• Energy Research
• natural sciences close

The conversion of chemical energy contained in organic matter into electricity has become an object of interest for many scientists worldwide. This technology is used in microbial fuel cells (MFC). Apart from generating electrical energy, these cells can be used simultaneously for wastewater treatment. Although the technology is constantly being improved, currently functioning microbial fuel cells cannot provide appropriate output parameters to use on an industrial scale. One of the barriers is so-called extracellular electron transfer, which in turn depends on the electrode type used, its material, shape, and size. According to current literature, carbon, graphite, stainless steel, and ceramics are the most frequently used electrode materials. However, more and more often, scientists are turning to other, unusual materials, the production of which uses the newest technologies, and one of them is graphene. This material is modified in different ways and connected with other materials, and the results of this seem to be very promising. Scientists manage to get a higher level of extracellular electron transfer and, hence, higher output parameters of the whole system. This article describes chosen technologies and attempts made by scientists worldwide to use graphene in MFC and their results.

The aim of this study was to optimize biomass and docosahexaenoic acid (DHA) production by Schizochytrium sp. grown on waste glycerol as an organic carbon source. Parameters having a significant effect on biomass and DHA yields were screened using the fractional Plackett–Burman design and the response surface methodology (RSM). Schizochytrium sp. growth was most significantly influenced by crude glycerin concentration in the growth medium (150 g/dm3), process temperature (27 °C), oxygen in the bioreactor (49.99% v/v), and the concentration of peptone as a source of nitrogen (9.99 g/dm3). The process parameter values identified as optimal for producing high DHA concentrations in the biomass were as follows: glycerin concentration 149.99 g/dm3, temperature 26 °C, oxygen concentration 30% (v/v), and peptone concentration 2.21 g/dm3. The dry cell weight (DCW) obtained under actual laboratory conditions was 66.69 ± 0.66 g/dm3, i.e., 1.27% lower than the predicted value. The DHA concentration obtained in the actual culture was at 17.25 ± 0.33 g/dm3, which was 3.03% lower than the predicted value. The results obtained suggest that a two-step culture system should be employed, with the first phase focused on high production of Schizochytrium sp. biomass, and the second focused on increasing DHA concentration in the cells.

The aim of this study was the performance evaluation of anaerobic digestion of dairy wastewater in a multi-section horizontal flow reactor (HFAR) equipped with microwave and ultrasonic generators to stimulate biochemical processes. The effects of increasing organic loading rate (OLR) ranging from 1.0 g chemical oxygen demand (COD)/L·d to 4.0 g COD/L·d on treatment performance, biogas production, and percentage of methane yield were determined. The highest organic compounds removals (about 85% as COD and total organic carbon—TOC) were obtained at OLR of 1.0–2.0 g COD/L·d. The highest biogas yield of 0.33 ± 0.03 L/g COD removed and methane content in biogas of 68.1 ± 5.8% were recorded at OLR of 1.0 g COD/L·d, while at OLR of 2.0 g COD/L·d it was 0.31 ± 0.02 L/COD removed and 66.3 ± 5.7%, respectively. Increasing of the OLR led to a reduction in biogas productivity as well as a decrease in methane content in biogas. The best technological effects were recorded in series with an operating mode of ultrasonic generators of 2 min work/28 min break. More intensive sonication reduced the efficiency of anaerobic digestion of dairy wastewater as well as biogas production. A low nutrient removal efficiency was observed in all tested series of the experiment, which ranged from 2.04 ± 0.38 to 4.59 ± 0.68% for phosphorus and from 9.67 ± 3.36 to 20.36 ± 0.32% for nitrogen. The effects obtained in the study (referring to the efficiency of wastewater treatment, biogas production, as well as to the results of economic analysis) proved that the HFAR can be competitive to existing industrial technologies for food wastewater treatment.

Hydrogen is an environmentally friendly biofuel which, if widely used, could reduce atmospheric carbon dioxide emissions. The main barrier to the widespread use of hydrogen for power generation is the lack of technologically feasible and—more importantly—cost-effective methods of production and storage. So far, hydrogen has been produced using thermochemical methods (such as gasification, pyrolysis or water electrolysis) and biological methods (most of which involve anaerobic digestion and photofermentation), with conventional fuels, waste or dedicated crop biomass used as a feedstock. Microalgae possess very high photosynthetic efficiency, can rapidly build biomass, and possess other beneficial properties, which is why they are considered to be one of the strongest contenders among biohydrogen production technologies. This review gives an account of present knowledge on microalgal hydrogen production and compares it with the other available biofuel production technologies.

