• Energy Research
• 2016-2025close
• Bioresource Technology close

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

Microalgae are promising sources of valuable compounds: carotenoids, polyunsaturated fatty acids, lipids, etc. To overcome the feasibility challenge due to low yield and attain commercial potential, researchers merge technologies to enhance algal bioprocess. In this context, nanomaterials are attractive for enhancing microalgal bioprocessing, from cultivation to downstream extraction. Nanomaterials enhance biomass and product yields (mainly lipid and carotenoids) through improved nutrient uptake and stress tolerance during cultivation. They also provide mechanistic insights from recent studies. They also revolutionize harvesting via nano-induced sedimentation, flocculation, and flotation. Downstream processing benefits from nanomaterials, improving extraction and purification. Special attention is given to cost-effective extraction, showcasing nanomaterial integration, and providing a comparative account. The review also profiles nanomaterial types, including metallic nanoparticles, magnetic nanomaterials, carbon-based nanomaterials, silica nanoparticles, polymers, and functionalized nanomaterials. Challenges and future trends are discussed, emphasizing nanomaterials' role in advancing sustainable and efficient microalgal bioprocessing, unlocking their potential for bio-based industries.

Microalgae are promising sources of valuable compounds: carotenoids, polyunsaturated fatty acids, lipids, etc. To overcome the feasibility challenge due to low yield and attain commercial potential, researchers merge technologies to enhance algal bioprocess. In this context, nanomaterials are attractive for enhancing microalgal bioprocessing, from cultivation to downstream extraction. Nanomaterials enhance biomass and product yields (mainly lipid and carotenoids) through improved nutrient uptake and stress tolerance during cultivation. They also provide mechanistic insights from recent studies. They also revolutionize harvesting via nano-induced sedimentation, flocculation, and flotation. Downstream processing benefits from nanomaterials, improving extraction and purification. Special attention is given to cost-effective extraction, showcasing nanomaterial integration, and providing a comparative account. The review also profiles nanomaterial types, including metallic nanoparticles, magnetic nanomaterials, carbon-based nanomaterials, silica nanoparticles, polymers, and functionalized nanomaterials. Challenges and future trends are discussed, emphasizing nanomaterials' role in advancing sustainable and efficient microalgal bioprocessing, unlocking their potential for bio-based industries.

Algae production process is a key cost center in production of biofuels/bioproducts from microalgae. Decline in the growth of algae in outdoor ponds during non-optimal conditions is one of the hurdles for achieving consistently high algal production rates. An optimal controller can be used to overcome this limitation and provide reliable growth in outdoor conditions. A model predictive controller (MPC) was developed to optimize the algal growth, predicted by flux balance analysis, under natural disturbances, embedding within the cost function, the economic and environmental constraints associated with the process. The model, developed in MATLAB, was validated on a 30-L continuous algal culture under light, temperature and a combination of light and temperature disturbances. The MPC proved effective in minimization of a decrease in growth under these natural disturbances. The growth rates with MPC were observed to be 79-116% higher as compared to the non-MPC growth.

Algae production process is a key cost center in production of biofuels/bioproducts from microalgae. Decline in the growth of algae in outdoor ponds during non-optimal conditions is one of the hurdles for achieving consistently high algal production rates. An optimal controller can be used to overcome this limitation and provide reliable growth in outdoor conditions. A model predictive controller (MPC) was developed to optimize the algal growth, predicted by flux balance analysis, under natural disturbances, embedding within the cost function, the economic and environmental constraints associated with the process. The model, developed in MATLAB, was validated on a 30-L continuous algal culture under light, temperature and a combination of light and temperature disturbances. The MPC proved effective in minimization of a decrease in growth under these natural disturbances. The growth rates with MPC were observed to be 79-116% higher as compared to the non-MPC growth.

Large-size woody biomass is a valuable renewable resource to replace fossil fuels in biorefinery processes. The preprocessing of wood chips and briquettes is challenging to manage, especially in an industrial setting, as it generates a significant amount of dust and noise and occasionally causes unexpected accidents. As a result, a substantial amount of resources, energy, labor, and space are needed. The thermochemical conversion behavior of large-size woody biomass was studied to reduce energy consumption for chipping. Large-size wood was 1.5 m in length, 0.1 m in breadth, and stacked 90 cm in height. This strategy has many benefits, including increased effectiveness and reduced CO2 emissions. The target of this paper presents the thermochemical process, and large-size wood was chosen because it provides high-quality product gas while reducing the preprocessing fuel cost. This review examines the benefits of thermochemical conversion technologies for assessing the likelihood of carbon neutrality.

Large-size woody biomass is a valuable renewable resource to replace fossil fuels in biorefinery processes. The preprocessing of wood chips and briquettes is challenging to manage, especially in an industrial setting, as it generates a significant amount of dust and noise and occasionally causes unexpected accidents. As a result, a substantial amount of resources, energy, labor, and space are needed. The thermochemical conversion behavior of large-size woody biomass was studied to reduce energy consumption for chipping. Large-size wood was 1.5 m in length, 0.1 m in breadth, and stacked 90 cm in height. This strategy has many benefits, including increased effectiveness and reduced CO2 emissions. The target of this paper presents the thermochemical process, and large-size wood was chosen because it provides high-quality product gas while reducing the preprocessing fuel cost. This review examines the benefits of thermochemical conversion technologies for assessing the likelihood of carbon neutrality.

This work aims the study of decomposition kinetics of guarana seed residue using thermogravimetric analyzer under synthetic air atmosphere applying heating rates of 5, 10, and 15°C/min, from room temperature to 900°C. Three thermal decomposition stages were identified: dehydration (25.1-160°C), oxidative pyrolysis (240-370°C), and combustion (350-650°C). The activation energies, reaction model, and pre-exponential factor were determined through four isoconversional methods, master plots, and linearization of the conversion rate equation, respectively. A scheme of two-consecutive reactions was applied validating the kinetic parameters of first-order reaction and two-dimensional diffusion models for the oxidative pyrolysis stage (149.57kJ/mol, 6.97×10(10)1/s) and for combustion stage (77.98kJ/mol, 98.611/s), respectively. The comparison between theoretical and experimental conversion and conversion rate showed good agreement with average deviation lower than 2%, indicating that these results could be used for modeling of guarana seed residue.