• Energy Research

We investigate the photodegradation in inert atmosphere of (poly 3-hexylthiophene:[6,6]-phenyl-C61-butyric acid methyl ester) (P3HT:PCBM) heterojunction solar cells under continuous illumination using advanced electrical characterization and a device modeling tool. Our results indicate that different failure mechanisms contribute to the performance loss. The first 250 h of illumination induced p-type doping and recombination related to traps in the blend which mainly decreases the short-circuit current and the efficiency of the cells. Device modeling and simulation allowed us to prove that increased p-type doping of the blend provoke the loss in the short-circuit current and the quantum efficiency by simultaneous reduction of charge carrier mobility and the electric field together with a shrink of the space charge region. Transmission electron microscopy (TEM) measurements reveal a change in the blend morphology upon long illumination times manifested by phase segregation in the blend. The reduction in the open-circuit voltage is reported to be related to a slight reduction of the charge transfer energy (CT) upon 700 h of illumination aging. The final failure mechanism was a rapid drop in the fill factor which occurs upon 1000 h of illumination and manifested by the appearance of an S-shape J–V characteristic. This failure mechanism is linked to the reduction of charge extraction caused by a reduced surface recombination velocity at the contacts.

We report the controlled preparation of water processable nanoparticles (NPs) employing the push-pull polymer PCDTBT and the fullerene acceptor PC71BM in order to enable solar cell processing using eco-friendly solvent (i.e. water). The presented method provides the possibility to separate the formation of the active layer blend and the deposition of the active layer into two different processes. For the first time, the benefits of aqueous processability for the high-potential class of push-pull polymers, generally requiring high boiling solvents, are made accessible. With our method we demonstrate excellent control over the blend stoichiometry and efficient mixing. Furthermore, we provide visualization of the nanomorphology of the different NPs to obtain structural information down to ~2 nm resolution using advanced analytical electron microscopy. The imaging directly reveals very small compositional demixing in the PCDTBT:PC71BM blend NPs, in the size range of about <5 nm, indicating fine mixing at the molecular level. The suitability of the proposed methodology and materials towards the aspects of eco-friendly processing of organic solar cells is demonstrated through a processing of lab scale NPs solar cell prototypes reaching a power conversion efficiency of 1.9%.

Conjugated polymers and small molecules based on alternating electron-donating (D) and electron-accepting (A) building blocks have led to state-of-the-art organic solar cell materials governing efficiencies beyond 10%. Unfortunately, the connection of D and A building blocks via cross-coupling reactions does not always proceed as planned, which can result in the generation of side products containing D-D or A-A homocoupling motifs. Previous studies have reported a reduced performance in polymer and small molecule solar cells when such defect structures are present. A general consensus on the impact of homocouplings on device performance is, however, still lacking as is a profound understanding of the underlying causes of the device deterioration. For differentiating the combined effect of molecular weight and homocouplings in polymer solar cells, a systematic study on a small molecule system (DTS(FBBTh2)2) is presented. The impact of homocouplings on nanomorphology, thermal, and electro-optical properties is investigated. It is demonstrated that small quantities of homocouplings (<10%) already lead to suboptimal device performance, as this strongly impacts the molecular packing and electronic properties of the photoactive layer. These results highlight the importance of material purity and pinpoint homocoupling defects as one of the most probable reasons for batch-to-batch variations.

This paper reviews the available life cycle analysis (LCA) literature on organic photovoltaics (OPVs). This branch of OPV research has focused on the environmental impact of single-junction bulk heterojunction polymer solar cells using a P3HT/PC60BM active layer blend processed on semi-industrial pilot lines in ambient surroundings. The environmental impact was found to be strongly decreasing through continuous innovation of the manufacturing procedures. The current top performing cell regarding environmental performance has a cumulative energy demand of 37.58 MJp m−2 and an energy payback time in the order of months for cells having 2% efficiency, thereby rendering OPV cells one of the best performing PV technologies from an environmental point of view. Nevertheless, we find that LCA literature is lagging behind on the main body of OPV literature due to the lack of readily available input data. Still, LCA research has led us to believe that in the quest for higher efficiencies, environmental sustainability is being disregarded on the materials' side. Hence, we advise the scientific community to take the progress made on environmental sustainability aspects of OPV preparations into account not only because standard procedures put a bigger strain on the environment, but also because these methods may not be transferrable to an industrial process. Consequently, we recommend policy makers to subsidize research that bridges the gaps between fundamental materials research, stability, and scalability given that these constraints have to be fulfilled simultaneously if OPVs are ever to be successful on the market. Additionally, environmental sustainability will have to keep on being monitored to steer future developments in the right direction.

