• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• Embargo close
• 11. Sustainability close
• 2. Zero hunger close

Abstract For 118 million residential housing units in the U.S., there is currently a gap between the potential energy savings that can be achieved through the use of existing energy efficiency technologies, and the actual level of energy savings realized, particularly for the 37% of housing units that are considered residential rental properties. Additional quantifiable benefits are needed beyond energy savings to help further motivate residential property owners to invest in energy efficiency upgrades. This research focuses on assessing the adoption of energy efficient upgrades in U.S. residential housing and the impact on rental prices. Ten U.S. cities are chosen for analysis; these cities vary in size across multiple climate zones, and represent a diverse set of housing market conditions. Data was collected for over 159,000 rental property listings, their characteristics, and their energy efficiency measures listed in rental housing postings across each city. Following an extensive data quality control process, over thirty different types energy efficient features were identified. The level of adoption was determined for each city, ranging from 5.3% to 21.6%. Efficient lighting and appliances were among the most common, with many features doubling as energy efficient and other desirable aesthetic or comfort improvements. Then using propensity score matching and conditional mean comparison methods, the relative impact on rent charged in each city was calculated, which ranged from a 6% to 14.1% increase in rent for properties with energy efficient features, demonstrating a positive economic impact of these features, particularly for property owners. This was further subdivided into five types of energy efficiency upgrade and three housing types. Single family homes generally demanded higher premiums with energy efficient features, however there was not a consistent pattern across the types of efficient upgrades. The results of this work demonstrate that investment in energy efficient technologies has quantifiable benefits for rental property owners in the U.S. beyond just energy savings. This methodology and results can also be used in other cities and by property owners, utility companies, or others, ultimately encouraging further investment and positive economic impact in residential energy efficiency and in turn improving energy and resource conservation in the building sector.

Abstract This paper aims to investigate sustainable waste management solutions for the city of Rio de Janeiro in Brazil, based on a life cycle approach. The Life Cycle Assessment (LCA) was performed by using the LCA-IWM methodology. The model was adapted to the Brazilian solid waste context and to the local characteristics, including waste composition, electricity mix and regulations. The annual amount of waste generated was the functional unit adopted. Eight municipal solid waste management strategies were evaluated. Scenarios including mixed waste collection and source separated collection as well as materials recovery and energy from waste were investigated. Scenarios were ranked based on the LCA results. Sensitivity analysis was carried out by varying the electricity mix. The results indicate that the current situation of municipal solid waste (MSW) in Rio de Janeiro presents the worst performance in terms of aggregated environmental burdens, indicating the urgency for implement new strategies toward a more environmentally friendly and sustainable MSW management system. It is noted that the better LCA performances were obtained in scenarios with high separately collection rates. Among them, the scenario based on recyclables recovery and anaerobic digestion shows to be a promising strategy to improve environmental sustainability. Sensitivity analysis demonstrates that the ranking of scenarios was not affected by changes in the electricity mix. From the results, the investment in source separated waste collection and materials recovery is the most environmentally friendly MSW strategy for Rio de Janeiro. In addition, scenarios with an emphasis in materials recovery presented higher environmental benefits than the alternatives focused on energy generation.

Following the environmental crises of recent decades, a turning point in the awareness of the fragility of ecosystems has been marked, i.e., environmental awareness. This has contributed to the development of various environmental laws and regulations such as the “Waste Electrical and Electronic Equipment,” the “Restriction of Hazardous Substances,” and the “Registration, Evaluation, Authorization and Restriction of Chemicals” regulations and the “Energy Using Products” Directives. Our work contributes to the development of eco-friendly product manufacturing processes. In order to estimate and optimize the environmental impacts of a product, most of the methodologies, concepts, and tools that integrate computer-aided design (CAD) and life cycle assessment systems generally exploit the feature technology at the level of each feature independently of the others, i.e., “microplanning.” The feature interaction technology (FIT) is treated only in few studies, but it is pivotal in the eco-manufacturing process. In this paper, we propose a new manufacturing-scenarios-based methodology by using FIT and a Multi-criteria Decision Support Method (MCDSM), which helps manufacturers maintain their marketplaces by producing goods in an eco-friendly way. In fact, this methodology helps designers choose from the CAD design phase the most ecological manufacturing process from possible existent scenarios in real time.

In this study, a comprehensive exergy analysis was applied to a solar power system (SPS) located in the city of Van, Turkey. Van was always known as a sun city throughout history with the name of TUSBA. It has an average of 300 sunny days a year, an altitude of 1727 m, and an average daily temperature of 9.85°C. Considering how the need for sustainable and renewable energy sources - and knowledge over them - constantly increases, this SPS was built to reveal the true solar potential of the campus area of Yuzuncu Yil University of the city of Van, hopefully as a precursor for further large-scale SPS constructions in the region. A daily analysis considering energy production and global radiation was applied to the system in 2013 for 365 days. It was found that the yearly exergy efficiency of the system was 10% and total electrical energy production was 31,038.95 kWh, averaging 1763.5 kWh/kWp yearly.

