• Energy Research

The aim of this article is to analyze the energy efficiency issues of eight office buildings built in Barcelona. Using computer simulations to compare energy demand and level of indoor natural lighting, it is demonstrated that there are considerable differences in demand – in some cases more than double – depending on the type of facade, and these differences are not directly related to the economic cost of the construction solutions used. In all cases, the cooling demand represents more than 80% of the total climate control demand, and solar radiation is the parameter with the greatest effect. The overall solar factor of the facade stands out as a key variable to control to both reduce the overall energy needs of a building and separate the cooling demand from the orientation of the building. The level of natural lighting is a differentiating element only in cases that had similar thermal energy performance. Peer Reviewed

In a world increasingly aware of the environmental cost of the current production/ consumption model, the use of sustainable practices to reduce our environmental impact as a society becomes imperative. One way to reduce this impact is to increase the reuse of materials that are considered, by current definitions of ”waste”, at their end of life. End-of-Life Household Materials (EoLHM) can be defined as household waste materials that still possess exploitable properties, thus making them suitable for reuse. There are several studies in the literature that address the recycling of these materials. When it comes to their reuse, unfortunately, only a limited number of studies are available. This paper aims to fill this gap by investigating the possibility to convert EoLHM, such as clothes or packaging, into low-cost thermal insulating materials for the improvement of the indoor thermal comfort in buildings, especially for households at risk of suffering from energy poverty. For this purpose, a comprehensive literature review and a qualitative analysis of both commercial and EoLHM are proposed. Commercial thermal insulating materials analysis is used as a reference to measure the performance of EoLHM. Important aspects to be considered when choosing suitable EoLHM for a smart conversion and reuse are also investigated. The most important outcome of this investigation is the comprehension that the conversion of EoLHM into insulating material is possible, and it implies a direct reduction in waste production, with environmental benefits and positive social implications. However, some aspects such as adaptability, life expectancy, collection and storage are, at present, in need of further thinking and development to make the EoLHM reuse and re-conversion processes viable on a large (neighborhood/city) scale.

A major concern for sustainable development is urban systems energy consumption. A possible way to gain additional whole system energy efficiencies is to integrate rooftop greenhouses (iRTG) on unoccupied roofs. This work presents actual environmental data (2015–2018) and calibrated energy modelling results to analyze the energy symbiosis between an iRTG and the host building. Simulation results illustrate that annually 98 kWh/m2 of heating energy is passively recovered (84% during night time) from the building by the iRTG. Conversely the iRTG insulating capacity resulted in annual energy saving of 35 kWh/m2 for the host building (equal to 4% of the building’s annual energy needs). When combined an overall 128 kWh/m2 of net energy savings and 45.6 kg CO2 eq/m2 of savings are realised via iRTG. On average, iRTG daytime temperatures can be 5.1 °C warmer (summer) and -4.3 °C cooler (winter) than the building. This presents major potentials for recovery and exchange of heating and cooling energy flows through integrating heating and ventilation air conditioning systems of the building and iRTG. Hence, iRTGs can provide a source of renewable energy as well as a sink for building exhaust air to improve energy efficiencies of urban built environment and urban agriculture. The authors are grateful to the Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya for the award of a research scholarship (FI-DGR 2018) to Joan Muñoz-Liesa; to the Universitat Autònoma de Barcelona for the award of a research scholarship (PIF-2017) to Martí Rufí-Salís; to the Spanish Ministry of Economy and Competitiveness (MINECO) for the financial support to the research project Fertilectiy II “Integrated rooftop greenhouses: energy, waste and CO2 symbiosis with the building. Towards foods security in a circular economy” (CTM2016-75772-C3-1-R; CTM2016-75772-C3-2-R). Authors also acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities, through the “María de Maeztu” program for Units of Excellence (MDM-2015-0552). This work was additionally enabled by the Càtedra JG Ingenieros – Universitat Politècnica de Catalunya and the UK Engineering and Physical Sciences Research Council grand EP/P001173/1. Authors also thank Oriol Baeza, Prof. Xavier Gabarrell, Prof. Joan Rieradevall and the ICTA-UAB staff for their very valuable supporting advise and help. Peer Reviewed

