• Energy Research
• 12. Responsible consumption close

Production and consumption of confectionery products have increased worldwide, thus, effective management of wastewater produced is now an important issue. The confectionery high-load sewage was explored for biogas production in an innovative-design anaerobic reactor with labyrinth flow. The experimental studies were focused on determining the best technological parameters of anaerobic digestion for the effective removal of pollutants and obtaining high CH4 production efficiency. It was found that organic loading rate (OLR) of 5.0–6.0 g COD/L·d contributed to the highest CH4 generation of 94.7 ± 6.1 to 97.1 ± 5.1 L CH4/d, which corresponded to a high COD removal of 75.4 ± 1.5 to 75.0 ± 0.6%. Under such conditions the FOS/TAC ratio was below 0.4, indicating reactor stability, and pH was on the level of 7.15 ± 0.04 at OLR 5.0 g COD/L·d and 7.04 ± 0.07 at OLR 6.0 g COD/L·d.

Ultrasonic disintegration is one of the most interesting technologies among all known and described technologies for sewage sludge pre-treatment before the process of methane fermentation. This study was aimed at determining the effects of an innovative ultrasonic string disintegrator used for sewage sludge pre-treatment on the effectiveness of methane fermentation process. In this experiment, we used a device for disintegration of organic substrates, including sewage sludge, with the use ultrasonic waves. Its technical solution is protected by a patent no. P. 391477 – Device for destruction of tissue and cell structures of organic substrate. The volume of biogas produced ranged from 0.194±0.089 dm3/g o.d.m. at loading of 5.0 g o.d.m./dm3 and power of 50 W to 0.315±0.087 dm3/g o.d.m. at loading of 4.0 g o.d.m./dm3 and ultrasounds power of 125 W. The study demonstrated a positive effect of sewage sludge sonication on the percentage content of methane in biogas. Sewage sludge exposure to 125 W ultrasounds increased methane content in biogas to 68.3±2.5 % at tank loading of 3.0 g o.d.m./dm3.

Recent years have brought significant evolution and changes in wastewater treatment systems. New solutions are sought to improve treatment efficiency, reduce investment/operational costs, and comply with the principles of circular economy and zero waste. Microbial granules can serve as an alternative to conventional technologies. Indeed, there has been fast-growing interest in methods harnessing aerobic (AGS) and anaerobic (AnGS) granular sludge as well as microbial-bacterial granules (MBGS), as evidenced by the number of studies on the subject and commercial installations developed. The present paper identifies the strengths and weaknesses of wastewater treatment systems based on granular sludge (GS) and their potential for energy production, with a particular focus on establishing the R&D activities required for further advance of these technologies. In particular, the impact of granules on bioenergy conversion, including bio-oil recovery efficiency and biomethane/biohydrogen yields, and bioelectrochemical systems must be assessed and optimized.

The technology of aerobic granular sludge (AGS) seems prospective in wastewater bio-treatment. The characteristics as well as compactness and structure of AGS have been proved to significantly affect the effectiveness of thus far deployed methods for sewage sludge processing, including anaerobic digestion (AD). Therefore, it is deemed necessary to extend knowledge on the possibilities of efficient AGS management and to seek viable technological solutions for methane fermentation of sludge of this type, including by means of using the pre-treatment step. Little is known about the pre-treatment method with solidified carbon dioxide (SCO2), which can be recovered in processes of biogas upgrading and enrichment, leading to biomethane production. This study aimed to determine the impact of AGS pre-treatment with SCO2 on the efficiency of its AD. An energy balance and a simplified economic analysis of the process were also carried out. It was found that an increasing dose of SCO2 applied in the pre-treatment increased the concentrations of COD, N-NH4+, and P-PO43− in the supernatant in the range of the SCO2/AGS volume ratios from 0.0 to 0.3. No statistically significant differences were noted above the latter value. The highest unit yields of biogas and methane production, reaching 476 ± 20 cm3/gVS and 341 ± 13 cm3/gVS, respectively, were obtained in the variant with the SCO2/AGS ratio of 0.3. This experimental variant also produced the highest positive net energy gain, reaching 1047.85 ± 20 kWh/ton total solids (TS). The use of the higher than 0.3 SCO2 doses was proved to significantly reduce the pH of AGS (below 6.5), thereby directly diminishing the percentage of methanogenic bacteria in the anaerobic bacterial community, which in turn contributed to a reduced CH4 fraction in the biogas.

