• Energy Research
• Closed Access close
• Restricted close
• Embargo close
• 13. Climate action close
• 12. Responsible consumption close

AbstractThe presented synthesis of the title compounds (II), (IV), (VI) and (VIII) is extremely simple and highly efficient without the use of any chromatographic purification.

Abstract Hybrid energy storage is a multi-modal approach to store and supply different forms of energy (electricity, heat, cold) simultaneously. This is an important sector coupling approach and enables large scale flexibility for a deep decarbonization of energy systems. Two different proposed energy storages – power-to-heat-to-X energy storage (PHXES) and pumped thermal energy storage (PTES) – are investigated in detail in this work towards their potential towards a hybrid deployment. The techno-economic analysis includes thermodynamic flowsheet simulations and unified cost estimations based on the used equipment. It is shown that the main input data set (e.g. working fluid selection, turbomachinery efficiency, pinch temperatures) has a strong influence on storage roundtrip efficiency in the thermodynamic simulations, but also on storage costs. Cost decrease and performance increase can be conflicting development targets, and it is not clear if future energy systems rather require technologies with the highest storage efficiencies or if low cost is an important prerequisite. PHXES and three variants of PTES are implemented into a simplified energy system model of the city of Hamburg that comprises the electric load and heat demand of the district heating system. Two scenarios (fossil benchmark and 80% decarbonization) are used to select the technologies and their capacities that allow the most cost-effective energy supply solution by a linear-programming optimization procedure. Large scale renewable power generation and hybrid energy storage play the major roles in the decarbonization scenario. PHXES with a storage capacity of 69 GWh, hot water storage (3.6 GWh) and a battery system (430 MWh) are part of the cost-optimal solution. A cost sensitivity analysis shows that a total cost reduction of 60–80% is required for PTES to become competitive in this model scenario.

Abstract This paper studied the yield and release of ClO 2 from NaClO 2 under various conditions by ultraviolet–visible spectrophotometer (UV–Vis), the existing form of HA-Na under various conditions by Fourier transform infrared spectroscopy (FT-IR), and the reactivity of chlorite/humate (NaClO 2 /HA-Na) in removal of SO 2 , NO and Hg 0 under various conditions. The investigated factors included the temperature, the pH, the standing time, the coexistence gases and the anions. The results indicated that the yield and release of ClO 2 were significantly affected by the cooperative effects of pH/temperature and pH/standing time. ClO 2 was confirmed as an effective oxidant in the removal of NO and Hg 0 , and dominated the distribution of Hg 2+ in NaClO 2 and KCl. SO 2 and NO were characterized as the promoters for oxidizing Hg 0 and stabling Hg 2+ . The addition of Cl − decreased the removal efficiencies of SO 2 and NO, but slightly increased the Hg 0 removal efficiency. The best removal efficiencies of SO 2 , NO and Hg 0 were 100%, 95.3% and 100% respectively. Based on the characterization results by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and energy dispersive spectroscopy (EDS), the removal products were determined as NaCl, humic (HA), Na 2 SO 4 , NaNO 3 , HgSO 4 , Hg(NO 3 ) 2 and HgCl 2 . The reaction mechanism was proposed finally.

In July 2010, the LISS Immigrant panel was presented a questionnaire to measure the ecological footprint of the respondent. The questionnaire calculates the ecological footprint by taking account of the space, resources and energy people use in relation to the biocapacity of the earth.More information on this Ecological Footprint measure by Prof. W. Rees and Dr. M. Wackernagel can be found on the website: www.footprintnetwork.org.

Abstract A requirement for the development of a viable biomass conversion technology for clean energy production is the efficient cleaning of the gas fraction. The aim of this work was to use fly ash (AF) to develop cheap and efficient catalysts in removing tar. FA was separated in two fraction, oxide fly ash (OFA) and unburned carbon (UCFA) and both were used for catalysts preparing. The toluene was used as a tar model and a fixed-bed reactor for testing. The calcined oxide fly ash (COFA) showed a steady decrease in catalytic activity, the removal efficiency was reduced by 13.52% after 3 h. Reduced catalyst (RCOFA) and activated and reduced catalyst (AROFA) showed a higher activity than COFA catalyst and were able to maintain their performance. The RCOFA catalytic activity decreased suddenly when the steam was present, and tar removal efficiency descended to 57.32% after only 3 h and to 49.03% after 5hrs, respectively. Results showed that the catalysts obtaining by mixing RCOFA/AROFA with UCFA led to high effective toluene conversion in a reforming environment, over 90% and their catalytic activity remained constant after 12 h, because the unburned carbon presence kept the iron in its reduced form, much more catalytically active.

