• Energy Research

Nowadays, attention to the environment is increasingly emphasized by the scientific community. Different measures have been adopted to ensure a lower environmental impact and increase the sustainability of industrial processes. This work fits well with these principles, as it focuses on the determination of pollutants in waste lubricating oils derived from the industrial and automotive sectors to quantify their concentration for potential recovery and subsequent reuse. Modern waste oils, especially those derived from industrial processes, contain pollutants and metals (most importantly, silicon). It is of utmost importance to determine the silicon content in the collected waste oils to verify the possibility of recycling them since high concentrations can badly affect the industrial operations in which they can be involved. One of the most applied analytic methods for controlling the content of metals is the ASTM D5185-18, Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). However, this method was certified for 50 mg/kg of maximum silicon content. To extend this range, CONOU, because of its duty to monitor waste oil quality, organized an interlaboratory comparison to verify the applicability of ASTM D5185-18 and also to samples of used oils containing higher concentrations of silicon. This work describes the details of the employed methodology and the results of the interlaboratory comparison that showed the applicability of ASTM D5185-18 also to samples containing silicon concentrations higher than 1000 ppm.

Seawater represents a potential resource to ensure sustainable availability of water for population and irrigation purposes, especially in some areas of the world. Desalination processes allow the production of fresh water, but they generate also brine as waste product. Sustainable brine management should be identified to ensure proper disposal and potentially resource recovery. This experimental study showed that emerging technologies such as Microbial Desalination Cells (MDCs) may provide a valuable contribution to the sustainability of the seawater desalination sector. In this paper, we report results on lab-scale desalination brine treatments applying MDCs, which allow energy savings, resource recovery, environmental impact minimization, and reduction of the organic load in municipal wastewater. Our results showed that MDCs’ treatment allows the removal of approximately 33 g of salts (62% of the total)—including chlorides, bromides, and sulphates—from 20 mL of brine within 96 h. The MDCs, according to the source of energy and the presence of mature biofilm at the anode, spent 7.2 J, 7.9 J, and 9.6 J in the desalination process, with the higher amount of energy required by the abiotic system and the lesser by the MDCs fed with just wastewater. Our approach also showed environmental and energy reductions because of potential metal recovery instead of returning them into marine environment. We quantified the avoided life cycle of human and marine eco-toxicity impacts as well as the reduction of cumulative energy demand of recovered metals. The main benefit in terms of avoided toxicity would arise from the mercury and copper recovery, while potential economic advantages would derive from the recovered cobalt that represents a strategic resource for many products such as battery storage systems.

Biofuels are an important alternative, renewable source of energy in the face of the ongoing depletion of fossil fuels. Cheese whey is a dairy industry waste characterized by high lactose concentration, which represents a significant environmental problem. Bio-ethanol production by cheese whey could be an effective nonvegetable source for renewable energy production. Here, we report the isolation of a mixed microbial population, able to produce ethanol as main fermentation product from fermenting whey. The microbial consortium has been used to perform a batch fermentation of crude whey in both anoxic and hypoxic conditions. Maximum ethanol concentrations achieved in this study was obtained using the mixed culture in hypoxic conditions, grown at pH 4 and 30 °C, with ethanol production yield of 60 g/L. Our research has pointed out an alternative way to both dispose and valorize cheese whey, a dairy by-product that could cause water pollution and harm to the environment if not properly treated.

The present research represents an approach toward the recycling of extractive waste inspired by circular economy and sustainability that is developed in accordance with Goal 12 of the United Nations 2030 Agenda for Sustainable Development Goals. A new procedure for the recovery of REEs from fluorite–barite–galena ores with calcite gangue from the Silius mine (Sardinia, Italy) is presented. The considered samples are waste materials of Silius mineralization, collected in the old processing plant of Assemini (near Cagliari). In this orebody, REE minerals consist of prevailing synchysite (a REE-bearing fluorocarbonate) and subordinate xenotime-Y (a Y-bearing phosphate). REE fluorocarbonates are extracted using 50% K2CO3 as the leaching solution, at 100 °C. Using a solution (mL)/sample (g) ratio of 25, about 10% of the total REE content of the considered sample is extracted within 1 h. At the laboratory scale, such alkaline leaching of REE from the waste materials allows the recovery of the CO2 produced as K2CO3 from concentrated KOH, in accordance with a circular flow. Further work is ongoing to scale up the process into a pilot plant, to prove that the method developed within this research can be economically feasible, socially suitable, and environmentally respectful.