• Energy Research

Microwave-assisted extraction (MAE) of chitosan from dried fungal biomass of Rhizopus oryzae NRRL1526, obtained by culturing on potato dextrose broth (PDB), was performed and the optimal conditions required were identified using statistical analysis for the first time in this study. This microwave-assisted extraction (MAE) was compared against the conventional autoclave assisted method of chitosan extraction. The full factorial experimental design was used to investigate the impact of operating parameters of MAE, microwave power (100 W-500 W), and duration (10 min-30 min), on alkaline insoluble material (AIM) yield, chitosan yield, and degree of deacetylation (DDA). The effect of operating conditions was then evaluated using full factorial data analysis and optimum condition for MAE of chitosan was identified using response surface methodology to be 300 W and 22 min. This optimum condition identified was then further evaluated and the chitosan obtained characterized. Higher chitosan yield of 13.43 ± 0.3% (w/w) of fungal biomass was obtained when compared to that obtained, 6.67% ± 0.3% (w/w) of dry biomass, for the conventional extraction process. MAE yielded chitosan of higher degree of deacetylation, 94.6 ± 0.9% against 90.6 ± 0.5% (conventional heating), but the molecular weight was observed to be similar to that obtained by using conventional autoclave heating. MAE of chitosan was observed to yield a higher quantity of chitosan when compared to conventional extraction process and obtained chitosan exhibited a higher degree of deacetylation as well as molecular weight. The lower energy consumption of 0.11 kW h for MAE (5 kW h for conventional process) and the concomitant reduction in the energy bill to 1.1 cents from 50 cents, in addition to the above results, show that microwave irradiation is a more efficient and environment-friendly means to obtain chitosan from fungal biomass.

Microwave-assisted extraction (MAE) of chitosan from dried fungal biomass of Rhizopus oryzae NRRL1526, obtained by culturing on potato dextrose broth (PDB), was performed and the optimal conditions required were identified using statistical analysis for the first time in this study. This microwave-assisted extraction (MAE) was compared against the conventional autoclave assisted method of chitosan extraction. The full factorial experimental design was used to investigate the impact of operating parameters of MAE, microwave power (100 W-500 W), and duration (10 min-30 min), on alkaline insoluble material (AIM) yield, chitosan yield, and degree of deacetylation (DDA). The effect of operating conditions was then evaluated using full factorial data analysis and optimum condition for MAE of chitosan was identified using response surface methodology to be 300 W and 22 min. This optimum condition identified was then further evaluated and the chitosan obtained characterized. Higher chitosan yield of 13.43 ± 0.3% (w/w) of fungal biomass was obtained when compared to that obtained, 6.67% ± 0.3% (w/w) of dry biomass, for the conventional extraction process. MAE yielded chitosan of higher degree of deacetylation, 94.6 ± 0.9% against 90.6 ± 0.5% (conventional heating), but the molecular weight was observed to be similar to that obtained by using conventional autoclave heating. MAE of chitosan was observed to yield a higher quantity of chitosan when compared to conventional extraction process and obtained chitosan exhibited a higher degree of deacetylation as well as molecular weight. The lower energy consumption of 0.11 kW h for MAE (5 kW h for conventional process) and the concomitant reduction in the energy bill to 1.1 cents from 50 cents, in addition to the above results, show that microwave irradiation is a more efficient and environment-friendly means to obtain chitosan from fungal biomass.

Recycled polylactic acid (PLAr) was reinforced with treated nanocellulosic hemp fibers for biocomposite fabrication. Cellulosic fibers were extracted from hemp fibers chemically and treated enzymatically. Treated nanocellulosic fibers (NCF) were analyzed by Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. Biocomposite fabrication was done with PLAr and three concentrations of treated NCF (0.1%, 0.25%, and 1% (v/v)) and then studied for thermal stability and mechanical properties. Increased thermal stability was observed with increasing NCF concentrations. The highest value for Young’s modulus was for PLAr + 0.25% (v/v) NCF (250.28 ± 5.47 MPa), which was significantly increased compared to PLAr (p = 0.022). There was a significant decrease in the tensile stress at break point for PLAr + 0.25% (v/v) NCF and PLAr + 1% (v/v) NCF as compared to control (p = 0.006 and 0.002, respectively). No significant difference was observed between treatments for tensile stress at yield.

Recycled polylactic acid (PLAr) was reinforced with treated nanocellulosic hemp fibers for biocomposite fabrication. Cellulosic fibers were extracted from hemp fibers chemically and treated enzymatically. Treated nanocellulosic fibers (NCF) were analyzed by Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. Biocomposite fabrication was done with PLAr and three concentrations of treated NCF (0.1%, 0.25%, and 1% (v/v)) and then studied for thermal stability and mechanical properties. Increased thermal stability was observed with increasing NCF concentrations. The highest value for Young’s modulus was for PLAr + 0.25% (v/v) NCF (250.28 ± 5.47 MPa), which was significantly increased compared to PLAr (p = 0.022). There was a significant decrease in the tensile stress at break point for PLAr + 0.25% (v/v) NCF and PLAr + 1% (v/v) NCF as compared to control (p = 0.006 and 0.002, respectively). No significant difference was observed between treatments for tensile stress at yield.

