• Energy Research
• Closed Access close
• Open Source close
• Embargo close
• 12. Responsible consumption close
• Renewable Energy close

This paper presents a multi-objective optimization model for a long-term generation mix in Indonesia. The objective of this work is to assess the economic, environment, and adequacy of local energy sources. The model includes two competing objective functions to seek the lowest cost of generation and the lowest CO2 emissions while considering technology diffusion. The scenarios include the use of fossil reserves with or without the constraints of the reserve to production ratio and exports. The results indicate that Indonesia should develop all renewable energy and requires imported coal and natural gas. If all fossil resources were upgraded to reserves, electricity demand in 2050 could be met by domestic energy sources. The maximum share of renewable energy that can be achieved in 2050 is 33% with and 80% without technology diffusion. The least cost optimization produces lower generation costs than the least CO2 emissions, as well as the combined scenario. Total CO2 emissions in 2050 are five to six times as large as current emissions. The least CO2 emissions scenario can reduce almost half of the CO2 emissions of the least cost scenario by 2050. The proposed multi-objective optimization model leads some optimal solutions for a more sustainable electricity system.

Abstract Bamboo has been considered a potential feedstock of energy for the future. It can be subjected to the pyrolysis for biofuels production. The thermogravimetric analysis (TGA) combined with differential thermogravimetric analysis (DTG) for bamboo was carried out prior to pyrolysis. The thermal degradation of bamboo was mainly between 230 and 420 °C. The conventional pyrolysis of bamboo was investigated in a bubbling fluidized-bed reactor using silica sand. The product distribution and composition of pyrolysis bio-oil were dependent on biomass component and operating conditions such as pyrolysis temperature, fluidization velocity, and particle size of biomass. The fractional catalytic pyrolysis of bamboo was also studied to upgrade the pyrolysis vapor, using HZSM-5 and red mud. The highest yield of bio-oil was 54.03 wt% compared to 49.14 wt% and 50.34 wt% of HZSM-5 and red mud catalyst, respectively. In the red mud catalytic pyrolysis, the oxygen content was rejected from pyrolysis vapor mostly via decarboxylation to produce more CO2 than CO; in contrast, for the HZSM-5 catalytic pyrolysis, the production of CO through decarbonylation was more favored than CO2. The main composition of catalytic pyrolysis bio-oil was 4-vinylphenol, which was employed as a raw material source to synthesize valuable material for energy storage.

Abstract Sugarcane is a major crop cultivated globally and the residue left over after the crop harvest and extraction of juice is a good biomass source that can be used for the production of several useful chemicals. The sugarcane bagasse is an excellent substrate for the production of various biochemicals and enzymes through fermentation. Now major interest is focused on the utilization of these residue for biofuel production. The sugarcane crop residue is rich in cellulose and hemicellulose, hence it can be used for the production of bioethanol and other liquid transportation fuels. The present review gives a detailed account of the availability of sugarcane residue and various commercially important products that can be produced from this residue. It also provides recent developments in R&D on the bioconversion of sugarcane crop residue for value added products.

Abstract To address the problem of fossil fuel usage at the Missouri University of Science and Technology campus, using of alternative fuels and renewable energy sources can lower energy consumption and hydrogen use. Biogas, produced by anaerobic digestion of wastewater, organic waste, agricultural waste, industrial waste, and animal by-products is a potential source of renewable energy. In this work, we have discussed Hydrogen production and End-Uses from CHHP system for the campus using local resources. Following the resource assessment study, the team selects FuelCell Energy DFC1500™ unit as a molten carbonate fuel cell to study of combined heat, hydrogen and power (CHHP) system based on a molten carbonate fuel cell fed by biogas produced by anaerobic digestion. The CHHP system provides approximately 650 kg/day. The total hydrogen usage 123 kg/day on the university campus including personal transportation applications, backup power applications, portable power applications, and other mobility applications are 56, 16, 29, 17, and 5 respectively. The excess hydrogen could be sold to a gas retailer. In conclusion, the CHHP system will be able to reduce fossil fuel usage, greenhouse gas emissions and hydrogen generated is used to power different applications on the university campus.