The most common technology for the recovery of energy and valuable materials from sewage sludge is anaerobic digestion (AD). Ensuring thermophilic conditions during AD has been proven to cause process intensification and an improvement in its final outcomes. Nonetheless, the search is underway for other methods to bolster the effectiveness of the AD of aerobic granular sludge (AGS), which is characterized by a compact and complex structure. A prospective AGS pre-treatment technology entails the use of solidified carbon dioxide (SCO2). The present study focused on an evaluation of the AGS pre-treatment with SCO2 on the thermophilic AD technological effects. It evaluated the effect of the SCO2 pre-treatment method on changes in the concentrations of organic and biogenic compounds in the dissolved phase and the yield and kinetics of biogas and methane production in periodical reactors, as well as enabled the development of an empirical organizational model of biogas production. SCO2 introduced to AGS caused an increase in the content of COD, N-NH4+, and P-PO43− in the AGS dissolved phase at SCO2/AGS volumetric ratios ranging from 0 to 0.3. A further increase in the SCO2 dose did not cause any statistically significant differences in this respect. The highest biogas and methane yields were obtained at SCO2/AGS of 0.3 and reached 482 ± 21 cm3/gVS and 337 ± 14 cm3/gVS, respectively. The higher SCO2 doses used led to a significant decrease in the pH value of the AGS, which, in turn, contributed to a decreasing CH4 concentration in the biogas.

Abstract The presented technology is aimed on the one hand at purifying the effluents from fermented sludge to the quality enabling their discharge to a river, and on the other hand at ensuring the production of high concentrations of algae biomass. The produced algae biomass will be used as a substrate in the process of methane fermentation. The main factor which minimizes the possibility of introducing crude effluents into photobioreactors is a high content of organic compounds and the suspension. The removal of these contaminants from wastewater will proceed with both physical methods via floatation and biological methods with the use of a biofilm. It is expected that biogenes will be effectively removed from effluents through the growing biomass of microalgae.

The aim of this study was the performance evaluation of anaerobic digestion of dairy wastewater in a multi-section horizontal flow reactor (HFAR) equipped with microwave and ultrasonic generators to stimulate biochemical processes. The effects of increasing organic loading rate (OLR) ranging from 1.0 g chemical oxygen demand (COD)/L·d to 4.0 g COD/L·d on treatment performance, biogas production, and percentage of methane yield were determined. The highest organic compounds removals (about 85% as COD and total organic carbon—TOC) were obtained at OLR of 1.0–2.0 g COD/L·d. The highest biogas yield of 0.33 ± 0.03 L/g COD removed and methane content in biogas of 68.1 ± 5.8% were recorded at OLR of 1.0 g COD/L·d, while at OLR of 2.0 g COD/L·d it was 0.31 ± 0.02 L/COD removed and 66.3 ± 5.7%, respectively. Increasing of the OLR led to a reduction in biogas productivity as well as a decrease in methane content in biogas. The best technological effects were recorded in series with an operating mode of ultrasonic generators of 2 min work/28 min break. More intensive sonication reduced the efficiency of anaerobic digestion of dairy wastewater as well as biogas production. A low nutrient removal efficiency was observed in all tested series of the experiment, which ranged from 2.04 ± 0.38 to 4.59 ± 0.68% for phosphorus and from 9.67 ± 3.36 to 20.36 ± 0.32% for nitrogen. The effects obtained in the study (referring to the efficiency of wastewater treatment, biogas production, as well as to the results of economic analysis) proved that the HFAR can be competitive to existing industrial technologies for food wastewater treatment.

The increasing concentration of anthropogenic CO2 in the atmosphere is causing a global environmental crisis, forcing significant reductions in emissions. Among the existing CO2 capture technologies, microalgae-guided sequestration is seen as one of the more promising and sustainable solutions. The present review article compares CO2 emissions in the EU with other global economies, and outlines EU’s climate policy together with current and proposed EU climate regulations. Furthermore, it summarizes the current state of knowledge on controlled microalgal cultures, indicates the importance of CO2 phycoremediation methods, and assesses the importance of microalgae-based systems for long-term storage and utilization of CO2. It also outlines how far microalgae technologies within the EU have developed on the quantitative and technological levels, together with prospects for future development. The literature overview has shown that large-scale take-up of technological solutions for the production and use of microalgal biomass is hampered by economic, technological, and legal barriers. Unsuitable climate conditions are an additional impediment, forcing operators to implement technologies that maintain appropriate temperature and lighting conditions in photobioreactors, considerably driving up the associated investment and operational costs.