• Energy Research
• Closed Access close
• 12. Responsible consumption close
• 2. Zero hunger close
• English close

The importance of emission control has increased sharply due to increased need of energy from combustion. However, biomass utilization in energy production is not free from problems because of physical and chemical characteristics which are substantially different from conventional energy sources. In this situation, the quantity and quality of emissions as well as used renewable source as wood or corn grain are often unknown. To assess this problem the paper addresses the objectives to quantify the amount of greenhouse gases during the combustion of corn as compared to the emissions in fossil combustion (natural gas, LPG and diesel boiler). The test was carried out in Friuli Venezia Giulia in 2006-2008 to determine the air pollution (CO, NO, NO2, NOx, SO2 and CO2) from fuel combustion in the family boilers with power between 20-30 kWt. The flue gas emission was measured with a professional semi-continuous multi-gas analyzer, (Vario plus industrial, MRU air Neckarsulm-Obereisesheim). Data showed a lower emission of fossil fuel compared to corn in family boilers in reference to pollutants in the flue gas (NOx, SO2 and CO). In particular way the biomass combustion make a higher concentration of carbon monoxide (for a incomplete combustion because there aren’t a good mixing between fuel and air) and nitrogen oxides (in relation at higher content of nitrogen in herbaceous biomass in comparison of another fuel). Proceedings of the 19th European Biomass Conference and Exhibition, 6-10 June 2011, Berlin, Germany, pp. 1296-1304

The importance of emission control has increased sharply due to increased need of energy from combustion. However, biomass utilization in energy production is not free from problems because of physical and chemical characteristics which are substantially different from conventional energy sources. In this situation, the quantity and quality of emissions as well as used renewable source as wood or corn grain are often unknown. To assess this problem the paper addresses the objectives to quantify the amount of greenhouse gases during the combustion of corn as compared to the emissions in fossil combustion (natural gas, LPG and diesel boiler). The test was carried out in Friuli Venezia Giulia in 2006-2008 to determine the air pollution (CO, NO, NO2, NOx, SO2 and CO2) from fuel combustion in the family boilers with power between 20-30 kWt. The flue gas emission was measured with a professional semi-continuous multi-gas analyzer, (Vario plus industrial, MRU air Neckarsulm-Obereisesheim). Data showed a lower emission of fossil fuel compared to corn in family boilers in reference to pollutants in the flue gas (NOx, SO2 and CO). In particular way the biomass combustion make a higher concentration of carbon monoxide (for a incomplete combustion because there aren’t a good mixing between fuel and air) and nitrogen oxides (in relation at higher content of nitrogen in herbaceous biomass in comparison of another fuel). Proceedings of the 19th European Biomass Conference and Exhibition, 6-10 June 2011, Berlin, Germany, pp. 1296-1304

The main challenge for concrete industry - and in general for construction materials - is to serve the two major needs of human society, the protection of the environment, on one hand, and the requirements of buildings and infrastructures by the world?s growing population, on the other. In the past concrete industry has satisfied these needs well. However, for a variety of reasons, the situation has changed dramatically in the last years. First of all, the concrete industry is the largest consumer of natural resources. Secondly, Portland cement, the binder of modern concrete mixtures, is not as environmentally friendly. The world's cement production, in fact, contributes to the earth's atmosphere about 7% of the total CO2 emissions, CO2 being one of the primary greenhouse gas (GHG) responsible for global warming and climate change. As a consequence, concrete industry in the future has to face two antithetically needs. In other words, how the concrete industry can feed the growing population needs being - at the same time - sustainable? The answer to this question is represented by the ?3R-Green Strategy? widely discussed in the first chapter of this PhD thesis: Reduction in consumption of gross energy for construction materials production, Reduction in polluting emissions and Reduction in consuming not renewable natural resources. In particular, this thesis is focused on the alternative binders to Portland cement such as alkali-activated slag cements and calcium sulphoaluminate cement-based binders in order to manufacture sustainable mixtures for special applications such as repair mortars, lightweight reinforced plasters and concretes for slabs on ground. The experimental results show the feasibility of manufacturing both EN 1504-3 R3 class mortars and Portland-free concretes for jointless slabs on ground with calcium sulphoaluminate cement, supplementary cementitious materials (fly ash, ground granulated blast furnace slag) and hydrated lime instead of Portland cement. Moreover, alkali-activated mortars and concretes seem to be a reasonable alternative to natural hydraulic lime-based and/or traditional Portland cement-based mixtures for rehabilitation or restoration of ancient masonry buildings and existing concretes structures. Finally, a new sustainability index was developed taking into account the environmental impact, the performances and the durability of mixtures. In particular, in the environmental impact section, the natural raw materials consumption, the greenhouse gas emissions and the energy consumption have been considered. Furthermore, depending on the applications and the environments, design parameters and properties related to durability have been assigned to each mixture. less

