• Energy Research

It is necessary to ensure safety in terms of health and accidents through the real-time monitoring of the construction site environment and workers. This problem has become of great importance due to the economic and social implications. Therefore, a sensor-based approach has been found to be beneficial in Building Information Modeling (BIM). Wireless Sensor Network (WSN) technologies are well-suited for the deployment of monitoring systems. A suitable technical solution for node communication in a WSN is Long Range (LoRa) modulation technology. In this study, an autonomous LoRa-based system for the monitoring of a construction site in Lungro, Calabria, Italy, is presented. The spatial monitoring of working personnel is achieved by employing a tracker device with an Inertial Measurement Unit (IMU) and a Global Positioning System (GPS) device. Accesses of personnel and gear to the site are registered using Radio Frequency Identification (RFID) tags equipped with protective gear. Fixed-position solar-powered sensor nodes are also employed for structural monitoring, i.e., movement sensors are used to monitor the variation of scaffolding, building structures, and under-work housing inclinations. Long Range Wide Area Network (LoRaWAN) gateways interface with the nodes and the internet for data exchange, enabling an Internet of Things (IoT) paradigm for the monitoring solution. A comprehensive overview of the workers and structural nodes, along with the RFID access management system and LoRaWAN gateway features, is provided in this article. A description of the web interface is also reported.

Attaining a good level of internal comfort is possible by controlling various parameters. Among all, the thermo-hygrometric comfort and the indoor air quality are of fundamental importance. This research is developed with the aim of verifying the indoor air quality following the installation of a passive cooling device in a historic building located in the province of L’Aquila in the municipality of Poggio Picenze in climatic zone E. This research aims to verify the functioning of a ventilation duct installed between the hypogeal and the second level of the structure that was installed to obtain air recirculation by exploiting the inertial potential of the hypogeal room. The first phase of the research was aimed at thermo-hygrometric monitoring using sensors installed on-site and controlled remotely in order to verify the operation of the device. The second-phase object of this text was useful in investigating the acquired indoor air quality level.

Since ancient times water has been accompanying technological change in the energy sector. Used as a source of hydraulic energy, it currently generates one-fifth of the global electricity production. However, according to collective imagination, hydroelectric plants are constructions of high environmental, acoustic, and visual impact, which may harm the preservation of the territory. This paper intends to address the topic of mini-hydropower that, in addition to providing the production of renewable energy, ensures a limited environmental impact even in delicate contexts with high landscape values, by elaborating a research methodology that makes these interventions compatible with them. The process of “global compatibility” checks developed to assess the feasibility of the intervention will be explained in the paper. We intend to describe here the research process undertaken to make the planning of this type of system sustainable, in contexts that need to be rehabilitated in relation both to the accessibility of citizens and to the environmental enhancement. The intervention planned will be characterized by the combined use of other renewable energy sources, in addition to water. The proposed methodology has been tested on a case study in the village of Roccacasale, in the province of L’Aquila.

The built environment remains a strategic research and innovation domain in view of the goal of full decarbonization. The priority is the retrofitting of existing buildings as zero-emission to improve their energy efficiency with renewable energy technologies pulling the market with cost-effective strategies. From the first age of photovoltaics (PV) mainly integrated in solar roofs, we rapidly moved towards complete active building skins where all the architectural surfaces are photoactive (Building Integrated Photovoltaics - BIPV). This change of paradigm, where PV replaces a conventional building material, shifted the attention to relate construction choices with energy and cost effectiveness. However, systematic investigations which put into action a cross-disciplinary approach between construction, economic and energy related domains is still missing. This paper provides the detailed assessment of a real multifamily building, taking into account retrofit scenarios for making active the building skin, with the goal to identify the sensitive aspects of the energetic and economic effectiveness of BIPV design options. By assuming a real case study with monitored data, the analysis will consider a breakdown of the main individual parts composing the building envelope, by then combining alternative re-configurations in merged clusters with different energy and construction goals. Results will highlight the correlation between building skin construction strategies and the energy and cost parameters by identifying the cornerstones for enhancing efficiency. The outcomes, related to the total life cost, self-consumption/sufficiency, in combination with different building design options (façade, roof, balconies, surface orientations, etc.), provide a practical insight for researchers and professionals to identify renovation strategies by synergistically exploiting the solar active parts towards lower global costs and higher energy efficiency of the whole building system.

The re-use of historical buildings, in some cases those that have been abandoned for years, is currently generating a lot of interest, and brings into discussion topics such as land recycling and the use of new resources. Our project on the rehabilitation of the former San Salvatore hospital in L’Aquila is an example of this re-use, and illustrates how best-practice strategies can be implemented in the rehabilitation of an existing building. There were two themes of evaluation: firstly, the adaptive re-use of a historical building of great impact in a strategic position within the urban core; secondly, the implementation of sustainable strategies when upgrading both the building envelope and building systems.

The paper presents the operation mode of a ventilation chimney placed in a historical building through the use of Design Builder, a modeling and dynamical simulation software. The aim is to verify the improvement of the comfort level and energy efficiency of the simulated environments through the usage of the duct as a passive ventilation system. The method adopted to intervene in a complex system, such as that represented by historic buildings, is to enhance the preexisting architectural values through their conversion into devices able to improve the performance of the building in terms of CO2 and energy consumption reduction. The case study is Palazzo Bruni-Riga, a valuable building located in the historic center of L'Aquila. The building has a double ventilation duct, probably also used as a light-pipe, in correspondence of two windowless rooms of similar dimensions. The dynamical simulations presented concern the analysis of the passive ventilation duct and its effects on the thermo-hygrometric well-being of the modeled rooms. The goal of this paper and this research in general, is that the wise use of such devices installed in times when there were no air conditioning systems, allows you to better use the ventilation chimneys, and have the maximum thermal indoor comfort, with the minimum effort and use of mechanical systems. Through the simulations it was possible to verify that through the use of the ventilation chimney, it is possible to have the indoor comfort conditions, by checking the Fanger indices for the data obtained from the simulations carried out. (C) 2018 The Authors. Published by Elsevier Ltd.

<p>In the last decades, the topic of lighting of the historical minor centres is taking a prominent role in the cultural debate on the urban recovery interventions, because of the development of a greater awareness of the regenerative potential role that a careful planning system of urban lighting can take in this context.</p><p>The latter, which had a purely functional role in the past, has recently taken a figurative and emotional role, associated with the vision of the urban light scene during the night and its valorization.</p><p>The study of light, therefore, has inevitably turned into an instrument of knowledge and critical interpretation of the urban spaces, aimed both to functional recovery of the lighting network technology, and the regeneration of the urban image and its night scenes.</p><p>The needs that this sector should satisfy are multiple and, sometimes, conflicting: the need for road safety, the reduction of light pollution, the need for energy and cost savings.</p><p>The research aims to define an operative methodology to deal with the light planning in complex contexts as the minor historical centers, in which the concept of transformation of the urban scene clashes directly with the concept of preserving the identity features of the places and its constructive values and materials.</p><p>Among the goals, there is therefore the aim of highlighting the main gaps in the network, due both to plant engineering reasons and to the obsolescence of the existing lighting fixtures.</p><p>We operatively work in the urban voids system field, as spaces that characterize the urban scene. Through the knowledge of their dominant features it is possible to preserve their identity and, at the same time, enhance their singularity, with a suitable lighting project, which requires the study of materials, colors and consumption.</p><p>The purpose is to promote an urban development, able to produce positive economic, social and cultural effects, oriented to improve the quality of life, as well as to value the architectural and environmental heritage giving importance to energy and economic saving.</p>