Studies on harnessing solidified carbon dioxide (SCO2) for municipal sewage sludge (MSS) pre-treatment have been conducted exclusively in batch reactors. This makes it difficult to accurately assess how long-term SCO2 treatment affects anaerobic digestion (AD) conditions and performance. The aim of our study was to evaluate the effect of long-term MSS pre-treatment with SCO2 on AD conditions, anaerobic bacterial community, and biogas composition and yields. The presented experiments are the first studies on the effect of pre-treatment with SCO2 on the efficiency of AD of MSS in continuous reactors. So far, the impact of the organic load rate (OLR) on the efficiency of MSS methane fermentation has not been assessed, which is also a novelty of the conducted research. The AD process was conducted in continuous-stirred, continuous-flow anaerobic with an active volume of 20 dm3. The digestion process was run at 38 ± 1 °C. The experiment was divided into two stages. Raw (non-pretreated) MSS was used in stage 1, whereas the MSS used in stage 2 was pre-treated with SCO2. The SCO2/MSS ratio was 1:3. Each stage was sub-divided into four variants, with different levels of the OLR ranging from 2.0 to 5.0 gCOD/dm3·day. Pre-treatment with SCO2 was found to improve AD performance at an OLR of 3.0–4.0 gVS/dm3·day. The 3.0 gVS/dm3·day variant offered the best biogas production performance—both daily (29 ± 1.3 dm3/day) and per VS added (0.49 ± 0.02 dm3/gVS)—as well as the highest CH4 content in the biogas (70.1 ± 1.0%). In this variant, the highest energy output effect of 187.07 ± 1.5 Wh/day was obtained. The SCO2 pre-treatment was not found to change the pH, FOS/TAC, or the anaerobic bacterial community composition. Instead, these variables were mainly affected by the OLR. Our study shows that MSS pre-treatment with SCO2 at a SCO2/MSS ratio of 0.3 (by volume) significantly improves AD performance in terms of methane production and feedstock mineralization. The pre-treatment was found to have no negative effect on the long-term continuous operation of the reactor.

The present study aimed to determine the effect of a 17.6 mT static magnetic field (SMF) on the efficiency of anaerobic digestion (AD) of municipal sewage sludge (MSS). The SMF had a significant impact on methane (CH4) production efficiency, the levels of fermentation rate (ηFMSS) vs. removal rate (ηVS), and the structure of the anaerobic bacteria consortium, but it did not affect cumulative biogas production. The highest CH4 yield (431 ± 22 dm3CH4/kgVS) and the highest methane content in the biogas (66.1% ± 1.9%) were found in the variant in which the SMF exposure time was 144 min/day. This variant also produced the highest ηFMSS and ηVS values, reaching 73.8% ± 2.3% and ηVS 36.9% ± 1.6%, respectively. Longer anaerobic sludge retention time in the SMF area significantly decreased AD efficiency and caused a significant reduction in the number of methanogens in the anaerobic bacteria community. The lowest values were observed for SMF exposure time of 432 min/day, which produced only 54.8 ± 1.9% CH4 in the biogas. A pronounced reduction was recorded in the Archaea (ARC915) and Methanosaeta (MX825) populations in the anaerobic sludge, i.e., to 20% ± 11% and 6% ± 2%, respectively.

Technological solutions allowing the increase of the technological efficiency of anaerobic methods of wastewater treatment are still under investigation. The weaknesses of these solutions can be limited by the use of active fillings. The aim of the present study was to determine the impact of fluidized active filling on the effectiveness of anaerobic treatment of sugar-industry effluent, the production efficiency and the qualitative composition of the biogas produced. High, comparable (p = 0.05) effluent treatment results were observed at tested organic load rates between 4.0 and 6.0 kg COD (Chemical Oxygen Demand)/m3·d. The COD removal rate reached over 74%, biogas yields ranged from 356 ± 25 to 427 ± 14 dm3/kg CODremoved and the average methane contents were approximately 70%. A significant decrease in effluent treatment efficiency and methane fermentation was observed after increasing the organic load rate to 8.0 kg COD/m3·d, which correlated with decreased pH and FOS/TAC (volatile organic acid and buffer capacity ratio) increased to 0.44 ± 0.2. The use of fluidized active filling led to phosphorus removal with an efficiency ranged from 64.4 ± 2.4 to 81.2 ± 8.2% depending on the stage. Low concentration of total suspended solids in the treated effluent was also observed.

Inexpensive carbon sources offering an alternative to glucose are searched for to reduce costs of docosahexaenoic acid production by microalgae. The use of waste glycerol seems substantiated and prospective in this case. The objective of this study was to determine the production yield of heterotrophic microalgae Schizochytrium sp. biomass and the efficiency of docosahexaenoic acid production in various types of cultures with waste glycerol. Cultivation conditions were optimized using the Plackett–Burman method and Response Surface Methodology. The highest technological performance was obtained in the fed-batch culture, where the concentration of Schizochytrium sp. biomass reached 103.44 ± 1.50 g/dm3, the lipid concentration in Schizochytrium sp. biomass was at 48.85 ± 0.81 g/dm3, and the docosahexaenoic acid concentration at 21.98 ± 0.36 g/dm3. The highest docosahexaenoic acid content, accounting for 61.76 ± 3.77% of total fatty acids, was determined in lipid bodies of the Schizochytrium sp. biomass produced in the batch culture, whereas the lowest one, accounting for 44.99 ± 2.12% of total fatty acids, in those of the biomass grown in the fed-batch culture.