The main challenge for concrete industry - and in general for construction materials - is to serve the two major needs of human society, the protection of the environment, on one hand, and the requirements of buildings and infrastructures by the world?s growing population, on the other. In the past concrete industry has satisfied these needs well. However, for a variety of reasons, the situation has changed dramatically in the last years. First of all, the concrete industry is the largest consumer of natural resources. Secondly, Portland cement, the binder of modern concrete mixtures, is not as environmentally friendly. The world's cement production, in fact, contributes to the earth's atmosphere about 7% of the total CO2 emissions, CO2 being one of the primary greenhouse gas (GHG) responsible for global warming and climate change. As a consequence, concrete industry in the future has to face two antithetically needs. In other words, how the concrete industry can feed the growing population needs being - at the same time - sustainable? The answer to this question is represented by the ?3R-Green Strategy? widely discussed in the first chapter of this PhD thesis: Reduction in consumption of gross energy for construction materials production, Reduction in polluting emissions and Reduction in consuming not renewable natural resources. In particular, this thesis is focused on the alternative binders to Portland cement such as alkali-activated slag cements and calcium sulphoaluminate cement-based binders in order to manufacture sustainable mixtures for special applications such as repair mortars, lightweight reinforced plasters and concretes for slabs on ground. The experimental results show the feasibility of manufacturing both EN 1504-3 R3 class mortars and Portland-free concretes for jointless slabs on ground with calcium sulphoaluminate cement, supplementary cementitious materials (fly ash, ground granulated blast furnace slag) and hydrated lime instead of Portland cement. Moreover, alkali-activated mortars and concretes seem to be a reasonable alternative to natural hydraulic lime-based and/or traditional Portland cement-based mixtures for rehabilitation or restoration of ancient masonry buildings and existing concretes structures. Finally, a new sustainability index was developed taking into account the environmental impact, the performances and the durability of mixtures. In particular, in the environmental impact section, the natural raw materials consumption, the greenhouse gas emissions and the energy consumption have been considered. Furthermore, depending on the applications and the environments, design parameters and properties related to durability have been assigned to each mixture. less

An ecological- and biological-based urban planning model, which focuses on the health of the people living in the city, is aimed at improving and prospering the welfare level of the society. The best scenario for creating more sustainable living spaces is to direct people's behavior towards a more environmentally friendly system. For this purpose, the "sustainable green campus" model has been considered at Kirklareli University. Kirklareli University, which was established in 2010 in Kirklareli city. The Green Campus Model covers the renovation of the indoor and outdoor areas of Kirklareli University, Kayali Campus, and its human-oriented, ecological, and environmentally friendly development. The sustainable green campus model includes the evaluation of the spatial and social living areas of Kirklareli University within the framework of sustainability. With the green campus approach, it aims to be a sustainable, environmentally oriented campus where renewable energy sources are used, naturally energy consumption can be controlled, and recycling and treatment systems are used effectively. © Peter Lang AG 2020.

An ecological- and biological-based urban planning model, which focuses on the health of the people living in the city, is aimed at improving and prospering the welfare level of the society. The best scenario for creating more sustainable living spaces is to direct people's behavior towards a more environmentally friendly system. For this purpose, the "sustainable green campus" model has been considered at Kirklareli University. Kirklareli University, which was established in 2010 in Kirklareli city. The Green Campus Model covers the renovation of the indoor and outdoor areas of Kirklareli University, Kayali Campus, and its human-oriented, ecological, and environmentally friendly development. The sustainable green campus model includes the evaluation of the spatial and social living areas of Kirklareli University within the framework of sustainability. With the green campus approach, it aims to be a sustainable, environmentally oriented campus where renewable energy sources are used, naturally energy consumption can be controlled, and recycling and treatment systems are used effectively. © Peter Lang AG 2020.

