• Energy Research
• other engineering and technologies close
• DE close
• ES close
• Aurora Universities Network close

Abstract This paper deals with the control of the series FACTS (Flexible AC Transmission Systems) devices for the coordination between their transient stability controller and POD (Power Oscillation Damping) controller in multi-machine power systems. The design aspects and their implementation in form of fuzzy-logic coordination controller are presented. Furthermore, ANFIS (Adaptive Neuro-Fuzzy Inference System) is employed for the training of the proposed fuzzy-logic controller. The local signals of the FACTS devices are applied to achieve the coordination objectives. Digital simulations of multi-machine power system subjected to a wide variety of disturbances validate the efficiency of this approach. The proposed control scheme is not only robust, but also simple and easy to be realized in power systems.

Abstract The combined production of electricity, heat and cold by a polygeneration system connected to a district heating and cooling network can provide high energy utilization efficiency. The inherent complexity of simultaneous production of different services and the high variability in the energy demand make combined cooling and heating systems performance highly dependent on the operational strategy. In this paper, an operational optimization method based on the moving average of real-time measurements of energy demands and ambient conditions is proposed. Real energy demand data from a district heating and cooling network close to Barcelona, Spain, are used to test the method. A complex polygeneration system is considered, consisting of an internal combustion engine, a double-effect absorption chiller, an electric chiller, a boiler and a cooling tower. A detailed modelling of the system is provided, considering partial load behavior of the components and ambient conditions effects. Results of the real-time optimal management are discussed and compared to traditional operational strategies and to the ideal optimal management achievable with perfectly accurate forecast of energy demands. Moreover, the optimal width of the window adopted for the moving average of real-time data is identified.

Light sources are being competitive in the current market. Several types of these products have been widely used in the last two decades. They play a major role on the low voltage network as they produce and inject undesired noise onto the transmission lines of the PLC channel. This noise can be of a serious and negative effect when using the power line communications system to control the automatic switching of lamps in residential areas and public places. The main colour low energy indoor light sources that exist in the market, such as, LEDs and CFLs have been tested for the noise generation on the PLC channel and the results are analyzed and shown in this study. A mathematical analysis of LED bridge rectifier is introduced in this study.

Abstract District heating dynamic models arise as an alternative approach to in-situ experimental investigations. The main advantage of dynamic modeling and simulation is the possibility to avoid technical and operational risks that might occur during in-situ experimental investigations (e.g. heat demand is not met, damages in the energy systems etc.). Within this study, the authors present two models for an existing district heating system in Cottbus, Germany. One model is developed using the tool EBSILON Professional, while the other one is developed using the Simscape toolbox for physical modeling in Matlab/Simulink. The models were experimentally validated against measured data from the considered district heating system. The results show that the Simscape model has a better fit and better response than the EBSILON model. Yet, some discrepancies were found between the measured and the simulated data and, therefore, the uncertainties of the models were addressed. A comparative study between both tools is presented. The EBSILON models permit only unidirectional flow, whereas the Simscape toolbox permits reverse flow. Nevertheless, the EBSILON model outperforms the Simscape model in computation time. In addition, this study presents an approach for dynamic thermo-hydraulic modeling of district heating networks. This approach is utilized to examine the role of district heating networks as heat storage as an optimization configuration. The numerical results show less start-ups for additional heat sources. Yet, higher heat losses from the network are observed due to the installation of unburied pipelines.

Abstract The cathodic electrodeposition of paint on metals proceeds under the influence of an alkalization of the diffusion layer, which is caused by the cathodic reduction of water to yield hydrogen. Three independent electrochemical methods, namely the rotating cone electrode at constant current density, chronopotentiometry and cyclic voltammetry, both at stationary electrodes in stagnant electrolytes, were employed to study the influence of cathodic corrosion of aluminium. It generates initially aluminate as a corrosion product. It was found that the tendency for electrocoagulation is strongly enhanced at Al surfaces in comparison to steel. This is attributed to a higher efficiency due to the in situ formation of intensively dispersed aluminium-oxidhydrate through hydrolysis of the aluminate anions. Thus, the electrocoagulation process is not only an acid/base-reaction with the macro-ions: p - NR 2 H + + A 1 O 2 − → p - NR 2 ↓ + AlOOH ↓, but the presence of AlOOH nuclei improves the formation of a new polymer phase.

Energy consumption is now one of the most important issues for network carriers, since the majority of the energy needed for their operation is consumed in the wireless access and optical transport networks. The continuous growth in the wireless customers and traffic volumes and the consequent energy demand on modern carriers’ broadband infrastructures require reconsidering their energy efficiency, by starting from the formulation of new, more complete and representative network models that should become the foundations for modern energy-aware control plane architectures. Accordingly, this work presents a novel comprehensive energy model for next-generation wireless access-over-optical-transport networks characterized by hybrid power systems (i.e., multiple dynamically available power sources). The objective is to identify the energy-related information that need to be handled at the control plane layer to support energy-aware networking practices. Such information can be made available to suitable energy-aware routing and wavelength assignment algorithms that may exploit them to optimize the overall network energy-consumption and reducing the associated carbon footprint. The proposed model may be taken as a reference for the implementation of new energy-aware control plane protocols (routing and signaling) that make use of power-related considerations to achieve energy-efficiency and energy-awareness in wavelength-routed network infrastructures. Peer Reviewed

A stochastic mixed integer linear optimization scheduling model minimizing system operation costs and treating load and wind power production as stochastic inputs is presented. The schedules are updated in a rolling manner as more up-to-date information becomes available. This is a fundamental change relative to day-ahead unit commitment approaches. The need for reserves dependent on forecast horizon and share of wind power has been estimated with a statistical model combining load and wind power forecast errors with scenarios of forced outages. The model is used to study operational impacts of future high wind penetrations for the island of Ireland. Results show that at least 6000 MW of wind (34% of energy demand) can be integrated into the island of Ireland without significant curtailment and reliability problems.

AbstractSizing by sifting with screens. Viewed physically, screening comprises superposition of segregation, diffusion, and passage through the screen. Frictional and cohesive forces have to be overcome and the coarse feed material transported over the screen, primarlily by circular, elliptical, or linear vibration. The specific screening performance and the sharpness of separation prove to be a measure for the quality of screening. There are three uses for screening: protective screening with mean particle size Dm ≪ mesh w with a simultaneous wish for high screen performance; classification with Dm ≈ w with a desire for greater sharpness of separation; and dust removal with Dm ≫ w and the problem of deagglomeration, i. e. separation of fines from the screened material. The maximum screen performance can be calculated for the coarse range; it is attainable with most screening machines. A problem encountered in the medium to fine size range is prevention of blinding of the screening machine and deagglomeration of sieved material, with attrition phenomena deserving attention. A range of machines is available: casting, planar, tumble, agitator screening machines are available, as are those with deforming screens, those utilizing centrifugal forces, and, as the latest addition, flow screening. New developments concentrate on fine screening, e. g. screening machines with direct activation of the screen fabric, tumble screening machines, combinations of mechanical and pneumatic screening extending through to pure flow screening. Plastic screens made of polyurethane are of advantage for wet screening; they exhibit greatly reduced wear. Safety requirements are met by silenced and explosion‐proof‐screening machines.