AbstractOrganic photovoltaics (OPV) have attracted great interest as a solar cell technology with appealing mechanical, aesthetical, and economies‐of‐scale features. To drive OPV toward economic viability, low‐cost, large‐scale module production has to be realized in combination with increased top‐quality material availability and minimal batch‐to‐batch variation. To this extent, continuous flow chemistry can serve as a powerful tool. In this contribution, a flow protocol is optimized for the high performance benzodithiophene–thienopyrroledione copolymer PBDTTPD and the material quality is probed through systematic solar‐cell evaluation. A stepwise approach is adopted to turn the batch process into a reproducible and scalable continuous flow procedure. Solar cell devices fabricated using the obtained polymer batches deliver an average power conversion efficiency of 7.2 %. Upon incorporation of an ionic polythiophene‐based cathodic interlayer, the photovoltaic performance could be enhanced to a maximum efficiency of 9.1 %.

Abstract P3HT:PCBM blends applied as active layers for bulk heterojunction organic solar cells generally show unstable morphologies upon prolonged thermal annealing, severely limiting the lifetime of the devices. As such, the thermodynamic instability of the blend is a limiting factor in the overall performance of organic photovoltaics, and a strong disadvantage in the fierce competition with other photovoltaic technologies. This paper shows whether different blend preparation conditions and intrinsic structural changes in the side chains of poly(3-alkylthiophene) (P3AT) derivatives can influence the thermal stability of the resulting solar cells. A combination of Bright Field Transmission Electron Microscopy (BFTEM) and the analysis of Selected Area Electron Diffraction (SAED) patterns revealed that the investigated preparation conditions do not really affect the thermal stability, whereas the introduction of a small ratio (10%) of specific functional moieties in the side chains of random P3AT copolymers does improve the thermal stability significantly. It was demonstrated that demixing of the blend components upon prolonged thermal annealing is strongly delayed in the functionalized P3AT:PCBM blends. The enhanced thermal stability was confirmed by in-situ monitoring of the short circuit current of organic solar cells based on the respective active layers. The introduction of functionalized side chains hence represents an attractive approach to increase the operational stability of organic photovoltaics based on the bulk heterojunction concept.

Gradually increasing dielectric constants (up to 6.3) are obtained for a series of PCPDTTPD polymers.

A series of three 5'-aryl-2,5-dithienylthiazolo[5,4-d]thiazole (DTTzTz) semiconducting molecules with different aryl substituents has been investigated as alternative acceptor materials in combination with the donor polymer poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylene vinylene] (MDMO-PPV) in order to evaluate the photoinduced charge transfer (CT) efficiency in the resulting blends, designed towards possible application in organic photovoltaics. Photoluminescence quenching together with polaron detection by electron paramagnetic resonance and photoinduced absorption (PIA) demonstrate an increasing charge transfer efficiency when the DTTzTz substituents are varied from thien-2-yl to 4-trifluoromethylphenyl and 4-cyanophenyl groups, correlating well with the increasing acceptor strength in this series of molecules. In line with this observation, there is a decrease in the effective optical bandgap relative to pure MDMO-PPV that becomes more pronounced along this series of acceptor compounds, reaching 0.12 eV in the blend with 4-CN-Ph-DTTzTz. Intermolecular interactions between the blend components lead to lower energy transitions which are found to contribute significantly to the device external quantum efficiency. The high V(OC) reached in devices based on MDMO-PPV:4-CN-Ph-DTTzTz blends meets the expectations for such a donor:acceptor combination. However, thermal activation of charge carrier recombination occurs because of the weak driving force for charge transfer, as shown by time-dependent PIA measurements, and this is suggested as a cause for the observed low photovoltaic performance.