• Energy Research

Accurate characterization and reporting of organic photovoltaic (OPV) device performance reniains one of the important challenges in the field. The large spread among the efficiencies of devices with the same structure reported by different groups is significantly caused by different procedures and equipment used during testing. The presented article addresses this issue by offering a new method of device testing using "suitcase sample" approach combined with outdoor testing that limits the diversity of the equipment, and a strict measurement protocol. A round robin outdoor characterization of roll-to-roll coated OPV cells and modules conducted among 46 laboratories worldwide is presented, where the samples and the testing equipment were integrated in a compact suitcase that served both as a sample transportation tool and as a holder and test equipment during testing. In addition, an internet based coordination was used via plasticphotovoltaics.org that allowed fast and efficient communication among participants and provided a controlled reporting format for the results that eased the analysis of the data. The reported deviations among the laboratories were limited to 5% when compared to the Si reference device integrated in the suitcase and were up to 8% when calculated using the local irradiance data. Therefore, this method offers a fast, cheap and efficient tool for sample sharing and testing that allows conducting outdoor measurements of OPV devices in a reproducible manner. (C) 2014 Elsevier B.V. All rights reserved.

The correlation between surface profiles of nanostructures and the behavior of scattered light, including specular and diffuse components, is demonstrated in detail. The nanorod arrays with large alignment variation exhibit broadband and omnidirectional anti-reflection properties due to the gradual index profile. This work provides insight into further structural design for nanostructured optoelectronic applications.

Photoelectrochemical water splitting is one of the viable approaches to produce clean hydrogen energy from water. Herein, we report MoS2/Si-heterojunction (HJ) photocathode for PEC H2 production. The MoS2/Si-HJ photocathode exhibits exceptional PEC H2 production performance with a maximum photocurrent density of 36.33 mA/cm2, open circuit potential of 0.5 V vs. RHE and achieves improved long-term stability up to 10 h of reaction time. The photocurrent density achieved by MoS2/Si-HJ photocathode is significantly higher than most of the MoS2 coupled Si-based photocathodes reported elsewhere, indicating excellent PEC H2 production performance.

AbstractSolar‐driven carbon dioxide reduction reaction (CO2RR) provides an opportunity to produce value‐added chemical feedstocks and fuels. However, achieving efficient and stable photoelectrochemical (PEC) CO2RR into selective products is challenging owing to the difficulties associated with the optical and the electrical configuration of PEC devices and electrocatalyst properties. Herein, we construct an efficient, concentrated sunlight‐driven CO2RR setup consisting of InGaP/GaAs/Ge triple‐junction cell as a photoanode and oxide‐derived Au (Ox‐Au) as a cathode to perform the unassisted PEC CO2RR. Under one‐sun illumination, a maximum operating current density of 11.5 mA cm–2 with an impressive Faradaic efficiency (FE) of ~98% is achieved for carbon monoxide (CO) production, leading to a solar‐to‐fuel conversion efficiency of ~15%. Under concentrated intensity of 10 sun, the photoanode records a maximum current density of ~124 mA cm–2 and maintains ~60% of FE for CO production. The results demonstrate crucial advancements in using III–V based photoanodes for concentrated PEC CO2RR.

We demonstrated a promising route to enhance the performance of inverted organic photovoltaic (OPV) devices by the incorporation of CuGaSe2 (CGS) quantum dots (QDs) into the ZnO buffer layer of P3HT:PCBM-based devices. The modification of QDs provides better band alignment between the organic/cathode interface, improves ZnO crystal quality, and increases photon absorption, leading to more effective carrier transport/collection. By employing this energy-harvesting scheme, short-circuit current density, open-circuit voltage, and fill factor of the OPV device after CGS QD modification are improved by 9.43%, 7.02% and 6.31%, respectively, giving rise to a 23.8% enhancement in the power conversion efficiency.

We experimentally and theoretically demonstrated the hierarchical structure of SiO(2) nanorod arrays/p-GaN microdomes as a light harvesting scheme for InGaN-based multiple quantum well solar cells. The combination of nano- and micro-structures leads to increased internal multiple reflection and provides an intermediate refractive index between air and GaN. Cells with the hierarchical structure exhibit improved short-circuit current densities and fill factors, rendering a 1.47 fold efficiency enhancement as compared to planar cells.

The nanowire array (NWA) layers with controlled structure profiles fabricated by maskless galvanic wet etching on Si substrates are found to exhibit extremely low specular reflectance (<0.1%) in the wavelengths of 200–850 nm. The significantly suppressed reflection is accompanied with other favorable antireflection (AR) properties, including omnidirectionality and polarization-insensitivity. The NWA layers are also effective in suppressing the undesired diffuse reflection. These excellent AR performances benefit from the rough interfaces between air/NWA layers and NWA layers/substrate and the decreased nanowire densities, providing the gradient of effective refractive indices. The Raman intensities of Si NWAs were enhanced by up to 400 times as compared with the signal of the polished Si, confirming that the NWA layers enhance both insertion and extraction efficiencies of light. This study provides an insight into the interaction between light and nanostructures, and should contribute to the structural optimization of various optoelectronic devices.

Abstract SiO2 nanorod arrays (NRAs) are fabricated on InGaN-based multiple quantum well (MQW) solar cells using self-assembled Ag nanoparticles as the etching mask and subsequent reactive ion etching. The SiO2 NRAs effectively suppress the undesired surface reflections over the wavelengths from 330 to 570 nm, which is attributed to the light-trapping effect and the improved mismatch of refractive index at the air/MQW device interface. Under the air mass 1.5 global illumination, the conversion efficiency of the solar cell is enhanced by ∼21% largely due to increased short-circuit current from 0.71 to 0.76 mA/cm2. The enhanced device performances by the optical absorption improvement are supported by the simulation analysis as well.