• Energy Research
• Open Access close
• Closed Access close
• Restricted close
• 11. Sustainability close
• ZENODO close

Recycled waste materials obtained from industrial and agricultural processes are becoming promising thermal and acoustic insulating solutions in building applications; their use can play an important role in the environmental impact reduction. The aim of the present paper is the evaluation of the thermal performance of recycled waste panels consisting of cork scraps, rice husk, coffee chaff, and end-life granulated tires, glued in different weight ratios and pressed. Six panels obtained from the mixing of these waste materials were fabricated and analyzed. In particular, the scope is the selection of the best compromise solutions from the thermal and environmental points of view. To this aim, thermal resistances were measured in laboratory and a Life Cycle Assessment (LCA) analysis was carried out for each panel; a cross-comparative examination was performed in order to optimize their properties and find the best panels solutions to be assembled in the future. Life Cycle Analysis was carried out in terms of primary Embodied Energy and Greenhouse Gas Emissions, considering a ‘‘cradle-to-gate” approach. The obtained thermal conductivities varied in the 0.055 to 0.135 W/mK range, in the same order of magnitude of many traditional systems. The best thermal results were obtained for the panels made of granulated cork, rice husk, and coffee chaff in this order. The rubber granulate showed higher values of the thermal conductivity (about 0.15 W/mK); a very interesting combined solution was the panel composed of cork (60%), rice husk (20%), and coffee chaff (20%), with a thermal conductivity of 0.08 W/mK and a Global Warming Potential of only 2.6 kg CO2eq/m2. Considering the Embodied Energy (CED), the best solution is a panel composed of 56% of cork and 44% of coffee chaff (minimum CED and thermal conductivity).

This Milestone, namely M3.3, is part of Task 3.3 “Downscaling of future climate projections at the case-study scale and their transfer to the Partners”. The aim of M3.3 is to outline the results of the climate change evaluation over the investigated pilot sites. For the future projections of the climate variables (precipitation and temperature), the data provided by EURO-CORDEX initiative under two emission scenarios (RCP4.5 and RCP8.5) are used. The main information on the pilot sites, available data, analyses and results are presented. The data are freely downloadable from the web repository https://doi.org/10.5281/zenodo.7247977. This project is part of the PRIMA Programme supported by the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement No 1923.

The presented Report forms Deliverable D6.2 resulted from the realization of Workpackage WP.6.3 titled “Overview of market drivers, fiscal measures and subsidies” in frame of the EU-Project “Geothermal communities – demonstrating the cascaded use of geothermal energy for district heating with small scale RES integration and retrofitting measures” (GEOCOM). The following seven countries were covered by WP6.3 works and this Deliverable D6.2: o Macedonia, o Hungary, o Italy, o Poland, o Romania, o Serbia, o Slovakia. The work was done with the contribution of all GEOCOM Project Partner teams and appointed experts, coordinated, interpreted and summarized by the Mineral and Energy Economy Research Institute of PAS team, WP6 leader. FP7

Abstract The objective of this study was to investigate the effects of particle size reduction and solubilization on biogas production from food waste (FW). To clarify the effects of volatile fatty acids (VFAs) in the digestion process, the relationship between particle size and VFA accumulation was investigated in detail. For this purpose, substrates of various particle sizes were prepared by bead milling to support hydrolysis. Batch anaerobic digestion experiments were carried out using these pretreated substrates at mesophilic temperature for a period of 16 days. The results of pretreatment showed that the mean particle size (MPS) of substrates ground with a bead mill decreased from 0.843 to 0.391 mm, and solubilization accounted for approximately 40% of the total chemical oxygen demand (total COD) for grinding pretreatment by bead milling. Anaerobic digestion batch experiments revealed that MPS reduced by bead milling at 1000 rpm improved methane yield by 28% compared with disposer treatment. Moreover, this may have increased microbial degradation during the VFA production process with increasing total number of revolutions (operation time × revolutions per minute). However, excessive reduction of the particle size of the substrate resulted in VFA accumulation, decreased methane production, and decreased solubilization in the anaerobic digestion process. These results suggest that optimized reduction of the particle size of the substrate in conjunction with optimized microbial growth could improve the methane yield in anaerobic digestion processes.

