• Energy Research
• Restricted close
• 7. Clean energy close
• 11. Sustainability close
• 12. Responsible consumption close
• 6. Clean water close

The presented article will describe an 'effect-cause' model for the purpose of simulating the energy consumption of DC fed light rail vehicles. The model will assess the advantages of hybrid vehicles in terms of energy consumption, network power and voltage variations, line current and losses; and will help sizing and designing a supercapacitor based energy storage system (ESS) for both on-board, and stationary applications. The proposed modeling needs to allow the ESS sizing according to the objective that needs to be achieved, being braking energy recovery, voltage drop compensation and peak power shaving the most common goals of ESS use in hybrid vehicles. The needed power and energy levels will vary in function of the vehicle features and the driving cycle followed. This all can be determined by the quasi-static simulation tool to ease the design process. Another objective of the modeling tool is to evaluate the behaviour of the vehicle power flow controller, which manages the power from/to the ESS in function of the state of several variables.

AbstractClimate change effects along with anthropogenic activities present the main factors that threaten the existence of heritage sites across the north Nile Delta of Egypt close to the coastline of the Mediterranean Sea. Observing the changes in the landscape close to the archaeological sites is an important issue for decision‐makers in terms of reducing the negative impact of natural events and human activities. The coastal heritage sites are becoming strongly threatened by the rising sea level phenomena that will happen due to global warming. Focusing on the distribution of the archaeological sites, this study aims to detect the areas at risk of shoreline erosion or accretion in the northern shoreline of the Nile Delta. In this study, the changes in the northern shoreline of the Nile Delta were observed and calculated during the last hundred years based on the integration between the old topographic maps from surveys in 1900, 1925 and 1945, optical satellite images captured by Landsat in 1972, 1986 and 2000; Sentinel2 2021; and the Radar SRTM data. The results of this study showed that the changes were enormous with a great shoreline erosion process over the last 121 years recorded along the shoreline in the periods between 1900–1925, 1925–1945, 1945–1972, 1972–1986, 1986–2000 and 2000–2021. The areas eroded were about 5.3, 4.7, 5.6, 8.9, 2.5 and 5.4 km2, respectively. Such negative movements caused the loss of two heritage sites, and the expected changes will lead to the loss of additional heritage sites in the next 500 years. Furthermore, a model was suggested for protecting the coastal heritage sites threatened by the risk of submergence. This study can help the decision‐makers to detect the coastal archaeological sites at risk and create innovative solutions for protecting these irreplaceable heritage sites.

It is well known that the efficiency of PV modules decreases with increasing module temperatures. Many studies have paid attention to the development and validation of heuristic models to calculate the PV module temperature in higher latitudes, however only a few focus on the thermal behaviour of PV modules in tropical regions of the world, where constantly high temperatures prevail. Also, little is known about the effect of including wind speed in these thermal models. This study evaluates three of such models - one that excludes wind, and two others including the wind influence - using hourly data for two tropical locations. Results show that the average hourly wind speeds in Singapore and Jayapura (Indonesia) are low and therefore the influence of the wind on the PV module temperature is minor. The three evaluated models produce about the same results with RMSE between 1.5-3.8 °C during daytime, which corresponds to a deviation in power output in the range of 0.3-1.6 %, depending on the PV module technology.

High-power high-density lithium rechargeable batteries are necessary to meet the energy demand of electric vehicles and high-power stationary grids. Here, we present a straightforward method for obtaining carbon nanofibers (CNFs) as a polysulfide barrier in Li-S cells, resulting in a significant increase in cell performance. CNFs were coated both on the separator and on the cathode. The CNF-coated cathode showed a specific capacity of 1010 mA h g−1 after 250 cycles at 0.2 C, with a capacity fading of 0.021% per cycle. In addition, at 1 C, it delivered 946 mA h g−1, thus presenting a fast Li+ transport with a good capacity. This result turns CNFs-coated cathodes into a promising system for obtaining high-performance Li-S cells.

AbstractThe potential impacts of future climate scenarios on water balance and flow regime are presented and discussed for a temporary river system in southern Italy. Different climate projections for the future (2030–2059) and the recent conditions (1980–2009) were investigated. A hydrological model (Soil and Water Assessment Tool) was used to simulate water balance at the basin scale and streamflow in a number of river sections under various climate change scenarios, based on different combinations of global and regional models (global circulation models and regional climate models). The impact on water balance components was quantified at the basin and subbasin levels as deviation from the baseline (1980–2009), and the flow regime alteration under changing climate was estimated using a number of hydrological indicators. An increase in mean temperature for all months between 0.5–2.4 °C and a reduction in precipitation (by 4–7%) was predicted for the future. As a consequence, a decline of blue water (7–18%) and total water yield (11–28%) was estimated. Although the river type classification remains unvaried, the flow regime distinctly moves towards drier conditions and the divergence from the current status increases in future scenarios, especially for those reaches classified as I‐D (ie, intermittent‐dry) and E (ephemeral). Hydrological indicators showed a decrease in both high flow and low flow magnitudes for various time durations, an extension of the dry season and an exacerbation of extreme low flow conditions. A reduction of snowfall in the mountainous part of the basin and an increase in potential evapotranspiration was also estimated (4–4.4%). Finally, the paper analyses the implications of the climate change for river ecosystems and for River Basin Management Planning. The defined quantitative estimates of water balance alteration could support the identification of priorities that should be addressed in upcoming years to set water‐saving actions.

In this paper, we address the problem of determining the optimal day-ahead generation profile for a wind power producer by exploiting wind speed forecasts provided by a meteorological service. In the considered framework, the wind power producer is called to take part in the responsibility of system operation by providing day-ahead generation profiles and undergoing penalties in case of deviations from the schedule. Penalties are applied only if the delivered hourly energy deviates from the schedule more than a given relative tolerance. The optimal solution is obtained analytically by formulating and solving a stochastic optimization problem aiming at maximizing the expected profit. The proposed approach consists in exploiting wind speed forecasts to classify the next day into one of several predetermined classes, and then selecting the optimal solution derived for each class. The performance of the bidding strategy is demonstrated using real data from an Italian wind plant and weather forecasts provided by a commercial meteorological service.

This paper analyzes different policies that may promote the transition to sustainability, with a particular focus on the energy sector. We present a dynamic simulation model where three different strategies for sustainability are identified: reduction in GHG emissions, improvements in energy efficiency and the development of the renewable energy sector. Our aim is to evaluate the dynamics that those strategies may produce in the economy, looking at different performance indicators: rate of growth, unemployment, fiscal position, GHG emission, and transition to renewable energy sources.

We present a MEMS-based unimorph silicon/PZT thick film vibrational energy harvester with an integrated proof mass. We have developed a process that allows fabrication of high performance silicon based energy harvesters with a yield higher than 90%. The process comprises a KOH etch using a mechanical front side protection of an SOI wafer with screen printed PZT thick film. The fabricated harvester device produces 14.0 µW with an optimal resistive load of 100 kΩ from 1g (g=9.81 m s−2) input acceleration at its resonant frequency of 235 Hz.