• Energy Research
• Closed Access close
• natural sciences close
• Applied Energy close

Abstract Energy harvesting in natural environment has attracted a great deal of attention to generate stable and continuous electrical energy. In this work, we proposed an advanced pyroelectric energy harvesting system by using form-stable phase change material (PCM) composites. The PCM composite connected pyro-electrode generated electrical polarization due to the change of external environment. Polyethylene glycol (PEG) and 1-tetradecanol (1-TD) composites with different phase transition field induced the temperature difference during light-on/-off process. Poly(vinylidene difluoride) (PVDF) was utilized for pyroelectric energy harvesting. The PVDF based pyro-electrode was applied changing the conditions of solar light irradiation and heat air flow. The PCM composites controlled the temperature fluctuation effectively and generated stable output electrical voltage and current. Numerical simulation was carried out to provided in-depth insight into the underlying physics of the system. We envisage that the developed thermal energy harvesting system can pave a way towards high-throughput and sustainable energy harvesting.

Abstract Energy harvesting in natural environment has attracted a great deal of attention to generate stable and continuous electrical energy. In this work, we proposed an advanced pyroelectric energy harvesting system by using form-stable phase change material (PCM) composites. The PCM composite connected pyro-electrode generated electrical polarization due to the change of external environment. Polyethylene glycol (PEG) and 1-tetradecanol (1-TD) composites with different phase transition field induced the temperature difference during light-on/-off process. Poly(vinylidene difluoride) (PVDF) was utilized for pyroelectric energy harvesting. The PVDF based pyro-electrode was applied changing the conditions of solar light irradiation and heat air flow. The PCM composites controlled the temperature fluctuation effectively and generated stable output electrical voltage and current. Numerical simulation was carried out to provided in-depth insight into the underlying physics of the system. We envisage that the developed thermal energy harvesting system can pave a way towards high-throughput and sustainable energy harvesting.

Abstract Steady-state free and forced convective cooling of vertical, rectangular, 3 mm thick, 250 mm long fins, uniformly separated and protruding vertically upwards from a 250 mm × 190 mm isothermal horizontal base was investigated. For each combination of specified fin protrusion, horizontal forced air flow-rate in the direction along the fins and fin base temperature, the optimal fin spacing—corresponding to the maximum rate of heat loss—has been deduced. As the fin protrusion of the heat exchanger increases, this optimal value rises significantly in forced convection conditions, but declines slightly in the presence of free convection alone. The temperature distributions over the fins' surfaces were also studied, when the fin base was maintained at constant temperatures of either 40°C, 60°C or 80°C above that of the ambient environment. Large temperature depressions occurred near the leading edges and tips of the fins in forced convection, whereas much nearer isothermal temperature distributions were present under free convection conditions.

Abstract Steady-state free and forced convective cooling of vertical, rectangular, 3 mm thick, 250 mm long fins, uniformly separated and protruding vertically upwards from a 250 mm × 190 mm isothermal horizontal base was investigated. For each combination of specified fin protrusion, horizontal forced air flow-rate in the direction along the fins and fin base temperature, the optimal fin spacing—corresponding to the maximum rate of heat loss—has been deduced. As the fin protrusion of the heat exchanger increases, this optimal value rises significantly in forced convection conditions, but declines slightly in the presence of free convection alone. The temperature distributions over the fins' surfaces were also studied, when the fin base was maintained at constant temperatures of either 40°C, 60°C or 80°C above that of the ambient environment. Large temperature depressions occurred near the leading edges and tips of the fins in forced convection, whereas much nearer isothermal temperature distributions were present under free convection conditions.

Abstract The field of energy harvesting holds the promise of making our buildings “smart” if effective energy sources can be developed for use in ambient indoor conditions. Photovoltaics (PV), especially in its thin flexible form for easy integration, become a prime candidate for the aim, if tailored for low-density artificial light. We designed a test system which enabled us to measure the performance of PV devices under compact fluorescent lamp (CFL) and light-emitting diode (LED) illumination at different illuminance levels and compared polycrystalline and amorphous silicon cells with our own flexible dye solar cells (DSCs). Whereas poly-Si cells, with 15% outdoor efficiency, delivered at 200 lux under CFL only 2.8 μW/cm2 power density (and an efficiency of 4.4%), a-Si specifically designed for indoors, gave 5.9 μW/cm2 and 9.2% efficiency under the same CFL conditions (and 7.5% efficiency under LED). However, we show that the customization of flexible DSCs, by simply formulating ad-hoc less-concentrated, more transparent electrolytes, enabled these devices to outperform all others, providing average power densities of 8.0 μW/cm2 and 12.4% efficiencies under 200 lux CFL (more than quadruple compared to those measured at 1 sun), and 6.6 μW/cm2 and 10% efficiency under 200 lux LED illumination.