Abstract Sweet sorghum, a C4 plant, is known to be a unique, versatile, and potential energy crop that can be separated into starchy grains, soluble sugar juice, and lignocellulosic biomass. The fermentable sugars in the juice (53–85% sucrose, 9–33% glucose, and 6–21% fructose) can be directly fermented into ethanol. The grain is primarily starch (62–75%), which can be hydrolyzed and fermented into ethanol. The bagasse, a fibrous lignocellulosic material, can be used to produce cellulosic ethanol, heat and/or power co-generation. In this review, the potential of sweet sorghum for bioenergy production (of various forms) using recently developed cultivars with improved agronomic performance was discussed. In addition, sweet sorghum was compared with other starch, sugar, and lignocellulosic feedstocks. Studies have been conducted on alternative pathways to convert whole sweet sorghum stalks and bagasse into bioenergy. However, very little review of the techno-economic analysis of bioenergy production and co-products from sweet sorghum has been published. The aim of this research was to review the current knowledge of agronomic requirement for cultivating sweet sorghum, the productivity of recently developed cultivars for bioenergy production, and pathways of converting sweet sorghum crop into bioenergy as well as the techno-economic feasibility of using sweet sorghum for bioenergy.

Abstract The increased environmental awareness coupled with the recent changes in the oil prices triggered the necessity of focusing on effective management of energy systems. Global climate change has caused many people to consider ways of reducing greenhouse gases Renewable energy has become an essential feature in curtailing emission of Green House Gases, while meeting the demand for energy. This paper presents an innovation system framework for development and diffusion of renewable energy technologies. The framework is used to identify opportunities for small and medium enterprises in the renewable energy sector. A case study on a successful development, installation and implementation of solar thermal systems households in Calgary, Alberta, by an entrepreneurial firm, is also presented.

Abstract Solar energy, as main energy supply that sustains life on Earth, is also an unavoidable component of the complex strategy in achieving a clean and fair energy transition and goals for sustainable development by 2030. The present work studies the potential of installing Photovoltaic Distributed Generation at Universidad Politecnica de Madrid – Ciudad Universitaria campus. To this end, the study focuses on the electricity generation, carbon reduction and economic feasibility of solar photovoltaic systems installation using and comparing two different approaches based on data input with different time resolution, simulation software and level of details. Results show that the optimal photovoltaic power that maximizes emissions savings also ensures the best economic return, and in addition coincides with the maximum solar potential of the Campus, which is about 3.3 MW. At campus level, approximately 77% of the photovoltaic electricity production would be consumed locally, which would suppose a coverage of about 40% of the total electricity consumption. Emissions savings could reach 30% and an in-depth economic analysis indicates that the project is highly profitable. These results and methodology could be used to assess the feasibility of photovoltaic systems at other universities and help entities study the solar potential of their buildings.

• Maximum long-term sustainability based on use of renewable resources as far as practicable. • Maximum amenity and living space for minimum outside surface. • Maximum southern exposure for passive solar gain, consistent with access to views and vistas. • Conventional construction of shell for practicality and cost. • Good insulation and air-tightness. • Space warming by passive solar heat and air-tight wood stove. • Electrical system based on solar power, and offgrid. • Low water consumption with composting toilet. • Moderate initial cost, low operating cost. • Flexibility in accommodation for visits of extended family.

The paper presents the methodology and the case studies for condition of the Czech Republic of BICOM - BIomass COmpetitiveness Model. The model consists of the following modules: (1) the identification of a biomass potential in a given area using GIS modelling (based on climate and soil conditions), (2) modelling the biomass price (using the methodology of the minimum price from the producer's point of view and evaluating the opportunity cost of conventional agriculture production), (3) modelling the biomass processing and logistics, (4) modelling economic competitiveness of the biomass and coal utilization. Typical price range (without VAT) is 6.9–9.8 EUR/GJ for pellets produced from residual biomass and 7.6–12.4 EUR/GJ for pellets produced from energy crops based on our calculations. Typical price range of coal suitable for local heating is 4.8–5.5 EUR/GJ (without VAT). To reach competitiveness of locally produced solid biofuels introduction would be needed of combination of measures aimed at reduction of minimum price of produced pellets (e.g. subsidies for pelleting technology, improved yields and lower losses) and some measures aimed at restrictions imposed on brown coal (e.g. increase of ecological tax). Saved carbon is calculated for replacement of brown coal by pellets from local biomass, which could be used as argument and benchmark for subsidies targeted on the solid biofuels production from local biomass.