• Energy Research
• 2021-2025close
• 6. Clean water close
• 12. Responsible consumption close
• Bioresource Technology close

Bioenergy is considered a sustainable substitute to fossil-fuel resources and the development of a prudent combination of renewable and innovative conversion technologies are essential for the valorization and effective conversion of biowaste to value-added commodities. Here, a negative pressure-induced carbonization process was proposed for the valorization of lignin-enriched biowaste precursor to bio-oil and environmental materials (biochar) at various temperatures. The high heating values (HHV) of the as-prepared biochars from the lignin enriched precursor under negative pressure (low-medium vacuum) were within 25.9-31.5 MJ/kg, which matched satisfactorily to the commercial charcoal. Whereas, the bio-oils produced from the lignin enriched precursor under vacuum conditions was a blend of complex aromatic and straight-chain hydro-carbons, including aldehyde, ketone, phenol, and furans, exhibiting ability as potential heating-oil with HHV within 21.2-28.2 MJ/kg. Moreover, the biochars produced under vacuum environments at higher temperature showed greater stability (22.5-35.9%) than those produced under N2 atmosphere.

Sustainable aviation fuels (SAFs) can contribute reduce greenhouse gas emissions compared to conventional fuel. With the increasing SAFs demand, various generations of resources have been shifted from the 1st generation (oil crops), the 2nd generation (agricultural waste), to the 3rd generation (microalgae). Microalgae are the most suitable feedstock for jet biofuel production than other resources because of their productivity and capability to capture carbon dioxide. However, microalgae-based biofuel has a limitation of high freezing point. Recently, a jet biofuel derived from Euglena wax ester has been paying attention due to its low freezing point. Challenges still remain to enhance production yields in both upstream and downstream processes. Studies on downstream processes as well as techno-economic analysis on biofuel production using Euglena are highly limited to date. Economic aspects for the biofuel production will be ensured via valorization of industrial byproducts such as food wastes.

Implementing a circular economy aimed at reusing resources is becoming increasingly important for industry. Microalgae fit within a circular economy by being able to bioremediate nutrient waste and as a source of biomass for several commercial applications. Here, we report a novel validation of a circular economy concept using microalgae at a relevant industrial scale with a new two-phase process. During the first phase biomass was grown autotrophically, biomass was then concentrated using membrane technology for the second phase where mixotrophic conditions were applied to boost growth further. Microalgae cultures were able to grow (13.8 g/L), uptake and bioremediate nutrients (Nitrogen > 134 mg/L/day) from an anaerobic digestion side-stream (digestate), obtaining high quality microalgae biomass (>45% protein content) suitable for use as animal feed, closing the circular economy loop for industrial applications.

Renewable energies will represent an increasing share of the electricity supply, while flue and gasification-derived gases can be a promising CO2 feedstock with a heat load. In this study, microbial electrosynthesis of organic compounds from CO2 at high temperature was proposed as an alternative for valorising energy surplus and decarbonizing the economy. The unremitting fluctuation of renewable energy sources was assessed using two bioreactors at 50 °C, under circumstances of continuous and intermittent power supply (ON-OFF; 8-16 h), simulating an off-grid photovoltaic system. Results highlighted that maximum acetate production rate (43.27 g m-2 d-1) and columbic efficiency (98%) were achieved by working with an intermittent energy supply, while current density was reduced three times. This boosted the production of acetate per unit of electricity provided up to 138 g kWh-1 and reinforced the robustness of the technology by showing resilience to tolerate perturbations and returning to its initial state.

The macroalgal industry is expanding, and the quest for novel ingredients to improve and develop innovative products is crucial. Consumers are increasingly looking for natural-derived ingredients in cosmetic products that have been proven to be effective and safe. Macroalgae-derived compounds have growing popularity in skincare products as they are natural, abundant, biocompatible, and renewable. Due to their high biomass yields, rapid growth rates, and cultivation process, they are gaining widespread recognition as potentially sustainable resources better suited for biorefinery processes. This review demonstrates macroalgae metabolites and their industrial applications in moisturizers, anti-aging, skin whitening, hair, and oral care products. These chemicals can be obtained in combination with energy products to increase the value of macroalgae from an industrial perspective with a zero-waste approach by linking multiple refineries. The key challenges, bottlenecks, and future perspectives in the operation and outlook of macroalgal biorefineries were also discussed.

Microwave-assisted guanidine hydrochloride deep eutectic solvents (DESs) was developed for rapid and efficient pretreatment of castor stalk. The DES synthesized with guanidine hydrochloride and lactic acid showed a better delignification (92.02%) and enzymatic saccharification yield (96.3%) than choline chloride and lactic acid DES resulted. In addition, high-purity (up to 98%) lignin was recovered from the pretreatment liquor. The good recyclability of the guanidine hydrochloride-based DES was also proven with up to 90% cellulose hydrolysis with third-time recycled DES without post purification. The proposed microwave-assisted guanidine hydrochloride/lactic acid DES showed its great potentials as a highly effective and recyclable pretreatment solvent for future biorefinery strategies.

Antibiotics removal and ARGs control in microbial fuel cell (MFC) has received extensive attention. In particular, the critical role of bioelectrochemical characteristics deserves further study. Bioelectrochemical characteristics significantly affected sulfamethoxazole (SMX) removal and ARGs fate, in which the current intensity played a more critical role than anode potential. High-concentration SMX (2 mg/L and 10 mg/L) facilitated the anode potential tend to be close, and thus, the strengthening effect of current on the system was highlighted. However, the SMX degradation pathway under different bioelectrochemical characteristics was not affected. Furthermore, the higher current intensity was preferable to antibiotic removal, but unfavorable for ARGs control might be due to the oxidative stress on microorganisms. Low-concentration SMX (0.5 mg/L) contributed to improving higher electricity generation because of Geobacter enrichement. This study suggested that appropriate bioelectrochemical characteristics regulation in MFCs was essential in removing antibiotics and controlling ARGs.

This study focuses on microwave-assisted pyrolysis (MAP) of fresh waste tea powder and torrefied waste tea powder as feedstocks. Solvents including benzene, acetone, and ethanol were used for soaking feedstocks. The feedstock torrefaction temperature (at 150 °C) and solvents soaking enhanced the yields of char (44.2-59.8 wt%) and the oil (39.8-45.3 wt%) in MAP. Co-pyrolysis synergy induced an increase in the yield of gaseous products (4.7-20.1 wt%). The average heating rate varied in the range of 5-25 °C/min. The energy consumption in MAP of torrefied feedstock (1386 KJ) significantly decreased compared to fresh (3114 KJ). The pyrolysis index dramatically varied with the solvent soaking in the following order: ethanol (26.7) > benzene (25.6) > no solvent (10) > acetone (6). It shows that solvent soaking plays an important role in the pyrolysis process. The obtained bio-oil was composed of mono-aromatics, poly-aromatics, and oxygenated compounds.