• Energy Research
• 7. Clean energy close
• 12. Responsible consumption close
• 11. Sustainability close
• Bioresource Technology close

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

The possibility of using anaerobic digestate effluent (ADE) to replace freshwater and nutrients for bioethanol production was explored. The ethanol concentration yielded from ADE and post-centrifuged ADE supernatant was 79.60±1.75 g/L and 78.33±1.66 g/L, respectively, with a 24% dry mass (DM) of soft wheat. Ethanol production was enhanced in ADE by as much as 18% in comparison to the production in freshwater (66.61±0.28 g/L, p<0.01). Without yeast nutrients, ADE fermentation yielded an ethanol concentration of 81.10±2.87 g/L, which was significantly higher than that in freshwater fermentation (59.67±1.79 g/L). Analysis showed that ADE contained rich nitrogen, proteins and minerals. After one-step distillation, the ethanol concentration attained was 700.05±46.20 g/L in ADE as compared to 622.79±32.22 g/L in freshwater (p<0.05).

Large-size woody biomass is a valuable renewable resource to replace fossil fuels in biorefinery processes. The preprocessing of wood chips and briquettes is challenging to manage, especially in an industrial setting, as it generates a significant amount of dust and noise and occasionally causes unexpected accidents. As a result, a substantial amount of resources, energy, labor, and space are needed. The thermochemical conversion behavior of large-size woody biomass was studied to reduce energy consumption for chipping. Large-size wood was 1.5 m in length, 0.1 m in breadth, and stacked 90 cm in height. This strategy has many benefits, including increased effectiveness and reduced CO2 emissions. The target of this paper presents the thermochemical process, and large-size wood was chosen because it provides high-quality product gas while reducing the preprocessing fuel cost. This review examines the benefits of thermochemical conversion technologies for assessing the likelihood of carbon neutrality.

This work aims the study of decomposition kinetics of guarana seed residue using thermogravimetric analyzer under synthetic air atmosphere applying heating rates of 5, 10, and 15°C/min, from room temperature to 900°C. Three thermal decomposition stages were identified: dehydration (25.1-160°C), oxidative pyrolysis (240-370°C), and combustion (350-650°C). The activation energies, reaction model, and pre-exponential factor were determined through four isoconversional methods, master plots, and linearization of the conversion rate equation, respectively. A scheme of two-consecutive reactions was applied validating the kinetic parameters of first-order reaction and two-dimensional diffusion models for the oxidative pyrolysis stage (149.57kJ/mol, 6.97×10(10)1/s) and for combustion stage (77.98kJ/mol, 98.611/s), respectively. The comparison between theoretical and experimental conversion and conversion rate showed good agreement with average deviation lower than 2%, indicating that these results could be used for modeling of guarana seed residue.

To fix CO2 emissions efficiently from flue gas of coal-fired power plants, the culture medium, light intensity and bioreactors were comprehensively optimized in the process of CO2 fixation by Chlorella PY-ZU1. To make up for relative insufficiency of nutrients (except for the carbon source) resulting from continuous bubbling of 15% CO2, three chemicals were added into the culture to optimize the molar ratios of nitrogen to carbon, phosphorus to carbon, and magnesium to carbon in culture from 0.17 to 0.69, from 0.093 to 0.096, and from 0.018 to 0.030, respectively. Such adjustments led to a 1.25-fold increase in biomass (from 2.41 to 5.42 g L(-1)). By enhancing light intensity from 4500 to 6000 lux, the peak growth rate of Chlorella PY-ZU1 increased by 99% and reached to 0.95 g L(-1) day(-1). Use of a multi-stage sequential bioreactor notably improved the peak CO2 fixation efficiency to 85.6%.

Biomethane is a flexible energy vector that can be used as a renewable fuel for both the heat and transport sectors. Recent EU legislation encourages the production and use of advanced, third generation biofuels with improved sustainability for future energy systems. The integration of technologies such as anaerobic digestion, gasification, and power to gas, along with advanced feedstocks such as algae will be at the forefront in meeting future sustainability criteria and achieving a green gas supply for the gas grid. This paper explores the relevant pathways in which an integrated biomethane industry could potentially materialise and identifies and discusses the latest biotechnological advances in the production of renewable gas. Three scenarios of cascading biomethane systems are developed.

This study aims to produce biochar and sugars from a macroalga Eucheuma denticulatum using dilute sulfuric acid hydrolysis along with microwave-assisted heating. The reactions were operated at sulfuric acid concentrations of 0.1 and 0.2M, reaction temperatures of 150-170°C and a heating time of 10min. Compared to the raw macroalga, biochar qualities were improved with increased carbon content and lower ash and moisture contents. The calorific value of the biochar could be intensified up to 45%, and 39% of energy yield was recovered. Apart from producing biochar, the highest total reducing sugars were 51.47g/L (74.84% yield) along with a low by-product 5-HMF of 0.20g/L, when the biomass was treated under the optimum conditions at 160°C with 0.1M H2SO4. Thus, this study demonstrated that macroalgae could be potentially used as biomass feedstock under microwave-assisted acid hydrolysis for the production of biofuel and value-added products.

This work studied outdoor pilot scale production of Nannochloropsis gaditana in tubular photobioreactors. The growth and biomass composition of the strain were studied under different culture strategies: continuous-mode (varying nutrient supply and dilution rate) and two-stage cultures aiming lipid enhancement. Besides, parameters such as irradiance, specific nitrate input and dilution rate were used to obtain models predicting growth, lipid and fatty acids production rates. The range of optimum dilution rate was 0.31-0.351/day with maximum biomass, lipid and fatty acids productivities of 590, 110 and 66.8 mg/l day, respectively. Nitrate limitation led to an increase in lipid and fatty acids contents (from 20.5% to 38.0% and from 16.9% to 23.5%, respectively). Two-stage culture strategy provided similar fatty acids productivities (56.4 mg/l day) but the neutral lipids content was doubled.

Rapid pyrolysis of two types of aquatic biomass (blue-green algae and water hyacinth), and their blends with two coals (bituminous and anthracite) was carried out in a high-frequency furnace. Nitrogen conversions during rapid pyrolysis of the two biomass and the interactions between the biomass and coals on nitrogen conversions were investigated. Results show that little nitrogen retained in char after the biomass pyrolysis, and NH(3) yields were higher than HCN. During co-pyrolysis of biomass and coal, interactions between biomass and coal decreased char-N yields and increased volatile-N yields, but the total yields of NH(3)+HCN in volatile-N were decreased in which HCN formations were decreased consistently, while NH(3) formations were only decreased in the high-temperature range but promoted in the low-temperature range. Interactions between blue-green algae and coals are stronger than those between water hyacinth and coal, and interactions between biomass and bituminous are stronger than those between biomass and anthracite.