• Energy Research
• Open Access close
• Closed Access close
• Restricted close
• Open Source close
• 6. Clean water close
• 1. No poverty close

A prototype air cycle cooling system, designed for forced cooling of HPOF pipe-type cable, was built under an EPRI contract. Its main components are a turbine and compressor operated on a single high speed shaft and a compact cable. oil to air heat exchanger. Air cooling is supplemented by a spray water system. Tests were conducted on the prototype unit at the EPRI Waltz Mill Cable Test Facility to evaluate its performance and operating characteristics. This paper briefly describes this equipment and presents the results of the test program.

Addressing the environmental risks related to contamination of groundwater with the phenolics, benzene, toluene, ethyl benzene, xylene (BTEX) and polycyclic aromatic hydrocarbons (PAHs), which might be potentially released from the underground coal gasification (UCG) under adverse hydrogeological and/or operational conditions, is crucial in terms of wider implementation of the process. The aim of this study was to determine the main organic pollutants present in the process condensate generated during the UCG trial performed on hard coal seam in the Experimental Mine ‘Barbara’, Poland; 8,933 L of condensate was produced in 813 h of experiment duration (including 456 h of the post-process stage) with average phenolics, BTEX and PAH concentrations of 576,000, 42.3 and 1,400.5 μg/L, respectively. The Hierarchical Clustering Analysis was used to explore the differences and similarities between the samples. The sample collected during the first 48 h of the process duration was characterized by the lowest phenanthrene, anthracene, fluoranthene and pyrene contents, high xylene content and the highest concentrations of phenolics, benzene, toluene and ethyl benzene. The samples collected during the stable operation of the UCG process were characterized by higher concentrations of naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo(a)anthracene, chrysene, while in the samples acquired in the post-process stage the lowest concentrations of benzene, toluene, naphthalene, acenaphthene and fluorene were observed.

AbstractInfluence of adding CuO nanoparticles in the base fluid on flow and heat transfer in an inclined half-annulus was studied considering constant heat flux as boundary condition of hot wall. Control Volume based Finite Element Method (CVFEM) is applied in order to simulate procedure. Pressure gradient source terms are eliminated by using vorticity stream function formulation. Influences of CuO volume fraction, inclination angle and Rayleigh number on hydrothermal manners are presented. Results indicate that inclination angle makes changes in flow style. The strength of eddies reaches to its minimum value when the upper wall is hot. Temperature gradient enhances with rise of buoyancy forces while it reduces with augment of inclination angle.

Climate change is a global problem, which affects the various geographical regions at different levels. It is also associated with a wide range of human health problems, which pose a burden to health systems, especially in regions such as Africa. Indeed, across the African continent public health systems are under severe pressure, partly due to their fragile socioeconomic conditions. This paper reports on a cross-sectional study in six African countries (Ghana, Nigeria, South Africa, Namibia, Ethiopia, and Kenya) aimed at assessing their vulnerabilities to climate change, focusing on its impacts on human health. The study evaluated the levels of information, knowledge, and perceptions of public health professionals. It also examined the health systems’ preparedness to cope with these health hazards, the available resources, and those needed to build resilience to the country’s vulnerable population, as perceived by health professionals. The results revealed that 63.1% of the total respondents reported that climate change had been extensively experienced in the past years, while 32% claimed that the sampled countries had experienced them to some extent. Nigerian respondents recorded the highest levels (67.7%), followed by Kenya with 66.6%. South Africa had the lowest level of impact as perceived by the respondents (50.0%) when compared with the other sampled countries. All respondents from Ghana and Namibia reported that health problems caused by climate change are common in the two countries. As perceived by the health professionals, the inadequate resources reiterate the need for infrastructural resources, medical equipment, emergency response resources, and technical support. The study’s recommendations include the need to improve current policies at all levels (i.e., national, regional, and local) on climate change and public health and to strengthen health professionals’ skills. Improving the basic knowledge of health institutions to better respond to a changing climate is also recommended. The study provides valuable insights which may be helpful to other nations in Sub-Saharan Africa.

Abstract. The impact of multiphase reactions involving nitrogen dioxide (NO2) and aromatic compounds was simulated in this study. A mechanism (CAPRAM 2.4, MODAC Mechanism) was applied for the aqueous phase reactions, whereas RACM was applied for the gas phase chemistry. Liquid droplets were considered as monodispersed with a mean radius of 0.1 µm and a liquid content (LC) of 50 µg m-3. The multiphase mechanism has been further extended to the chemistry of aromatics, i.e. reactions involving benzene, toluene, xylene, phenol and cresol have been added. In addition, reaction of NO2 with dissociated hydroxyl substituted aromatic compounds has also been implemented. These reactions proceed through charge exchange leading to nitrite ions and therefore to nitrous acid formation. The strength of this source was explored under urban polluted conditions. It was shown that it may increase gas phase HONO levels under some conditions and that the extent of this effect is strongly pH dependent. Especially under moderate acidic conditions (i.e. pH above 4) this source may represent more than 75% of the total HONO/NO2 - production rate, but this contribution drops down close to zero in acidic droplets (as those often encountered in urban environments).

Microbial fuel cell (MFC) is a sustainable and energy efficient technology, which uses graphite as cathode for hydrogen peroxide (H2O2) production often with simultaneous power production. Nevertheless, slow kinetics of oxygen reduction reaction (ORR) at the surface of graphite often results in poor performance of MFC. In an attempt to improve the performance of MFC for in‐situ H2O2 production, a treatment of graphite cathode using nitric acid was performed. The treatment was conducted in three steps (i) heat treatment at 450°C for 2 h; (ii) acid treatment with concentrated nitric acid for 5 h; and (iii) drying at 120°C for 2 h. After the treatment, four times increase in surface area of treated cathode (GR‐HA) was observed. Energy‐dispersive X‐ray spectroscopy (EDX) and Fourier transform infrared (FTIR) analysis revealed the presence of nitrogen and quinone based functional groups on the surface of GR‐HA. Cyclic voltammetric (CV) analysis of GR‐HA cathode further confirmed the production of H2O2 at the peak current value of −3.7 mA and on‐set potential of −0.1 V. Following CV analysis, H2O2 production experiments were performed in a dual chamber MFC using GR‐HA as cathode. Maximum 150 mg/L of H2O2 was produced with simultaneous power production of 36.438 mW/m2. Approximately, 25% increase in both H2O2 and power production was observed in the case of G cathode. Subsequently, Fenton oxidation experiments were performed (with GR‐HA and GR‐CA cathodes) to determine the efficacy of in‐situ produced H2O2. This resulted in an increase of 8.28%, 11.04%, and 31.32% in decolorization, chemical oxygen demand (COD), and Total Organic Carbon (TOC) removal efficiency, respectively. © 2016 American Institute of Chemical Engineers Environ Prog, 36: 382–393, 2017

AbstractThe concept of a ‘just transition’ to a low‐carbon economy is firmly embedded in mainstream global discourses about mitigating climate change. Drawing on Karl Polanyi's political economy elaborated inThe Great Transformation, we interrogate the idea of a just transition and place it within its historical context. We address a major contradiction at the core of global energy transition debates: the rapid shift to low‐carbon energy‐systems will require increased extraction of minerals and metals. In doing so, we argue that extractive industries are energy and carbon‐intensive, and will enlarge and intensify social and ecological injustice. Our findings reveal the importance of understanding how the idea of a just transition is used, and by who, and the type of justice that underpins this concept. We demonstrate the need to ground just transition policies and programmes in a notion of justice as fairness.