{"references": ["National Renewable Energy Laboratory 1617 Cole Boulevard, Golden\nColorado 80401-3305t. 303-275-3000 www.nrel.gov., \"Technical\nReport NREL/TP-6A0-44073 Supply Curves for Rooftop Solar PVGenerated\nElectricity for the United States\" by Paul Denholm and\nRobert Margolis, November 2008, www.nrel.gov.", "\"Performance of Solar Power Plants in India\", submitted to Central\nElectricity Regu-latory Commission New Delhi by Dr. BD Sharma,\nFebruary 2011, www.cercind.gov.in.", "The University of New South Wales, Sydney, Canberra, Australia,\nwww.pveducation.org/pvcdrom - an online calculator for estimating\nsolar panel effi-ciency, Christiana Honsberg and Stuart Bowden."]} The rising price of fossil fuels, government incentives and growing public aware-ness for the need to implement sustainable energy supplies has resulted in a large in-crease in solar panel installations across the country. For many sites the most eco-nomical solar panel installation uses existing, southerly facing rooftops. Adding solar panels to an existing roof typically means increased loads that must be borne by the building-s structural elements. The structural design professional is responsible for ensuring a new solar panel installation is properly supported by an existing structure and configured to maximize energy generation.

The EU has set clear targets regarding energy conservation of buildings and heavily supports activities towards achieving these targets on a European scale. The Green Deal, renovation wave, Energy Performance of Buildings Directive (EPBD) and Energy Efficiency Directive (EED) are some examples of EU's actions. For more than a decade, Energy Performance Certificates provide detailed data about the current energy needs of a building/building unit as well as information about the building construction and systems. A Building Renovation Passport (BRP) has, on a European level lately, been conceived as a tool that can stimulate cost-effective renovation in the form of a long-term basis, step-by-step deep renovation roadmap following defined quality criteria, and outline energy renovation measures that will improve the energy performance of the building. A Digital Building Logbook (DBL) is another tool that can serve as an archive where all building information can be stored and continuously updated. In this way, a full record of the building history will be electronically available with data regarding construction plans and permits, maintenance and system replacement activities, energy and heat consumption and production, etc. Building Renovation Passports and the Digital Building Logbook are tools that can help in achieving energy efficiency in existing buildings and contribute to reaching the EU renovation wave goals. The objective of this report is to investigate how the current EPC schemes best make the link towards the BRP and the DBL to further incentivise and stimulate cost-effective deep energy renovations of buildings across Europe. Three surveys were carried out to collect relevant information about the current status of the EPC data records and to identify stakeholders' potential needs, perceptions, thoughts and expectations, regarding a future connection between the EPC and the BRP or DBL. These surveys were prepared in two forms: using an excel file format circulated via email, and through an online questionnaire. Their completion was carried out by 16 countries. Regarding the EPCs, the state or regional energy agencies are the owner of the EPC data records and make full use of them. Their current main usage is for statistical reasons in the majority of the countries and their access is publicly available in half of the responding countries. Many common data is stored in the EPC database which can be linked with other tools (half of the EPC databases are already linked with another source). Regarding the BRP, a review of existing European schemes showed that successful BRPs have combined the renovation advice with financial support, legal requirements and/or communication campaigns. An important factor of the BRP is that it should be issued by a qualified expert and should provide customised measures for the specific building together with the investment costs per renovation measure(s). The DBL analysis showed that it should provide access to building information and contribute to better decision-making for future interventions as well as operation, use and maintenance records. The building owner/user is proposed to have full access to the logbook and provide/input about energy bills and building plans/construction materials info. An important aspect is that every time the building undergoes intervention works, the DBL should be updated accordingly. The most important barrier is the lack of motivation to update the DBL contents followed by the absence of synergies and consistency with other tools. Another interesting finding is that both BRP and DBL should be fed automatically by EPC data without any user interference. There is a clear possible interconnection between EPC data and BRP and DBL future contents. In addition, BRP can be an instrument to increase the renovation rates and DBLs are necessary for the management of buildings' information. The linkage of EPC data and BRP and DBL can be strengthened by introducing BRP and DBL as voluntary schemes under national incentives and should be fully implemented once they have demonstrated acceptance by the stakeholders.

Spain has a high level of energy consumption and CO2 emissions in detached houses, being the lack of an adequate insulation level and efficient energy systems the main causes. The Spanish Government has been performing modifications on its Building Technical Code (BTC) to address this issue, following European Directives. An assessment of the development of the Spanish BTC from its first 2006 version has been conducted in this work. A standard Spanish detached house was placed in the different Spanish climatic zones, designed with the minimum requirements of the 2006 and 2013 BTCs, and was then analyzed using the software Cerma. The results show that energy demand is reduced and the energy rating is improved with the stricter requirements introduced in the 2013 BTC. Although energy demand and CO2 emissions vary significantly among the 13 different climatic zones studied, the BTC modifications allow to reach a minimum energy rating independently of the climatic zone where the house is located. Opaque enclosures and internal loads were found to be the main contributors to building-related emissions. Additionally, possible actions to improve energy rating in detached houses are evaluated, finding that a moderate insulation thickness increase and the installation of heat pumps allow to reach the highest energy rating, being the improvement more apparent in northern and central regions. The results of this work may be extrapolated to other countries with similar climatic conditions to the studied zones, providing guidelines to fulfill energy saving regulations, evaluate emission sources and improve building energy efficiency.