• Energy Research

Ukraine is an energy-dependent country, with less that 50% of its energy consumption fulfilled by its own resources. Natural gas is of paramount importance, especially for industry and society. Therefore, there is an urgent need to search for alternative and potential energy sources, such as gas hydrate deposits in the Black Sea, which can reduce the consumption of imported gas. It is necessary to refine the process parameters of the dissociation of gas hydrate deposits with a heterogeneous structure. The analyzed known geological–geophysical data devoted to the study of the offshore area and the seabed give grounds to assert the existence of a significant amount of hydrate deposits in the Black Sea. An integrated methodological approach is applied, which consists of the development of algorithms for analytical and laboratory studies of gas volumes obtained during the dissociation of deposits with a heterogeneous structure. These data are used for the computer modelling of the dissociation zone in the Surfer-8.0 software package based on the data interpolation method, which uses three methods for calculating the volumes of modelling bodies. A 3D grid-visualization of the studied part of the gas hydrate deposit has been developed. The dissociation zone parameters of gas hydrate deposits with different shares of rock intercalation, that is, the minimum and maximum diameters, have been determined, and the potentially recoverable gas volumes have been assessed. The effective time of the process of gas hydrate deposit dissociation has been substantiated. The obtained research results of the dissociation process of gas hydrate deposits can be used in the development of new technological schemes for gas recovery from the deep-water Black Sea area.

Currently, offshore areas have become the hotspot of global gas and oil production. They have significant reserves and production potential. Offshore platforms are energy-intensive facilities. Most of them are equipped with gas turbine engines. Many technologies are used to improve their thermal efficiency. Thermochemical recuperation is investigated in this paper. Much previous research has been restricted to analyzing of the thermodynamic potential of the chemically recuperated gas turbine cycle. However, little work has discussed the operation issues of this cycle. The analysis of actual fuel gases for the steam reforming process taking into account the actual load of gas turbines, the impact of steam reforming on the Wobbe index, and the impact of a steam-fuel reforming process on the carbon dioxide emissions is the novelty of this study. The obtained simulation results showed that gas turbine engine efficiency improved by 8.1 to 9.35% at 100% load, and carbon dioxide emissions decreased by 10% compared to a conventional cycle. A decrease in load leads to a deterioration in the energy and environmental efficiency of chemically recuperated gas turbines.

The article is concerned with energy conservation in the process of cleaning grain. The study aimed to find ways of reducing energy consumption when cleaning food grains by using energy-saving operating modes (ESOM) on the production lines of grain storage facilities. For this purpose, experimental tests were performed which involved studying the effects of physical and chemical properties of grain as well as the influence of various operating modes of the production lines on the specific energy consumption (SEC), which was found to be the most informative indicator for determining ESOM. The mathematical description of the target function was carried out by conducting a multifactorial experiment with the application of the orthogonal central composite design (OCCD) of the second order. Calculations produced a number of mathematical models describing the dependence of the response function on the input parameters. The proposed approach made it possible to obtain the minimum SEC for cleaning food grains and to develop practical recommendations for ways to reduce energy consumption, which resulted in the development of scientifically based SEC standards for a grain cleaning machine.

Considering the insufficient usage of natural resources, ecological crisis, rising population and limitations of the traditional food system in the 21st century, it is extremely important to search for methods to achieve sustainable development. In this context, the search for alternative methods of farming and the transformation of typical food consumption is relevant; the organic market and its features are of particular interest. Based on the above, this article is dedicated to understanding what the development opportunities for the production and export of Ukrainian organic products within the global market are. To achieve this objective, it became necessary to study the specificities of the dynamic growth of the global organic food market, which includes identifying the dominant factors of its development, peculiarities of its regulation, evaluation of the current state, main trends and prospects. The study provides the characteristics of the top competitors in the global market, consumer segmentation and experience of the implementation of global and national organic sector development and support programs. As a result of the study, it was found that Ukraine has unrealized export potential that can be realized using a combination of practices used abroad (the active use of marketing tools, state support for the organic sector and increasing organic production by uniting producers into clusters and creating cooperatives).

