• Energy Research
• Clean Technologies close

One of society’s major current challenges is carbon dioxide emissions and their consequences. In this context, new technologies for carbon dioxide (CO2) capture have attracted much attention. One of these is carbon capture and utilization (CCU). This work focuses on the latest trends in a holistic approach to carbon dioxide capture and utilization. Absorption, adsorption, membranes, and chemical looping are considered for CO2 capture. Each CO2 capture technology is described, and its benefits and drawbacks are discussed. For the use of carbon dioxide, various possible applications of CCU are described, starting with the utilization of carbon dioxide in agriculture and proceeding to the conversion of CO2 into fuels (catalytic processes), chemicals (photocatalytic processes), polymers, and building supplies. For decades, carbon dioxide has been used in industrial processes, such as CO2-enhanced oil recovery, the food industry, organic compound production (such as urea), water treatment, and, therefore, the production of flame retardants and coolants. There also are several new CO2-utilization technologies at various stages of development and exploitation, such as electrochemical conversion to fuels, CO2-enhanced oil recovery, and supercritical CO2. At the end of this review, future opportunities are discussed regarding machine learning (ML) and life cycle assessment (LCA).

The use of biomass as a renewable energy source is currently a reality, mainly due to the role it can play in replacing fossil energy sources. Within this possibility, coal substitution in the production of electric energy presents itself as a strong alternative with high potential, mostly due to the possibility of contributing to the decarbonization of energy production while, at the same time, contributing to the circularization of energy generation processes. This can be achieved through the use of biomass waste forms, which have undergone a process of improving their properties, such as torrefaction. However, for this to be viable, it is necessary that the biomass has a set of characteristics similar to those of coal, such that its use may occur in previously installed systems. In particular, with respect to grindability, which is associated with one of the core equipment technologies of coal-fired power plants—the coal mill. The objective of the present study is to determine the potential of certain residues with agroforestry origins as a replacement for coal in power generation by using empirical methods. Selected materials—namely, almond shells, kiwifruit pruning, vine pruning, olive pomace, pine woodchips, and eucalyptus woodchips—are characterized in this regard. The materials were characterized in the laboratory and submitted to a torrefaction process at 300 °C. Then, the Statistical Grindability Index and the Hardgrove Grindability Index were determined, using empirical methods derived from coal analysis. The results obtained indicate the good potential of the studied biomasses for use in large-scale torrefaction processes and as replacements for coal in the generation of electrical energy. However, further tests are still needed, particularly relating to the definition of the ideal parameters of the torrefaction process, in order to optimize the grindability of the materials.

Currently, the search for alternative sources of energy is not only due to the scarcity of non-renewable sources, since these still have an availability capable of meeting actual consumption needs, but also due to the negative environmental impacts that its consumption presents. Thus, the use of biomass as a renewable and sustainable energy source is increasingly presented as an alternative that must be taken into account. Torrefaction is a conversion process that aims to improve the properties of biomass through its thermal decomposition at temperatures between 220 and 320 °C. Torrefaction can be defined by several variables, which have an impact on the final quality of the torrefied biomass. Therefore, there is an increase in the number of studies involving this topic, in order to improve the production of biomass and its use as a renewable energy source, in addition to reducing the costs of this process. In this work, a protocol was developed for a laboratory test procedure to produce low-cost torrefied biomass samples using equipment that can present a cost reduction of around 90%. The samples were analyzed to prove the viability of the developed protocol. The results obtained agree with the current literature, also confirming the improvement of the biomass properties. This work can serve as a platform for the development of other technologies, such as gasification for the production of hydrogen from torrefied biomass.

Agroforestry waste stores a considerable amount of energy that can be used. Portugal has great potential to produce bioenergy. The waste generated during agricultural production and forestry operation processes can be used for energy generation, and it can be used either in the form in which it is collected, or it can be processed using thermochemical conversion technologies, such as torrefaction. This work aimed to characterize the properties of a set of residues from agroforestry activities, namely rice husk, almond husk, kiwi pruning, vine pruning, olive pomace, and pine woodchips. To characterize the different materials, both as-collected and after being subjected to a torrefaction process at 300 °C, thermogravimetric analyses were carried out to determine the moisture content, ash content, fixed carbon content, and the content of volatile substances; elementary analyses were performed to determine the levels of carbon, nitrogen, hydrogen, and oxygen, and the high and low heating values were determined. With these assumptions, it was observed that each form of residual biomass had different characteristics, which are important to know when adapting to conversion technology, and they also had different degrees of efficiency, that is, the amount of energy generated and potentially used when analyzing all factors.

The common use of tires is responsible for the production of large quantities of waste worldwide, which are landfilled or energetically recovered, with higher economical cost and known environmentally harmful consequences. This type of problem must be studied, and all efforts must be conducted to eliminate, or at least mitigate, such high costs. The use of thermochemical conversion processes, such as pyrolysis, can allow the recycling and the reuse of raw materials for the tire industry, namely, in the production of carbon black, usually produced using the controlled combustion of fossil fuels. This article reports the production of torrefied and carbonized waste tire samples using a laboratorial procedure, and their subsequent laboratory characterization, specifically the elemental and proximate analysis. This preliminary approach found that carbon concentration in the produced rubber char reached values higher than 75%, indicating the possibility of its reuse in the production of carbon black to in turn be used in the production of new tires or other industrial rubber materials. The possibility of using this rubber char for other uses, such as energy recovery, is still depending on further studies, namely, the evaluation of the amount of sulfur present in the final product.