A sustainable and secure food supply within a low-carbon and resilient infrastructure is encapsulated in several of The United Nations’ 17 sustainable development goals. The integration of urban agriculture in buildings can offer improved efficiencies; in recognition of this, the first south European example of a fully integrated rooftop greenhouse (iRTG) was designed and incorporated into the ICTA-ICP building by the Autonomous University of Barcelona. This design seeks to interchange heat, CO2 and rainwater between the building and its rooftop greenhouse. Average air temperatures for 2015 in the iRTG were 16.5 °C (winter) and 25.79 °C (summer), making the iRTG an ideal growing environment. Using detailed thermophysical fabric properties, 2015 site-specific weather data, exact control strategies and dynamic soil temperatures, the iRTG was modelled in EnergyPlus to assess the performance of an equivalent ‘freestanding’ greenhouse. The validated result shows that the thermal interchange between the iRTG and the ICTA-ICP building has considerable moderating effects on the iRTG’s indoor climate; since average hourly temperatures in an equivalent freestanding greenhouse would have been 4.1 °C colder in winter and 4.4 °C warmer in summer under the 2015 climatic conditions. The simulation results demonstrate that the iRTG case study recycled 43.78 MWh of thermal energy (or 341.93 kWh/m2/yr) from the main building in 2015. Assuming 100% energy conversion efficiency, compared to freestanding greenhouses heated with oil, gas or biomass systems, the iRTG delivered an equivalent carbon savings of 113.8, 82.4 or 5.5 kg CO2(eq)/m2/yr, respectively, and economic savings of 19.63, 15.88 or 17.33 €/m2/yr, respectively. Under similar climatic conditions, this symbiosis between buildings and urban agriculture makes an iRTG an efficient resource-management model and supports the promotion of a new typology or concept of buildings with a nexus or symbiosis between energy efficiency and food production.

Rapid global urbanisation in 21st century results in cities consuming vast resources but also offering unique opportunities for more integrated and circular resource management. This work investigates potential benefits of urban agriculture and buildings integration through a demonstrator building (ICTA). Actual building and integrated Rooftop Greenhouse (iRTG) data demonstrate wide thermal profiles across ICTA six levels and the potential for heat exchange within the building. Calibrated model monthly results indicate reduced building heating needs resulting from iRTG inclusion. However, more modest GSHP electrical cooling reductions resulting from plant transpiration showed reversing potential which requires more in-depth analysis of underlying principles. The authors are grateful to the Secretaria d'Universitats i Recerca del Departament d'Economia i Coneixement de la Generalitat de Catalunya for the award of a research scholarship (FI-DGR 2016) to Joan Muñoz Liesa; the Spanish Ministry of Economy and Competitiveness (MINECO) for the financial support of the research project Fertilectiy II “Integrated rooftop greenhouses: energy, waste and CO2 symbiosis with the building. Towards foods security in a circular economy” (CTM2016-75772-C3-1-R; CTM2016-75772-C3-2-R) and the María de Maeztu program for Units of Excellence in R&D (MDM-2015-0552). Peer Reviewed

Abstract Double-glazed facades (DGF) are an attractive option in contemporary architecture and are increasingly used in commercial buildings. They offer some advantages compared with single facade systems but require careful design. The solar-collector-like construction leads to high temperatures in the facade cavities and the possibility of the building overheating. This is undesirable effect, especially in Mediterranean climates. A possible solution for reducing thermal overheating is to use the air channel between the two layers of glass to evacuate the solar radiation absorbed by the facade. A suitable simulation procedure for modeling these facades would be very useful for designing buildings of this type. The use of computational fluid dynamics (CFD) has been broadly extended in order to gain insight into this problem, but selecting suitable sub-models for the convection, radiation and turbulence effects remains a big challenge. In this work, several modeling tests were carried out on a well-documented experimental test case taken from the open literature in order to obtain a suitable model of the aforementioned thermo-fluid-dynamics effects. Fluid and solid phase temperatures for a DGF configuration were obtained for three different radiation models and five different turbulence models, compared with experimental results available in the literature, and validated according to numerical verification and validation methodologies. From the results obtained it can be concluded that the P-1 radiation model seems to better predict the temperature of the solid phases present in the double facade. The RNG k − ɛ turbulence model seems to perform better than the other turbulence models tested for predicting heat transfer when there are zones of low velocities within the facade configuration. Only this combination of sub-models achieved numerical validation at pre-defined levels for the tested case.

Energy performance certificate databases are a key tool for mapping national building stock and thus fostering greater overall energy efficiency. This paper presents an insight into the energy performance of residential and tertiary sector buildings in Spain, through an analysis of the first 129,635 energy performance certificates issued for existing buildings, collected by the Catalan Institute of Energy. Most of the residential buildings or building units that were studied were “E” class (53.6%). Single-family houses were found to use more energy on average (248.0 kWhp/m2) than individual dwellings (183.2 kWhp/m2). Tertiary sector buildings were found to have slightly better energy performance (26.4% of buildings were rated “D class”), with an average energy consumption of 317.8 kWhp/m2. Modern buildings consume less energy, as they must meet the higher energy performance requirements stated in thermal building regulations. Residential buildings or building units located in hotter climate zones consume slightly less energy than those located in colder zones, mainly because heating accounts for a high percentage of overall energy expenditure (70–75% in residential buildings). A significant proportion of the energy consumed in tertiary sector buildings is for lighting (37.2%). This research defines the current energy consumption baseline of existing buildings in Spain. The results can help to prioritize energy conservation efforts according to building type, construction period, climate zone and specific end-uses. They may also help public authorities to plan future energy policies, and construction practitioners to identify market segments and business strategies. Peer Reviewed