• Energy Research
• Closed Access close
• Embargo close
• natural sciences close
• 6. Clean water close
• 15. Life on land close
• 9. Industry and infrastructure close

Dried, milled perennial ryegrass samples were processed using chemical and physical treatments and the extracted cellulose products were analysed for yield, crystallinity by X-ray Diffraction (XRD) and for purity using Thermogravimetric Analysis (TGA), Pyrolysis-Gas Chromatography/Mass Spectrometry (Py-GC/MS) and Fourier Transform Infrared (FTIR) spectroscopy. Extraction protocols examined the use of chemical chelation, acid and alkaline hydrolysis, along with physical degradation methods. Highest product yields were obtained using single step chemical protocols followed by physical processing, however, these products had low crystallinity and higher amorphous fraction content. Multistep chemical processing to completely remove hemicellulose and lignin with an alkali refluxing step, delivered lower yielding cellulose products of greater crystallinity and purity. In combination, the four instrumental techniques highlighted removal of amorphous fractions, providing rapid, accurate compositional data on the extracted cellulose products.

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

The influence of ethanol on the degradation kinetics of linear alkyl benzene sulfonate (LAS) and organic matter was investigated using batch experiments with different initial LAS concentrations (8.3 mg L-1 to 66.9 mg L-1) and biomass immobilized on sand. Data were fitted with a substrate inhibition model. Concentrations of 2.4 mg LAS L-1 and 18.9 mg LAS L-1 (without and with ethanol) provided the maximum LAS utilization rate by the biomass (Sbm). For LAS degradation, ethanol addition favored a lower decrease in the specific substrate utilization rate (robs), even at the LAS concentration usually reported as inhibitory (> 14.4 mg L-1). For organic matter degradation, robs was higher with ethanol. Higher biomass differentiation was observed at higher LAS concentrations. With ethanol, microbial selection occurred at LAS concentrations near Sbm. At higher LAS concentrations, the dominance and diversity values did not change significantly with ethanol, whereas without ethanol, their behaviors were irregular.

Plants exhibit plasticity in response to their current environment and, in some cases, to that of the previous generation (i.e. maternal effects). However, few studies have evaluated both within- and between-generation plasticities and the extent to which they interact to influence fitness, especially in natural environments. The plasticity of adult traits to two generations of natural differences in light was determined for Campanulastrum americanum, a forest-edge herb that expresses annual and biennial life histories. Plasticity was found to an individual's light environment (within generation) and the maternal light environment (between generations). Responses to ambient light for size traits and timing of flowering were probably passive, whereas apparently adaptive responses were found for light acquisition traits. Maternal light influenced the expression of most adult traits but had the strongest effect when plants were germinated in natural environments. The transgenerational effects of light were consistent with adaptive plasticity for several traits. Plastic within-generation changes in flowering time may also result in adaptive between-generation effects by altering the offspring life history schedule. Finally, the results underscore the importance of conducting studies of within- and between-generation plasticity in natural populations, where the environmental context is relevant to that in which the traits evolved.

The possibility of using anaerobic digestate effluent (ADE) to replace freshwater and nutrients for bioethanol production was explored. The ethanol concentration yielded from ADE and post-centrifuged ADE supernatant was 79.60±1.75 g/L and 78.33±1.66 g/L, respectively, with a 24% dry mass (DM) of soft wheat. Ethanol production was enhanced in ADE by as much as 18% in comparison to the production in freshwater (66.61±0.28 g/L, p<0.01). Without yeast nutrients, ADE fermentation yielded an ethanol concentration of 81.10±2.87 g/L, which was significantly higher than that in freshwater fermentation (59.67±1.79 g/L). Analysis showed that ADE contained rich nitrogen, proteins and minerals. After one-step distillation, the ethanol concentration attained was 700.05±46.20 g/L in ADE as compared to 622.79±32.22 g/L in freshwater (p<0.05).

• Premise of the study: Climate change is associated with phenological shifts in an increasing number of organisms worldwide. However, accurate estimates of these shifts are dependent on long‐term data sets that include phenological observations from before annual average temperatures began to rise.• Methods: We compared the first flowering times of native prairie plants between 2007 and 2010 with historical data recorded by O. A. Stevens from 1910 to 1961. By merging climate variable data from the same time period, it also was possible to correlate first flowering dates with associated climate variables.• Key results: Over the past 100 years, spring temperatures in the Red River Valley near Fargo, North Dakota, USA, have increased, and growing seasons have lengthened significantly. Seventy‐five percent of the 178 species observed by Stevens had flowering times that were sensitive to at least one variable related to temperature or precipitation. Over the past 4 yr, 5% to 17% of the species observed have significantly shifted their first flowering time either earlier or later relative to the previous century.• Conclusions: The results of this study indicate that as spring temperatures in the northern Great Plains have increased and the growing season has lengthened, some spring flowering species have advanced their first flowering time, some fall species have delayed their first flowering, and some species have not changed. Given the importance of flowering timing for reproductive success, the changing climate in the Great Plains is expected to have long‐term ecological and evolutionary consequences for native plant species.