The crucial role evaluation can play in the co-development of project design and its implementation will be addressed through the analysis of a case study, the Green Communities (GC) project, funded by the Italian Ministry of Environment within the EU Interregional Operational Program (2007-2013) "Renewable Energy and Energy Efficiency". The project's broader goals included an attempt to trigger a change in Italian local development strategies, especially for mountain and inland areas, which would be tailored to the real needs of communities, and based on a sustainable exploitation and management of the territorial assets. The goal was not achieved, and this paper addresses the issues of how GC could have been more effective in fostering a vision of change, and which design adaptations and evaluation procedures would have allowed the project to better cope with the unexpected consequences and resistances it encountered. The conclusions drawn are that projects should be conceived, designed and carried out as dynamic systems, inclusive of a dynamic and engaged evaluation enabling the generation of feedbacks loops, iteratively interpreting the narratives and dynamics unfolding within the project, and actively monitoring the potential of various relationships among project participants for generating positive social change.

Bioplastics are alternatives of conventional petroleum-based plastics. Bioplastics are polymers processed from renewable sources and are biodegradable. This study aims at conducting an environmental impact assessment of the bioprocessing of agricultural wastes into bioplastics compared to petro-plastics using an LCA approach. Bioplastics were produced from potato peels in laboratory. In a biochemical reaction under heating, starch was extracted from peels and glycerin, vinegar and water were added with a range of different ratios, which resulted in producing different samples of bio-based plastics. Nevertheless, the environmental impact of the bioplastics production process was evaluated and compared to petro-plastics. A life cycle analysis of bioplastics produced in laboratory and petro-plastics was conducted. The results are presented in the form of global warming potential, and other environmental impacts including acidification potential, eutrophication potential, freshwater ecotoxicity potential, human toxicity potential, and ozone layer depletion of producing bioplastics are compared to petro-plastics. The results show that the greenhouse gases (GHG) emissions, through the different experiments to produce bioplastics, range between 0.354 and 0.623 kg CO2 eq. per kg bioplastic compared to 2.37 kg CO2 eq. per kg polypropylene as a petro-plastic. The results also showed that there are no significant potential effects for the bioplastics produced from potato peels on different environmental impacts in comparison with poly-β-hydroxybutyric acid and polypropylene. Thus, the bioplastics produced from agricultural wastes can be manufactured in industrial scale to reduce the dependence on petroleum-based plastics. This in turn will mitigate GHG emissions and reduce the negative environmental impacts on climate change.

Abstract This paper contributes to the understanding of the determinants of energy audits and to the role of energy audits in promoting energy-efficiency measures in SMEs. It benefits from the data collected within the European Investment Bank Surveys in 2017 and 2018, involving information about energy audits and energy-efficiency investments of some 12,500 signatures from EU28 Member States per year. Our analysis suggests that the decision of firms to conduct an energy audit is driven mainly by their characteristics, such as size, productivity, capital intensity, sector affiliation, and national policies regarding the transposition of relevant EU legislation and policy incentives. Furthermore, our findings indicate that energy audits besides being the first step in realizing energy-efficiency opportunities, most likely lead to the adoption of their recommendations. This is consistent with the view that energy audit is a useful tool in overcoming the information barriers and facilitating investments in energy-efficiency measures (EEMs). In fact, their information is more crucial for small firms and for investments in support processes such as lighting, wall insulation etc. than in production processes such as replacement of machinery and equipment. We also find that the likelihood of investments in EEMs, especially after an energy audit, is higher when combined with external financing and for innovative firms.

Abstract Commercial potential in developing countries has always received a great attention from international investors, but this is not the case in Waste-to-Energy sector. Waste-to-Energy is bound up with various uncertainties rooted in its long-term nature therefore incorporating risks regarding political matters in developing countries makes it more complex. The present study substantiates the incompatibility of classic valuation methods in risky projects. Consequently, to deal with the riskiness of Waste-to-Energy investment in less developed countries, the combination of binomial tree analysis and Decoupled NPV is proposed. The hybrid approach is deployed to value a Waste-to-Energy project in Iran, and all evidence attest to the robustness of the method. The contribution of this paper can open up new vistas for investing in Waste-to-Energy industry, thus abating the catastrophic effects of landfill gas emissions.