• Energy Research

This study provides a new approach of electrode dependent anaerobic ammonium oxidation (electroanammox) in microbial fuel cell (MFC) integrated hybrid constructed wetlands (CWs). The study was carried out in three CWs, each with a horizontal flow (HF) followed by a vertical upflow (VUF). Two of the CWs were integrated with MFC, one was operated in closed circuit (CL) mode and the other in open circuit (OP) mode to determine the influence of electron transfer through an external electrical circuit. The initial nitrogen and carbon concentration were 40 mg/l and 880 mg/l respectively. The total nitrogen (TN), NH4+-N, TOC and COD removal achieved in CW-MFC-CL were 90.0 ± 1.15%, 94.4 ± 0.75%, 64.8 ± 3.0% and up to 99.5 ± 3.4%, respectively. The TN and NH4+-N removal in CW-MFC-CL was 20.0% and 13.6% higher than normal CW. Maximum current density achieved in CW-MFC-HF was of 75 mA/m3 and in CW-MFC-VUF was 156 mA/m3. Furthermore, the study revealed that even at low microbiological biomass, an MFC integrated CW operating in closed circuit gave higher removal of NH4+-N and COD than the normal CW and open circuit CW-MFC. Microbiological analysis shows the presence of already known nitrifier and denitrifer which indicates their role in electrode dependent nitrogen removal.

A two-stage hybrid Constructed Wetland (CW) integrated with a microbial fuel cell (MFC), and microbial electrolysis cell (MEC) has been assessed for treatment performance and clogging assessment and further compared with CW. The CW-MEC was operated with applied potential to the working electrode and compared with the performance of naturally adapted redox potential of the CW-MFC system. A complex synthetic municipal wastewater was used during the study, which was composed of trace metals, organics, inorganics, and dye. The study demonstrated that providing a constant potential to the working electrode in CW-MEC has resulted in high treatment performance and reduced sludge generation. The maximum chemical oxygen demand (COD), ammonium (NH4+), and phosphate (PO43-) removal achieved during treatment by CW-MEC at 24 h hydraulic retention time was 89 ± 6%, 72 ± 6% and 93 ± 2%, respectively. ICP-MS results indicated that trace metal removals were also higher in CW-MEC than in CW alone (p < 0.05). At the end of the experiment, significant volumetric change (total volume of the microcosm) occurred in CW (1.3 L), which indicates high sludge generation, whereas it was lesser in CW-MEC (0.3 L) and in CW-MFC (0.5 L). Further, Energy Dispersive X-ray (EDX) spectroscopy results indicated low levels of metal precipitation in the CW-MEC system. Based on the Shannon diversity index, the CW-MEC was assessed to be characterised by high species richness and diversity. The observations from this study indicate that the applied potential at the working electrode has a significant impact on treatment performance and clogging behaviour of the system.

Climate change is driving global endeavours to achieve carbon neutrality and renewable energy expansion. Sludge, a nutrient-rich waste, holds energy potential yet poses environmental challenges that need proper management. We conducted a comprehensive life cycle assessment to evaluate the energy balance and environmental footprint of the most commonly used sludge management scenarios in BRICS countries, namely Brazil, Russia, India, China, and South Africa. Technologies such as incineration and anaerobic digestion with energy recovery units (i.e., cogeneration unit) maximize energy balance and minimize the environmental footprint, with incineration showing a superior performance. Shifting sludge management scenarios from the worst to the best can boost energy production by 1.4-98.4 times and cut the environmental footprint by 1.5-21.4 times. In 2050, these improvements could lead to a 98-fold boost in energy generation and a 25-fold drop in carbon emissions, according to the Announced Pledges Scenarios. Optimizing parameters such as volatile solids and anaerobic digestion efficiency further boosts energy output and minimizes the environmental footprint. This study offers robust evidence to support sustainable sludge management and thus promote energy recovery and carbon neutrality goals, guide technological transitions, and inform policymaking for sustainable development.

AbstractThe chemical pollution crisis severely threatens human and environmental health globally. To tackle this challenge the establishment of an overarching international science–policy body has recently been suggested. We strongly support this initiative based on the awareness that humanity has already likely left the safe operating space within planetary boundaries for novel entities including chemical pollution. Immediate action is essential and needs to be informed by sound scientific knowledge and data compiled and critically evaluated by an overarching science–policy interface body. Major challenges for such a body are (i) to foster global knowledge production on exposure, impacts and governance going beyond data-rich regions (e.g., Europe and North America), (ii) to cover the entirety of hazardous chemicals, mixtures and wastes, (iii) to follow a one-health perspective considering the risks posed by chemicals and waste on ecosystem and human health, and (iv) to strive for solution-oriented assessments based on systems thinking. Based on multiple evidence on urgent action on a global scale, we call scientists and practitioners to mobilize their scientific networks and to intensify science–policy interaction with national governments to support the negotiations on the establishment of an intergovernmental body based on scientific knowledge explaining the anticipated benefit for human and environmental health.

The alpine area of the Australian mainland is highly sensitive to climate and environmental change, and potentially vulnerable to ecosystem tipping points. Over the next two decades the Australian alpine region is predicted to experience temperature increases of at least 1 °C, coupled with a substantial decrease in snow cover. Extending the short instrumental record in these regions is imperative to put future change into context, and potentially provide analogues of warming. We reconstructed past temperatures, using a lipid biomarker palaeothermometer technique and mercury flux changes for the past 3500 years from the sediments of Club Lake, a high-altitude alpine tarn in the Snowy Mountains, southeastern Australia. Using a multi-proxy framework, including pollen and charcoal analyses, high-resolution geochemistry, and ancient microbial community composition, supported by high-resolution 210Pb and AMS 14C dating, we investigated local and regional ecological and environmental changes occurring in response to changes in temperature. We find the region experienced a general warming trend over the last 3500 years, with a pronounced climate anomaly occurring between 1000 and 1600 cal yrs. BP. Shifts in vegetation took place during this warm period, characterised by a decline in alpine species and an increase in open woodland taxa which co-occurred with an increase in regional fire activity. Given the narrow altitudinal band of Australian alpine vegetation, any future warming has the potential to result in the extinction of alpine species, including several endemic to the area, as treelines are driven to higher elevations. These findings suggest ongoing conservation efforts will be needed to protect the vulnerable alpine environments from the combined threats of climate changes, fire and invasive species.