• Energy Research
• Closed Access close

A prototype air cycle cooling system, designed for forced cooling of HPOF pipe-type cable, was built under an EPRI contract. Its main components are a turbine and compressor operated on a single high speed shaft and a compact cable. oil to air heat exchanger. Air cooling is supplemented by a spray water system. Tests were conducted on the prototype unit at the EPRI Waltz Mill Cable Test Facility to evaluate its performance and operating characteristics. This paper briefly describes this equipment and presents the results of the test program.

Abstract The methodology, the site and the dataset as well as the emissions scenario considered in the weather file definition influence the numerical evaluation of efficiency measures resilience. With a complete statistical and critical approach, the paper analyzes the importance of these aspects by means of a residential case study simulated in Benevento, a city of south Italy. Using data monitored from 2015 to 2020, a current weather file is built with different methodologies. The comparison indicates that there is not repeatability of the year chosen as a reference for the various months and thus the resolution of the building energy balance could bring different results. Some future climate projections are also generated on medium (2050 s) and long (2080 s) term considering different emission scenarios. With long term projection, the heating degree days are reduced also of − 21% meanwhile the cooling degree days are more than double compared with the current condition. This suggests a remarked transition towards a dominant cooling climate for Benevento. Moreover, when the climate change is considered, the insulation intervention and the installation of double glazed low emissive window is not resilient because the heating energy need decreases also of −56%, but the cooling energy need increases of + 62% (2080 s). If the efficiency measures include also the cool roof and the external shadings, the cooling demand could be reduced until –33% in some scenarios (e.g. RCP 4.5-50th percentile) and increased (+31%) in some others (e.g. 2080 s).

Abstract Compared with other traditional energy sources, renewable energy, which results the less pollution and has numerous resources, is a significant factor in addressing the current issues of the serious environmental pollution and the resource depletion. Large-scale renewable energy integrated to the grid could bring change in both morphological structure and operation modes of energy transmission. Therefore, it is necessary to research the evolution mechanism of the future transmission network with a high proportion of the renewable energy. In this paper, an evolution framework of power system with high proportion of renewable energy is proposed. Firstly, a network equivalence and simplification based on power transfer distribution factors (PTDFs) is proposed, which can effectively simplify the decision-making process of evolution of large-scale power system. Then, an annual production simulation (8760 h) which takes into account renewable energy and load fluctuations is used to find out the bottleneck of the power grid. Based on the above methods, evolution strategy of power system with high proportion of renewable energy is studied for finding out optimal expansion strategy. A real power system of Zhejiang province is used as a test system. Test results demonstrate the feasibility of the proposed evolution framework.

The combustion of coal in Thermal Power Plants generates fine dust particles (coal fly ash, CFA), which are collected from the flue gas streams and deposited as solid wastes. One of the technologically reliable solutions for utilization of CFA is its alkaline conversion into zeolites. The present study focuses on the influence of calcium content in CFA on the chemical and phase composition, morphology and surface properties of coal fly ash zeolites. Comparative studies of the capacity of zeolites of Na-X and Na-Ca-X types from coal fly ash to capture carbon emissions under static and dynamic conditions have been performed. The present study answers a key question from a practical point of view, how does moisture in flue gases affect the adsorption of carbon dioxide on zeolites. The development of efficient adsorbents from CFA with varying composition will contribute to a number of environmental benefits and to the development of efficient CO2 capture technologies in the context of the circular economy.

The association between alcohol and blood glucose levels, and whether it is modified by other variables, was examined in a cross-sectional survey of 5518 staff aged 40-65 years at worksites in Auckland and Tokoroa, New Zealand. Diabetes was determined by oral glucose-tolerance tests using 1999 WHO criteria. Usual alcohol intake in the previous 3 months, measured by food frequency questionnaire, was related positively with fasting triglycerides and high-density-lipoprotein (HDL)-cholesterol, and unrelated with fasting glucose, but had an approximate U-shaped relationship with 2-h glucose, which varied from an adjusted mean (S.E.) of 5.62 (0.08) mmol/l in non-drinkers, down to 5.34 (0.08) mmol/l in light alcohol drinkers (alcohol or =20 g per day). Adjusting further for triglycerides increased the mean difference in 2-h glucose for all drinking categories compared with non-drinkers, particularly for heavy drinkers (> or =20 g per day), from -0.22 (S.E. = 0.10) to -0.37 (0.10) mmol/l. The confounding effect of triglycerides suggests alcohol may affect the diabetes risk by a mechanism related to the triglyceride metabolism, which in heavy drinkers may counteract the protective effect of improved insulin sensitivity, resulting in the U-shaped relationship between alcohol and diabetes described in previous studies.

Abstract Bio-based polyurethane (BPU) foams were successfully prepared using hydrothermally liquefied wheat straw (WS) to substitute a mass fraction of up to 50% of polyols. Response surface methodology (RSM) based on central composite design (CCD) was employed to optimize four process parameters: NCO/OH molar ratio, loading of crosslinking agent (glycerol), loading of catalyst (a mixture of triethylene diamine, stannous octoate, and triethanolamine), and loading of blowing agent (water) for the maximum compression strength of the rigid BPU foams. With the quadratic orthogonal regression model, verified by experimentation, the maximum compression strength of approximately 180 kPa was obtained at the following optimal conditions: NCO/OH molar ratio of 1.24:1, glycerol addition of 12.11%, catalyst loading of 0.76%, and blowing agent addition of 1.31% in relation to the total mass of polyols. The BPU foam prepared at the optimal conditions exhibits good thermal conductivity (0.045 Wm−1K−1) and thermal stability, comparable to those of a reference foam prepared with 100% PPG400.

Abstract Canada has numerous climatic and geographical regions and the Canadian housing stock (CHS) is diversified in terms of vintage, geometry, construction materials, envelope, occupancy, energy sources and heating, ventilation and air conditioning system and equipment. Therefore, strategies to achieve net zero energy (NZE) status with the current stock of houses need to be devised considering the unique characteristics of the housing stock, the economic conditions and energy mix available in each region. Identifying and assessing pathways for converting existing houses to NZE buildings at the housing stock level is a complex and multifaceted problem and requires extensive analysis on the impact of energy efficiency and renewable/alternative energy technology retrofits on the energy use and GHG emissions of households. A techno-economic analysis of retrofitting renewable/alternative energy technologies in the CHS to reduce energy consumption and GHG emissions was conducted to develop strategies to achieve or approach NZE status for Canadian houses. The results indicate that substantial energy savings and GHG emission reductions are techno-economically feasible for the CHS through careful selection of retrofit options. While achieving large scale conversion of existing houses to NZEB is not feasible, approaching NZE status is a realistic goal for a large percentage of Canadian houses.

Cold-start (subzero startup) capability of polymer electrolyte fuel cell (PEFC) is of great importance. In this paper, the effects of the micro-porous-layer (MPL), varying start-up temperatures, start-up current density variation on the cold-start operation are investigated. We found PEFC with anode micro-porous-layer (AMPL), compared with one with CMPL, has higher possibility of successful cold start. By analyzing the anode and cathode pressure revolution of PEFC, the effect of MPL on the super cooled water removal and ice formation at different temperatures (-7,-10,-15 and-20℃) are discussed . In addition, we investigate the ice distribution in MEA through the X-ray device, by comparing the initial image when fuel cells shut down (before the produce the water) and final image after failed cold-start. We also explore the negative voltage phenomenon in the initial process of cold-start operation.