• Energy Research

A two-stage system was developed which combines the biological degradation of keratin-rich waste with the production of biogas. Chicken feather waste was treated biologically with a recombinant Bacillus megaterium strain showing keratinase activity prior to biogas production. Chopped, autoclaved chicken feathers (4%, W/V) were completely degraded, resulting in a yellowish fermentation broth with a level of 0.51 mg/mL soluble proteins after 8 days of cultivation of the recombinant strain. During the subsequent anaerobic batch digestion experiments, methane production of 0.35 Nm3/kg dry feathers (i.e., 0.4 Nm3/kg volatile solids of feathers), corresponding to 80% of the theoretical value on proteins, was achieved from the feather hydrolyzates, independently of the pre-hydrolysis time period of 1, 2 or 8 days. Cultivation with a native keratinase producing strain, Bacillus licheniformis resulted in only 0.25 mg/mL soluble proteins in the feather hydrolyzate, which then was digested achieving a maximum accumulated methane production of 0.31 Nm3/kg dry feathers. Feather hydrolyzates treated with the wild type B. megaterium produced 0.21 Nm3 CH4/kg dry feathers as maximum yield.

Oil palm empty fruit bunches (OPEFB), a waste lignocellulosic material, which is the main byproduct of vegetable oil production industries in Indonesia and Malaysia, was utilized as a source for biogas production. Pretreatments using NaOH as well as phosphoric acid were investigated to improve the biogas production. Clear positive effects of the pretreatments on the yield of methane were observed. The best improvement was achieved when 8% NaOH for 60 min was used for the pretreatment, which resulted in 100% improvement in the yield of methane production. In addition, treatment with phosphoric acid resulted in 40% improvement in the methane yield compared with that of the untreated material. The results showed that the carbohydrate content of OPEFB could be efficiently converted to methane under the anaerobic digestion process. 97% of the theoretical value of methane production was achieved after the pretreatment with NaOH for 60 min. Moreover, the initial rate of methane production was also increased by more than 85% after the treatment with NaOH compared with that of the untreated OPEFB.

Production of biogas from different organic materials is a most interesting source of renewable energy. The biomethane potential (BMP) of these materials has to be determined to get insight in design parameters for anaerobic digesters. Although several norms and guidelines for BMP tests exist, inter-laboratory tests regularly show high variability of BMPs for the same substrate. A workshop was held in June 2015, in Leysin, Switzerland, with over 40 attendees from 30 laboratories around the world, to agree on common solutions to the conundrum of inconsistent BMP test results. This paper presents the consensus of the intense roundtable discussions and cross-comparison of methodologies used in respective laboratories. Compulsory elements for the validation of BMP results were defined. They include the minimal number of replicates, the request to carry out blank and positive control assays, a criterion for the test duration, details on BMP calculation, and last but not least criteria for rejection of the BMP tests. Finally, recommendations on items that strongly influence the outcome of BMP tests such as inoculum characteristics, substrate preparation, test setup, and data analysis are presented to increase the probability of obtaining validated and reproducible results.

This Special Issue of Energies contains successful submissions [...]

In this study, predominant bacterial and archaeal populations and their roles during anaerobic mono-digestion of food waste (FW) and co-digestion of FW with straw pellets (SP) at thermophilic temperature (53 ± 1 °C) were assessed by Next Generation Sequencing (NGS) analysis at organic loading rates (OLRs) of 3.0 and 7.0 gVS/L/d. Depending on the seed; results revealed that Firmicutes, Bacteroidetes, and Proteobacteria were, respectively the most prevalent bacterial phyla at both OLRs investigated. On the other hand, Euryarchaeota was dominated by methanogens playing crucial role in biogas production and correlated mainly with the activities of Methanobacteria and Methanomicrobia at class level. Acetoclastic Methanosaetae was the predominant genus at OLR = 3.0 gVS/L/d; however, shared the same predominance with hydrogenotrophic methanogens Methanospirillium at the highest OLR. Although no clear effect in response to straw addition at OLR of 3.0 gVS/L/d could be seen in terms of methanogenic archaea at genus level, hydrogenotrophic methanogens revealed some shift from Methanobacterium to Methanospirillium at higher OLR. Nevertheless, no prominent microbial shift in the presence of wheat straw at increased OLR was likely due to adapted inoculation at start-up which was also demonstrated by relatively stable biogas yields during co-digestion.

Lignocellulosic biomass represents a great potential for biogas production. However, a suitable pretreatment is needed to improve their digestibility. This study investigates the effects of an organic solvent, N-Methylmorpholine-N-oxide (NMMO) at temperatures of 120 and 90 °C, NMMO concentrations of 75 and 85% and treatment times of 3 and 15 h on the methane yield. The long-term effects of the treatment were determined by a semicontinuous experiment. The best results were obtained using 75% NMMO at 120 °C for 15 h, resulting in 141% increase in the methane production. These conditions led to a decrease by 9% and an increase by 8% in the lignin and in the carbohydrate content, respectively. During the continuous digestion experiments, a specific biogas production rate of 92 NmL/gVS/day was achieved while the corresponding rate from the untreated sample was 53 NmL/gVS/day. The operation conditions were set at 4.4 gVS/L/day organic loading rate (OLR) and hydraulic retention time (HRT) of 20 days in both cases. NMMO pretreatment has substantially improved the digestibility of forest residues. The present study shows the possibilities of this pretreatment method; however, an economic and technical assessment of its industrial use needs to be performed in the future.