• Energy Research

Oxidation of ammonia to nitrite rather than nitrate is critical for nitritation process for wastewater treatment. We proposed a promising approach by using controlled ultrasonic treatment to enhance the activity of ammonia-oxidizing bacteria (AOB) and suppress that of nitrite-oxidizing bacteria (NOB). Batch activity assays indicated that when ultrasound was applied, AOB activity reached a peak level and then declined but NOB activity deteriorated continuously as the power intensity of ultrasound increased. Kinetic analysis of relative microbial activity versus ultrasonic energy density was performed to investigate the effect of operational factors (power, sludge concentration, and aeration) on AOB and NOB activities and the test parameters were selected for reactor tests. Laboratory sequential batch reactor (SBR) was further used to test the ultrasonic stimulus with 8 h per day operational cycle and synthetic waste urine as influent. With specific ultrasonic energy density of 0.09 kJ/mg VSS and continuously fed influent containing above 200 mg NH3-N/L, high AOB reproductive activity was achieved and nearly complete conversion of ammonia-N to nitrite was maintained. Microbial structure analysis confirmed that the treatment changed community of AOB, NOB, and heterotrophs. Known AOB Nitrosomonas genus remained at similar level in the biomass while typical NOB Nitrospira genus disappeared in the SBR under ultrasonic treatment and after the treatment was off for 30 days.

Siloxane has become an environmental concern as poly-dimethylsiloxanes are extensively applied. Siloxanes in biogas generated from landfill and anaerobic digestion at wastewater treatment plants must be removed before the biogas is used for electricity generation in case of production of silicon precipitates inside an engine. This paper reviews the updated research results on siloxanes including physical-chemical properties, contaminant sources, migration and transformation in environment, biodegradability, concentration profile in biogas, and current technologies for siloxane removal. The topics of future study are discussed, focusing on mechanism of biodegradation and microbiology.

Recently, upflow microaerobic sludge blanket (UMSB) system has been developed to remove ammonium and organic matter simultaneously. This study aims to establish influent and operational conditions promoting anammox-based nitrogen removal process in the UMSB reactor by using a modified Activated Sludge Model. Experiments were performed on a laboratory-scale UMSB reactor treated piggery wastewater for over two years. With the experimentally determined model parameters, the established model well simulated the UMSB reactor performance. The maximum anammox growth rate was calibrated to be 0.41 d-1 at 35 °C. Further simulations showed that UMSB reactor operated with high influent organics or nitrogen loading rates at temperature above 15 °C can achieve efficient nitrogen removal (>70%). The nitrogen loading over 0.6 kg N/(m3·d)) significantly favors anammox activity. UMSB could also be a promising system for nitrogen removal from low-strength ammonium wastewater with fluctuated COD influence. These results provide support to UMSB design and operational optimization.

Iron salts (i.e. FeCl3) are the most used chemicals in the urban wastewater system. Iron is commonly dosed into sewage or the mainstream system, which provides multiple benefits such as enhanced phosphorus removal and improved sludge settleability/dewaterability. This study reported and demonstrated a new approach that dosed FeCl3 into returned sludge in order to bring two more benefits to wastewater management: short-cut nitrogen removal via the nitrite pathway and less biomass production. This approach is achieved based on our findings that with similar amount of FeCl3, centralized iron dosing into a sidestream sludge unit generated iron concentration two orders of magnitude higher than the common mainstream dosing (e.g. 10-40 mg Fe/L-wastewater), leading to sludge acidification (pH = 2.1) with Fe (III) hydrolysis. Together with accumulated nitrite in the supernatant of the sludge, ppm-level of free nitrous acid was generated and thus enabled sludge disintegration, cell lysis, and selective elimination of nitrite-oxidizing bacteria (NOB). Long-term effects on nitrifying bacteria and overall reactor performance were evaluated using two laboratory reactor experiments for over one year. The experimental reactor showed stable nitrite accumulation with an average NO2-/(NO2- + NO3-) ratio above 80% and ∼30% observed biomass yield reduction compared to those in control reactors. In addition, the centralized sludge dosing strategy still provided benefits such as improved settleability and dewaterability of sludge and enhanced phosphorus removal.

This study investigated biofilm establishment, biofilm structure, and microbial community composition of biofilms in three laboratory-scale moving bed biofilm reactors. These reactors were filled with three types of plastic carriers with varied depths of living space for microbial growth. The reactors were operated under the same influent and operational conditions. Along with the operation, the results showed that carriers with grids of 50 μm in height delayed the biofilm development and formed the thinnest biofilm and a carpet-like structure with the lowest α-diversity. In comparison, another two carriers with grids of 200 and 400 μm in height formed thick biofilms and large colonies with more voids and channels. Quantified properties of biofilm thickness, biomass, heterogeneity, portion of the biofilm exposed to the nutrient, and maximum diffusion distance were examined, and the results demonstrated that they almost (except for heterogeneity) strongly correlated to the α-diversity of microbial community. These illustrate that depth of living space, as an important parameter for carrier, could drive the formation of biofilm structure and community composition. It improves understanding of influencing factors on biofilm establishment, structure and its microbial community, and would be helpful for the design of biofilm processes.