AbstractA bioreactor system composed of a stirred tank and three tubular bioreactors in series was established, and continuous ethanol fermentation was carried out using a general Saccharomyces cerevisiae strain and a very high gravity medium containing 280 g L−1 glucose, supplemented with 5 g L−1 yeast extract and 3 g L−1 peptone. Sustainable oscillations of glucose, ethanol, and biomass were observed when the tank was operated at the dilution rate of 0.027 h−1, which significantly affected ethanol fermentation performance of the system. After the tubular bioreactors were packed with 1/2″ Intalox ceramic saddles, the oscillations were attenuated and quasi‐steady states were achieved. Residence time distributions were studied for the packed bioreactors by the step input response technique using xylose as a tracer, which was added into the medium at a concentration of 20 g L−1, indicating that the backmixing alleviation assumed for the packed tubular bioreactors could not be established, and its contribution to the oscillation attenuation could not be verified. Furthermore, the role of the packing's yeast cell immobilization in the oscillation attenuation was investigated by packing the tubular bioreactors with packings with significant difference in yeast cell immobilization effects, and the experimental results revealed that only the Intalox ceramic saddles and wood chips with moderate yeast cell immobilization effects could attenuate the oscillations, and correspondingly, improved the ethanol fermentation performance of the system, while the porous polyurethane particles with good yeast cell immobilization effect could not. And the viability analysis for the immobilized yeast cells illustrated that the extremely lower yeast cell viability within the tubular bioreactors packed with the porous polyurethane particles could be the reason for their inefficiency, while the yeast cells loosely immobilized onto the surfaces of the Intalox ceramic saddles and wood chips could be renewed during the fermentation, guaranteeing their viability and making them more efficient in attenuating the oscillations. The packing Raschig rings without yeast cell immobilization effect did not affect the oscillatory behavior of the tubular bioreactors, further supporting the role of the yeast cell immobilization in the oscillation attenuation. Biotechnol. Bioeng. 2009;102: 113–121. © 2008 Wiley Periodicals, Inc.

In order to enhance the efficiency and benefits of the sludge anaerobic digestion process, K2FeO4 was added to a sludge anaerobic digestion system, and its effects on the system were comprehensively investigated. Results showed that sludge anaerobic digestion was greatly improved by adding 500 mg/L K2FeO4. Biogas and methane productions were increased by 26.6 and 28.4%, respectively. Sludge reduction, protein removal, and the conversion efficiency of dissolved organics were all improved. The mechanism revealed that the disintegration of sludge flocs, enhancement of protease activity, and decrease of soluble sulfide toxicity on microorganisms contributed to biogas production and sludge reduction. Biogas quality was improved, benefitting from the decreasing H2S content in biogas; as additionally, the cost of biogas desulfuration was reduced. In the biogas slurry treatment, the PO43--P concentrations were decreased by 39%, which also reduced the cost of the dephosphorization processes at certain extent.

Abstract Industrial hemp, (Cannabis sativa L.), one of the earliest crops spun for fiber, is now used for a variety of commercial products including paper, textiles, clothing, biodegradable plastics, biofuel, food, animal feed etc., all of which are derived from hemp fiber or seeds. Being wind pollinated, dioecious and staminate hemp plants produce large amounts of pollen that are attractive to bees. Hemp flowering in northern Colorado, where this study was conducted, occurs between the end of July and the end of September. This time period coincides with a dearth of pollinator-friendly crop plants in the region, making hemp flowers a potentially valuable source of pollen for foraging bees. Here we present the diversity and abundance of bees collected in the fields of flowering hemp. A total of 23 different genera of bees were collected of which the European honeybee, Apis mellifera at 38% of the total abundance was the most dominant followed by Melissodes bimaculata at 25% and Peponapis pruinosa at 16%. These three genera made up nearly 80% of the total abundance. While hemp does not produce any nectar, the pollen rich nature of the flowers can make hemp an ecologically valuable crop. As cultivation of hemp continues to expand, we expect insect pests on hemp to also become prevalent. Our results documenting bee diversity in flowering hemp provides the impetus for the development of integrated pest management plans that protect pollinators while controlling pests.