The project between tthe Deutsche Biomasseforschungszentrum (DBFZ) and the Karlsruhe Institute of Technology (KIT) focuses on the pr rovision of alternative fuels by thermochemical conversion. Biogenic residues and wastes which are not used yet or which could be utilised more efficiently are studied. The selection of possible feedstock was supported by a techhnical potential analysis including the competition to th he food industry. The technical suitability of raw materials for the fast pyrolysis (FP) process was of special in nterest. As a possible feedstock following types of biomass were studied: corn stover, corn cobs, biogenic floating re efuse (river Rhine and Baltic Sea), scrap wood, bark, rape s straw, sunflower straw, draff, diverse residues of flour production and hay. A process development unit (PDU) with a biomass feeding rate of 10 kg/h and a twin screw m mixer reactor was used for all experiments. It was found that different types of biomass form different char, condensate e and gas yields due to varying ash levels and lignocellulosic composition. Elemental formulas for feedstock, char, organic condensate and gas were estimated independent on t the feedstock due to similar elemental compositions. Pyrolysis gas analysis during the experiments gave information on the mass yields. A CO/CO2-ratio of 1 (i.e. wood) corresponds to organic condensate yields of about 50 wt.-%%, whereas a ratio of 0.3-0.7 (straw) corresponds to 18-32 wt. .-% respectively. Proceedings of the 20th European Biomass Conference and Exhibition, 18-22 June 2012, Milan, Italy, pp. 973-977

The project between tthe Deutsche Biomasseforschungszentrum (DBFZ) and the Karlsruhe Institute of Technology (KIT) focuses on the pr rovision of alternative fuels by thermochemical conversion. Biogenic residues and wastes which are not used yet or which could be utilised more efficiently are studied. The selection of possible feedstock was supported by a techhnical potential analysis including the competition to th he food industry. The technical suitability of raw materials for the fast pyrolysis (FP) process was of special in nterest. As a possible feedstock following types of biomass were studied: corn stover, corn cobs, biogenic floating re efuse (river Rhine and Baltic Sea), scrap wood, bark, rape s straw, sunflower straw, draff, diverse residues of flour production and hay. A process development unit (PDU) with a biomass feeding rate of 10 kg/h and a twin screw m mixer reactor was used for all experiments. It was found that different types of biomass form different char, condensate e and gas yields due to varying ash levels and lignocellulosic composition. Elemental formulas for feedstock, char, organic condensate and gas were estimated independent on t the feedstock due to similar elemental compositions. Pyrolysis gas analysis during the experiments gave information on the mass yields. A CO/CO2-ratio of 1 (i.e. wood) corresponds to organic condensate yields of about 50 wt.-%%, whereas a ratio of 0.3-0.7 (straw) corresponds to 18-32 wt. .-% respectively. Proceedings of the 20th European Biomass Conference and Exhibition, 18-22 June 2012, Milan, Italy, pp. 973-977

The purpose of Karlsruhe’s bioliq®-project is the conversion of biomass into synthetic chemicals and fuels (also referred to as BtL, biomass to liquids). The lignocellulosic biomass is first liquefied by fast pyrolysis in distributed regional plants to produce an energy-dense intermediate composed of pyrolysis condensates and solid char powder. Both products are mixed to a suspension (the so called bio-slurry or Syncrude) to be suitable for long storage periods and economic transport over long distances. Afterwards, in a large scale industrial facility, the biosyncrude is converted into syngas through entrained flow gasifier and then by catalysis to synfuels or platform chemicals. Regarding to a minimum of energy consumption for avoiding solid sediments in the biosyncrude, two possibilities are being taken into account: either the bio-slurry is continuously slowly stirred, or sedimentation is prevented by short-time stirring followed by an as-long-as-possible resting interval. For the investigated bio-slurries, the experimental results indicates, that it’s more efficient to stir the slurry batch-wise. Proceedings of the 22nd European Biomass Conference and Exhibition, 23-26 June 2014, Hamburg, Germany, pp. 1151-1154