In the surface mining of mineral deposits, land resources suitable for agricultural purposes are inappropriately spent in large volumes. When mining deep open pits, overburden rocks are mainly transported to the surface. The optimal solution for reducing the area of disturbed lands is the placement of overburden rocks in internal dumps in the open pit. This is especially suitable when mining a mineral deposit with several open pits where at least one of them is depleted. Therefore, it is important to assess the feasibility of building an internal dump, based on the stability parameters of its slopes and the safe distance for placing mining equipment within its boundaries, which was the focus of this research. Numerical modeling with Slide 5.0 software was used to determine the stability of the dump slope inside the open pit and the safe distance from the upper slope edge for placing mining equipment. This reflected the geomechanical situation occurring within the boundaries of the dump formed in the open-pit field with a high degree of reliability. It was determined that the maximum standard safety factor values of the open-pit slopes are within the limits when the overburden rocks border on the hard bedrock (Ks.s.f ≥ 1.2). Under the condition where the dump slope bordered on sedimentations represented by clays, loams, and sands with a strength of 2–3 on the Mohs scale, the safety factor decreased by 22%. It was determined that the minimum safe distance from the outer contour of the dragline base to the upper edge of a single-tier dump was 15.5 m with a safety factor of 1.21. The maximum safe distance values in the range of 73.5–93 m were concentrated within the boundaries of sections 5–9, with a safety factor from 1.18 to 1.28. When the dragline was located within the boundaries of section 7, the dump construction works should be conducted only if the dump exist for up to 3 years. Based on the identified parameters, on the example of using the ESH-11/70 walking dragline, a technological scheme of its operation was developed with the allocation of safe boundaries for its placement when forming an internal dump. The results obtained are useful for the development of projects for the reclamation of depleted open pits.

The conflict-related internal displacement in Ukraine since 2014, after the armed combats with Russian military forces backing the separatist administrations, as well as the occupation of Crimea by the Russian Federation have not been state-organized. They imply a range of personal choices depending on civil positions and destinations for resettlement; therefore, the affected persons get involved in the consequent practical discourses and decision-making processes. Based on the legislative acts and the international reports on internal displacement, the internal displacement due to the current hybrid war of the Russian Federation against Ukraine is compared with the first Russia-backed separatist conflicts after the collapse of the USSR—the wars in South Ossetia, in 1992, and in Abkhazia, in 2008. The internal displacement situations have been reviewed through their dynamic coordination patterns, with regard to non-equilibrium transitions, fluctuations, and adaptations triggered on the systemic, community, and personal levels, as well as to the expected durable solutions: integration, return, temporary resettlement. Therefore, we suggest, for further discussion, the patterns of bistability—for the internal displacement due to the Russo-Georgian wars of 1992 and 2008, characterized by an overfocus, in the practical discourses, on the return of the internally displaced persons (IDP), and metastability—for the conflict-related internal displacement in Ukraine, with both the return and local integration solutions creating the quasi-stable system.

Drilling volumes should be increased in order to increase hydrocarbon production, but this is impossible without the usage of high-quality drilling tools made of modern structural materials. The study has to analyze the design, technological and operational methods to increase the performance of drilling tools made of various materials and has highlighted prospects of technological method applications. The scientific novelty of the study consists in the development of a new analytical model of PDC drill bit–well interaction. The developed model takes into account the drill bit manufacturing errors in the form of bit body–nipple axes misalignment on the drill bit strength. This result makes it possible to determine the permissible manufacturing errors to provide safe operation of the drill bit. It is established that there is an additional transverse force that presses the drill bit to the well wall in the rock due to manufacturing errors. It is determined that the magnitude of this clamping force can be significant. The material effect has been analyzed on additional clamping force. It is established that geometric imperfection of the drill bit causes the minimal effect for the elastic system of the pipe string, which includes a calibrator and is composed of drill pipes based on composite carbon fiber material, and the maximal effect—for steel drill pipes. Polycrystalline diamond compact (PDC) drill bit and well wall contact interaction during operation in non-standard mode is considered. Non-standard stresses are determined, and the strength of the blades is estimated for different values of drilling bit manufacturing error.