Anaerobic digestion (AD) under psychrophilic temperature has only recently garnered deserved attention. In major parts of Europe, USA, Canada and Australia, climatic conditions are more suited for psychrophilic (<20 ℃) rather than mesophilic (35 - 37 ℃) and thermophilic (55 - 60 ℃) AD. Low temperature has adverse effects on important cellular processes which may render the cell biology inactive. Moreover, cold climate can also alter the physical and chemical properties of wastewater, thereby reducing the availability of substrate to microbes. Hence, the use of low temperature acclimated microbial biomass could overcome thermodynamic constraints and carry out flexible structural and conformational changes to proteins, membrane lipid composition, expression of cold-adapted enzymes through genotypic and phenotypic variations. Reduction in organic loading rate is beneficial to methane production under low temperatures. Moreover, modification in the design of existing reactors and the use of hybrid reactors have already demonstrated improved methane generation in the lab-scale. This review also discusses some novel strategies such as direct interspecies electron transfer (DIET), co-digestion of substrate, bioaugmentation, and bioelectrochemical system assisted AD which present promising prospects. While DIET can facilitate syntrophic electron exchange in diverse microbes, the addition of organic-rich co-substrate can help in maintaining suitable C/N ratio in the anaerobic digester which subsequently can enhance methane generation. Bioaugmentation with psychrophilic strains could reduce start-up time and ensure daily stable performance for wastewater treatment facilities at low temperatures. In addition to the technical discussion, the economic assessment and future outlook on psychrophilic AD are also highlighted.

Anaerobic digestion (AD) under psychrophilic temperature has only recently garnered deserved attention. In major parts of Europe, USA, Canada and Australia, climatic conditions are more suited for psychrophilic (<20 ℃) rather than mesophilic (35 - 37 ℃) and thermophilic (55 - 60 ℃) AD. Low temperature has adverse effects on important cellular processes which may render the cell biology inactive. Moreover, cold climate can also alter the physical and chemical properties of wastewater, thereby reducing the availability of substrate to microbes. Hence, the use of low temperature acclimated microbial biomass could overcome thermodynamic constraints and carry out flexible structural and conformational changes to proteins, membrane lipid composition, expression of cold-adapted enzymes through genotypic and phenotypic variations. Reduction in organic loading rate is beneficial to methane production under low temperatures. Moreover, modification in the design of existing reactors and the use of hybrid reactors have already demonstrated improved methane generation in the lab-scale. This review also discusses some novel strategies such as direct interspecies electron transfer (DIET), co-digestion of substrate, bioaugmentation, and bioelectrochemical system assisted AD which present promising prospects. While DIET can facilitate syntrophic electron exchange in diverse microbes, the addition of organic-rich co-substrate can help in maintaining suitable C/N ratio in the anaerobic digester which subsequently can enhance methane generation. Bioaugmentation with psychrophilic strains could reduce start-up time and ensure daily stable performance for wastewater treatment facilities at low temperatures. In addition to the technical discussion, the economic assessment and future outlook on psychrophilic AD are also highlighted.

Abstract The use of biodiesel-derived glycerol as a carbon source for single cell oil (SCO) production is a biorefinery engineering strategy that aims to valorize the by-product waste and make the microbial lipid production process more cost-effective. This work aimed to improve the capacity of Yarrowia lipolytica to produce large amounts of lipids and replace genetic engineering by a metabolic approach based on the stimulation of the rate-limiting enzymes and reducing the activation energy thereby increasing the rate of lipids synthesis. The effects of biotin and leucine addition on the lipid content of Y. lipolytica have been investigated. The lipid content of Y. lipolytica was strongly influenced by the addition of biotin. In fact, an increase in biotin concentration from 25 μg/L to 200 μg/L practically increased the lipid concentration up to 15 g/L. Besides, to channel metabolic flux into lipid biosynthesis, the addition of citric acid as lipid precursor led to an increase in total catabolism activation and lipid accumulation to reach around 63% (w/w). The biochemical approach can be a useful target for improving the efficiency of lipid-producing yeast strain rather than genetic engineering.

Abstract The use of biodiesel-derived glycerol as a carbon source for single cell oil (SCO) production is a biorefinery engineering strategy that aims to valorize the by-product waste and make the microbial lipid production process more cost-effective. This work aimed to improve the capacity of Yarrowia lipolytica to produce large amounts of lipids and replace genetic engineering by a metabolic approach based on the stimulation of the rate-limiting enzymes and reducing the activation energy thereby increasing the rate of lipids synthesis. The effects of biotin and leucine addition on the lipid content of Y. lipolytica have been investigated. The lipid content of Y. lipolytica was strongly influenced by the addition of biotin. In fact, an increase in biotin concentration from 25 μg/L to 200 μg/L practically increased the lipid concentration up to 15 g/L. Besides, to channel metabolic flux into lipid biosynthesis, the addition of citric acid as lipid precursor led to an increase in total catabolism activation and lipid accumulation to reach around 63% (w/w). The biochemical approach can be a useful target for improving the efficiency of lipid-producing yeast strain rather than genetic engineering.