• Energy Research

The expansion of sewage networks and treatment facilities results in considerable amounts of municipal sludge, which is essential for biogas production as part of energy diversification efforts. Principal Component Analysis (PCA) demonstrated a strong correlation between biogas production and its utilization in power generation units. Modernization efforts led to an increase in biogas utilization in power units but a decrease in boiler utilization, independent of the overall biogas production levels. The general linear model (GLM) further confirmed that biogas production was positively influenced by the amount of waste digested, while utilization in power units increased post modernization. A repeated measures ANOVA (Analysis of Variance) indicated significant increases in both dry matter and mineral content in digested sludge compared to raw sludge. SIMPER (Similarity Percentage) analysis revealed that the addition of glycerin water significantly reduced the nitrogen, ammonium nitrogen, and calcium content, while modernization increased these elements and slightly decreased the magnesium concentration. Multivariate dispersion analysis showed that samples treated with glycerin water exhibited less variability in metal content. Regression models explored the factors influencing mineral elements and dry mass in fermented sludge. The zinc content was positively associated with mineral content, while copper showed a negative correlation. The addition of glycerin water increased the mineral content, whereas modernization had the opposite effect. The nitrogen content was negatively correlated with dry mass. These findings provide valuable insights into optimizing sewage sludge treatment and biogas production processes by underlining the approaches for enhancing sludge properties to support efficient biogas production.

Abstract The aim of the study was to develop an effective treatment of post-digestion liquors highly-loaded with biogenic and organic substances. The scope of the research project encompassed: mesophilic anaerobic digestion of waste activated sludge (WAS) as well as the treatment of post-digestion liquors, coming from the most appropriate HRT value of 25 days, in the process of ammonium magnesium phosphate (struvite) precipitation targeted at ammonia nitrogen binding and a subsequent reverse osmosis (RO) process. It was established that the method combining chemical precipitation and high-pressure filtration ensures a high degree of contaminants removal allowing for a direct release of treated liquors into the natural reservoir. However, in order to decrease the residual NH4+ concentration (6.1 mg NH4+/dm3) in the purified post-digestion liquors below the level allowing for a direct release to the natural reservoir, it turned out to be necessary to apply increased molar ratio of magnesium and phosphates (Mg:NH4+: PO43-= 1.5:1:1.5).

Biogas has improved due to technological advancements, environmental awareness, policy support, and research innovation, making it a more cost-effective and environmentally friendly renewable energy source. The Generalized Linear Model (GLM) was employed to examine the relationship between purchased and generated energy from 2007 to 2023. Metrics such as deviance, log likelihood, and dispersion phi were examined to assess model fit. The Mann–Kendall test was utilized to detect trends in energy datasets. Biochemical Oxygen Demand (BOD5) and Chemical Oxygen Demand (COD) reduction was significant, exceeding 97% from 2014 to 2023. However, treated sewage displayed limited susceptibility to biological degradation, with COD to BOD5 ratios increasing from 2.28 to 6.59 for raw sewage and from 2.33 to 7.05 for treated sewage by 2023. Additionally, the efficiency of sewage purification processes was calculated, and multivariate regression analysis was conducted on gas composition data. Principal Coordinate Ordination (PCO) and k-means clustering were used for dimensionality reduction and biogas component clustering, respectively. This research showed that biogas from the waste water treatment process can be used, particularly in methane production. Technological advancements have made biogas production more efficient, enhancing energy generation within a circular economy framework.

Abstract The technological concept ensuring highly efficient co-digestion of by-products from the production of biodiesel and sewage sludge was examined. Rapeseed cakes (RC) 1–5% addition to waste activated sludge (WAS) 95–99% in digesters, positively influenced the degree of biodegradation of organic matter and the quantity and quality of the biogas produced. Under the optimal conditions (HRT = 20–22 days), the co-digestion mixtures (WAS + microwave disintegration + RC) generated double the amount of biogas, containing approximately 10–12% more CH4, than the samples which had the sewage sludge only. Under these conditions, the biogas yield increased by approximately 48–82% depending on the co-substrate used and was further improved via the introduction of microwave pre-treatment. After testing at the pilot scale, this method could be considered as a sustainable alternative to conventional methods for WAS and RC treatment.

Due to rapid urbanization, the number of wastewater treatment plants (WWTP) has increased, and so has the associated waste generated by them. Sustainable management of this waste can lead to the creation of energy-rich biogas via fermentation processes. This review presents recent advances in the anaerobic digestion processes that have led to greater biogas production. Disintegration techniques for enhancing the fermentation of waste activated sludge can be apportioned into biological, physical and chemical means, which are included in this review; they were mainly compared and contrasted in terms of the ensuing biogas yield. It was found that ultrasonic- and microwave-assisted disintegration provides the highest biogas yield (>500%) although they tend to be the most energy demanding processes (>10,000 kJ kg−1 total solids).

Abstract The aim of this study was to develop an effective thermochemical method for treatment of industrial hemp, in order to increase its bioconversion to biofuels and bio-products. Industrial hemp was subjected to various thermochemical pretreatments using: alkaline (3 % NaOH), oxidative (3 % H2O2 at pH 11.5) and glycerol-based methods (70-90 % of glycerol, 1-3 % NaOH), prior to enzymatic hydrolysis with Cellic® CTec2/Cellic® HTec2 (15 FPU∙g−1 glucan). Innovative pretreatment with glycerol fraction (80 % glycerol content, 2 % NaOH, 12.5 % biomass loading) showed to be superior over commonly used alkaline and oxidative methods with respect to by-products generation and sugar losses. Integrated process of ethanol production from enriched cellulose fraction (172 kg EtOH∙Mg−1 of dry hemp) and succinic production from xylose-rich residue after ethanol fermentation (59 kg∙Mg−1 of dry hemp) allowed to convert about 97 % of sugars released (glucose and xylose) during enzymatic hydrolysis of pre-treated biomass. The present study showed that it is possible to replace 50 % of the costly yeast extract, used during succinic fermentation as nitrogen source, by alternative nitrogen source (rapeseed cakes) without significant deterioration of succinic yield. Pretreatment liquor after lignin precipitation (52 kg∙Mg−1 of biomass treated) exhibited a high biodegradability (92 %) and allowed to produce 420 m3 CH4/Mg VS). Results obtained in this study clearly document the possibility of biofuels (bioethanol, biogas) and bio-chemicals production from industrial hemp, in a biorefinery approach.