Al in the subsoil was decreased by 38.0% and 29.4% after 3 years of AS surface application. There was a minimal effect on soluble monomeric and exchangeable Al after the application of BA. The soil exchangeable Ca2+ and Mg2+ in the subsoil increased respectively by 54% and 141% after surface application of 10 t ha-1 AS. The decrease of soil active Al and increase of base cations in subsoil were mainly attributed to the high migration capacity of base cations in AS. In conclusion, the effect of surface application of AS was superior to BA in ameliorating soil acidity and alleviating soil Al toxicity in the subsoil of this Ultisol.

AbstractObjective: The marked increase in the prevalence of obesity in the United States has recently been attributed to the increased fructose consumption. To determine if and how fructose might promote obesity in an animal model, we measured body composition, energy intake, energy expenditure, substrate oxidation, and several endocrine parameters related to energy homeostasis in mice consuming fructose.Research Methods and Procedures: We compared the effects of ad libitum access to fructose (15% solution in water), sucrose (10%, popular soft drink), and artificial sweetener (0% calories, popular diet soft drink) on adipogenesis and energy metabolism in mice.Results: Exposure to fructose water increased adiposity, whereas increased fat mass after consumption of soft drinks or diet soft drinks did not reach statistical significance (n = 9 each group). Total intake of energy was unaltered, because mice proportionally reduced their caloric intake from chow. There was a trend toward reduced energy expenditure and increased respiratory quotient, albeit not significant, in the fructose group. Furthermore, fructose produced a hepatic lipid accumulation with a characteristic pericentral pattern.Discussion: These data are compatible with the conclusion that a high intake of fructose selectively enhances adipogenesis, possibly through a shift of substrate use to lipogenesis.

Paper mill sludge (PMS) is a residual biomass that is generated at paper mills in large quantities. Currently, PMS is commonly disposed in landfills, which causes environmental issues through chemical leaching and greenhouse gas production. In this research, we are exploring the potential of fast pyrolysis process for converting PMS into useful bio-oil and biochar products. We demonstrate that by subjecting PMS to a combination of acid hydrolysis and torrefaction pre-treatment processes it is possible to alter the physicochemical properties and composition of the feedstock material. Fast pyrolysis of pretreated PMS produced bio-oil with significantly higher selectivity to levoglucosenone and significantly reduced the amount of ketone, aldehyde, and organic acid components. Pretreatment of PMS with combined 4% mass fraction phosphoric acid hydrolysis and 220 °C torrefaction processed prior to fast pyrolysis resulted in a 17 times increase of relative selectivity towards levoglucosenone in bio-oil product along with a reduction of acids, ketones, and aldehydes combined from 21 % to 11 %. Biochar, produced in higher yield, has characteristics that potentially make the solid byproduct ideal for soil amendment agent or sorbent material. This work reveals a promising process system to convert PMS waste into useful bio-based products. More in-depth research is required to gather more data information for assessing the economic and sustainability aspects of the process.

To effectively address the sustainability crises our planet faces, decision-makers at different levels of government worldwide will have to get a handle on three key challenges: learning from Global North and South initiatives in tandem, taking stock of social innovations alongside technological fixes, and nurturing grassroots sustainable development initiatives next to, or in place of, top-down corporate and government interventions. Current scientific literature and grant-making institutions have often reinforced the compartmentalized fashion in which we learn and draw policy lessons from North/South, social/technical, and bottom-up/top-down sustainability initiatives, including local food system innovations. The strategic levers for global sustainable development lying in-between are thus left out. This paper uses exploratory, multiple case study analysis to address this omission. By concurrently drawing lessons from grassroots innovations in Brazil, New York, and Senegal—three profoundly different socioeconomic and geographic contexts—we identify common pressure points that have enabled local communities to drive system-wide transformations toward climate adaptation, resilience, and sustainability in the agri-food system. The findings of this paper would be of value to scholars, government officials, and community groups engaged in agri-food systems sustainability and interested in the processes of change that have allowed budding innovations to stabilize and scale up.

Electrical submersible pumps (ESPs) are widely used in upstream oil production. The presence of a low concentration solid phase, particle-laden flow, in the production fluid may cause severe damage in the internal sections of the pump which reduces its operating lifetime. To better understand the ESP pump's endurance, two different designs of commonly used mixed flow ESPs were studied numerically to determine the pump's flow behavior at its best efficiency point. Computational fluid dynamics (CFD) analysis was conducted on two stages of one design type of pump's primary flow path employing Eulerian–Granular scheme in ANSYS FLUENT. The key parameters affecting the erosion phenomena within the pump such as turbulence kinetic energy, local sand concentration, and near wall relative sand velocity were identified. The predictive erosion model applicable to pumps was developed by correlating the erosion key parameters with available experimental results. It is concluded that the use of an erosion model on the second design of ESP proves the model's versatility to predict the erosion on different designs of ESPs.

AbstractPrincipal Component Analysis (PCA) was used to evaluate groundwater quality data acquired in the pre-injection and injection periods for the Illinois Basin – Decatur Project (IBDP), a large-scale carbon capture and storage (CCS) project located in Decatur, Illinois, USA. For the pre-injection and injection periods three principal components explained 76.6% and 80.0% of the total data variance, respectively. Analysis of the pre-injection data set determined that highly positive loadings for total dissolved solids, chloride, bromide, sodium, magnesium, potassium, and electrical conductance designated the first component (PC1) as the salinity factor. High loadings for calcium, iron, and sulfate in component two (PC2) represents an oxidation-reduction component. The third component (PC3) represents groundwater acidity because of highly positive loading of pH. For the injection data set the variables contributed to the first component are bromide, sodium, total dissolved solids, chloride, electrical conductance, potassium, sulfate, iron, and calcium. Sulfate, magnesium, and calcium contribute to the second component and pH to the third component and represent salinity, dissolution, and acidity of groundwater. The results of the PC analysis indicate that water-rock interactions are the primary mechanism governing groundwater quality during both periods. The results of this analysis indicate that CO2 injection activities have not impacted the quality of the shallow groundwater in the project area.

Comparison of the water budget for the typical cropland and pear orchard ecosystems in the North China Plain Comparison of the water budget for the typical cropland and pear orchard ecosystems in the North China Plain