Abstract The field of energy harvesting holds the promise of making our buildings “smart” if effective energy sources can be developed for use in ambient indoor conditions. Photovoltaics (PV), especially in its thin flexible form for easy integration, become a prime candidate for the aim, if tailored for low-density artificial light. We designed a test system which enabled us to measure the performance of PV devices under compact fluorescent lamp (CFL) and light-emitting diode (LED) illumination at different illuminance levels and compared polycrystalline and amorphous silicon cells with our own flexible dye solar cells (DSCs). Whereas poly-Si cells, with 15% outdoor efficiency, delivered at 200 lux under CFL only 2.8 μW/cm2 power density (and an efficiency of 4.4%), a-Si specifically designed for indoors, gave 5.9 μW/cm2 and 9.2% efficiency under the same CFL conditions (and 7.5% efficiency under LED). However, we show that the customization of flexible DSCs, by simply formulating ad-hoc less-concentrated, more transparent electrolytes, enabled these devices to outperform all others, providing average power densities of 8.0 μW/cm2 and 12.4% efficiencies under 200 lux CFL (more than quadruple compared to those measured at 1 sun), and 6.6 μW/cm2 and 10% efficiency under 200 lux LED illumination.

Abstract Algae have been considered as a promising biodiesel feedstock. One of the major factors affecting large-scale algae technology application is poor wintering cultivation performance. In this study, an integrated approach is investigated combining freshwater microalgae Chlorella zofingiensis wintering cultivation in pilot-scale photobioreactors with artificial wastewater treatment. Mixotrophic culture with the addition of acetic acid (pH-regulation group) and autotrophic culture (control group) were designed, and the characteristics of algal growth, lipid and biodiesel production, and nitrogen and phosphate removal were examined. The results showed that, by using acetic acid three times per day to regulate pH at between 6.8 and 7.2, the total nitrogen (TN) and total phosphate (TP) removal could be increased from 45.2% to 73.5% and from 92.2% to 100%, respectively. Higher biomass productivity of 66.94 mg L−1 day−1 with specific growth rate of 0.260 day−1 was achieved in the pH-regulation group. The lipid content was much higher when using acetic acid to regulate pH, and the relative lipid productivity reached 37.48 mg L−1 day−1. The biodiesel yield in the pH-regulated group was 19.44% of dry weight, with 16–18 carbons as the most abundant composition for fatty acid methyl esters. The findings of the study prove that pH adjustment using acetic acid is efficient in cultivating C. zofingiensis in wastewater in winter for biodiesel production and nutrient reduction.

Abstract Algae have been considered as a promising biodiesel feedstock. One of the major factors affecting large-scale algae technology application is poor wintering cultivation performance. In this study, an integrated approach is investigated combining freshwater microalgae Chlorella zofingiensis wintering cultivation in pilot-scale photobioreactors with artificial wastewater treatment. Mixotrophic culture with the addition of acetic acid (pH-regulation group) and autotrophic culture (control group) were designed, and the characteristics of algal growth, lipid and biodiesel production, and nitrogen and phosphate removal were examined. The results showed that, by using acetic acid three times per day to regulate pH at between 6.8 and 7.2, the total nitrogen (TN) and total phosphate (TP) removal could be increased from 45.2% to 73.5% and from 92.2% to 100%, respectively. Higher biomass productivity of 66.94 mg L−1 day−1 with specific growth rate of 0.260 day−1 was achieved in the pH-regulation group. The lipid content was much higher when using acetic acid to regulate pH, and the relative lipid productivity reached 37.48 mg L−1 day−1. The biodiesel yield in the pH-regulated group was 19.44% of dry weight, with 16–18 carbons as the most abundant composition for fatty acid methyl esters. The findings of the study prove that pH adjustment using acetic acid is efficient in cultivating C. zofingiensis in wastewater in winter for biodiesel production and nutrient reduction.

Abstract The pressure-loss coefficient for a duct junction of square cross-section was determined using computational fluid dynamics (CFD). The predicted junction pressure-loss coefficient for combining flows was generally in good agreement with experimental data from the literature. The junction pressure-loss coefficient was associated with the flow from the side branch to the duct carrying the total flow.