Abstract This study develops a novel sustainability assessment methodology for energy systems using life-cycle emission factors and sustainability indicators. Here, the global warming and environmental impact dimensions of the sustainability assessment methodology are examined in detail. A comparative analysis shows that a wind-battery system produces fewer potential global warming, stratospheric ozone depletion, air pollution, and water pollution impacts compared to a gas-fired system. The wind-battery system generates 13% of the life-cycle GHG emissions and 22% of the life-cycle ozone-depleting substance emissions of a gas-fired power plant. Nitrous oxide contributes more than 90% of the stratospheric ozone depletion potential of gas-fired and wind-battery systems.

Abstract This study demonstrates the possibility to use energy-cost optimal building designs based on life cycle approach. There is a lack of studies that cover the comprehensive assessment of both embodied energy (EE) and operational energy (OE) in a single optimization problem. The primary goal of the current study is to compare the optimized results of using OE+EE together and OE only. The optimization is performed on a case study building (townhouse) in Finland with three structural alternatives (i.e., reinforced concrete (RC); cross-laminated timber (CLT) and Steel). Different options for insulation thickness of external wall, roof, floor and window types were considered as decision variables as the scope of the present study is on building envelope. The objectives of the optimization are to minimize life cycle energy (LCE) and life cycle costs (LCC). The LCE difference between the most and least energy efficient solution on the pareto front is greater in case of the OE optimization, compared to OE+EE optimization. For all studied structures, the EE of the optimal solutions from OE+EE optimization ranges 16%–23% of LCE. Many of the non-dominated optimal solutions obtained from the OE+EE optimization shows a higher U-value for the building envelope components compared to the optimal solutions from the OE optimization. A relationship between both OE and EE with the overall thermal resistance of the building envelope is discussed to obtain a deeper understanding of such differences in U-value for the optimal solutions obtained from the OE+EE and OE optimization.

The present study is motivated by the need to decouple economic growth from environmental degradation given the new wave of chase for higher economic growth trajectories comes with its environmental cost implications, especially among developing blocs like the Emerging 7 (E7) countries. There is a consistent trade-off between economic growth versus environmental quality. Government apparatus are perpetually on the chase for low-carbon emission policies via the pursuit for green economy. To this end, this present study extends the conventional environmental Kuznets curve (EKC) argument by incorporating the role of institution in emerging industrialized economies (E7) and using second-generation panel analysis methods like mean group (MG), augmented mean group (AMG), common correlated effects mean group (CCEMG), and the Dumitrescu and Hurlin causality test for more robust estimates and inferences. To this end, we explore the long-run and causality relationship between economic growth, quadratic form of economic growth, institutional quality, trade flow, investment in energy sector, and financial development in an EKC environment. Empirical analysis established a long-run equilibrium relationship among the outlined variables over the study period. The long-run regression shows the presence of EKC in the E7. Thus, suggesting the preference for GDP growth over environmental quality at the earlier stage of growth curve. Interestingly, investment in energy, trade flow dynamics across the blocs, and financial development dampens the detrimental effect of environmental pollution as we observed negative relationship with the ecological footprint. On the contrary, quality of institution is weak as institutional quality increase (worsen) the quality of environment in the E7 economies. From a policy perspective, this current study proposed the need for more stringent environmental treaties and regulations and promotion of green economy without compromising economic growth. In the conclusion part of the study, more details and specifics about the policy blueprint are presented.

Abstract A forecast of transport activity, energy consumption and carbon dioxide emissions from transportation, carried out under ‘business as usual’ economic assumptions, is presented for the 10 countries of Central and Eastern Europe that have acquired the status of ‘accession countries’ to the European Union. Energy demand is projected under considerations of the dynamic evolution of transport modes and their use, the evolution of automotive fuel prices, which are assumed to gradually converge with Western European price levels within the current decade, and assumptions on efficiency improvements in all transport modes according to current technological trends and European regulations. The results, showing transportation energy demand to double and CO2 emissions to be 70% higher in 2030 compared to 2000, are compared with other published forecasts and discussed with a view to potential future energy and environmental impacts in these countries, outlining major policy implications.

Abstract Social acceptance of innovative technologies is a key element of an effective transition towards more sustainable energy economies. However, innovative technologies like genetic modification also tend to spark controversy and backlash. So far, efforts to inform the public about any risks and benefits of novel technologies not only have struggled to foster acceptance but also neglect the interdependent foundations of consumer decision-making. Through a controlled experiment with German consumers (N = 322), we examine whether consumer support and rejection of genetic modification in bioenergy crops is influenced by the statements and actions of actors throughout the supply chain. In specific, we show that the decision of energy companies to sell and support GM bioenergy positively impacts consumer decisions to support. To ensure that decision outcomes were specifically impacted by the expressions of corporate actors, we controlled for the content and valence of information by random assignment to one of three treatments in which participants received positive, negative, or balanced (risks and benefits) information. We find that negative messaging diminished support and increased rejection relative to the other treatments. Lastly, the statements and actions of corporate actors also exerted an indirect influence on consumer decisions through their interactions with social trust and labels, e.g. greater support by farmers had a positive influence only for those who are more generally trustworthy. Given these results, we anticipate more attention to the importance of actors such as farmers and energy companies for the social acceptance of novel technologies in the energy sphere.