• Energy Research
• 7. Clean energy close
• 11. Sustainability close
• CN close
• US close
• HK close
• Transport Research close

Car-sharing services are developing at an ever-increasing pace. Taking into account the reduction of carbon dioxide emissions and pursuit of the sustainable development of transport, implementing electric cars in car-sharing fleets is being proposed. On the one hand, these types of vehicles are referred to as emission-free, but on the other hand, their environmental friendliness is questionable due to the emission of carbon dioxide during the production of energy to power them. Although many scientific papers are devoted to the issue of reducing emissions through car sharing, there is a research gap concerning the real production of carbon dioxide by car-sharing vehicles during car-sharing trips. To fill this research gap, the objective of the article was to analyze the actual level of carbon dioxide emissions from combustion and electric vehicles from car-sharing systems produced when renting rides. The test results showed that the electric car turned out to be significantly less emitting. The use of electric vehicles in car-sharing fleets can reduce carbon dioxide emissions from 14% to 65% compared to using cars with internal combustion engines. However, the key role during car-sharing trips is played by the driving style of the drivers, which has been omitted from the literature to date. This should be properly regulated by service providers and focus on the proper use of energy from electric vehicle batteries, especially at low temperatures. The article provides support for operators planning to modernize their fleet of vehicles and fills the research gap concerning car-sharing emissions.

The COVID-19 pandemic has tremendously affected the whole of human society worldwide. Travel patterns have greatly changed due to the increased risk perception and the governmental interventions regarding COVID-19. This study aimed to identify contributing factors to the changes in public and private transportation mode choice behavior in China after COVID-19 based on an online questionnaire survey. In the survey, travel behaviors in three periods were studied: before the outbreak (before 27 December 2019), the peak (from 20 January to 17 March 2020), and after the peak (from 18 March to the date of the survey). A series of random-parameter bivariate Probit models was developed to quantify the relationship between individual characteristics and the changes in travel mode choice. The key findings indicated that individual sociodemographic characteristics (e.g., gender, age, ownership, occupation, residence) have significant effects on the changes in mode choice behavior. Other key findings included (1) a higher propensity to use a taxi after the peak compared to urban public transportation (i.e., bus and subway); (2) a significant impact of age on the switch from public transit to private car and two-wheelers; (3) more obvious changes in private car and public transportation modes in more developed cities. The findings from this study are expected to be useful for establishing partial and resilient policies and ensuring sustainable mobility and travel equality in the post-pandemic era.

Project: GCOS Earth Heat Inventory - A study under the Global Climate Observing System (GCOS) concerted international effort to update the Earth heat inventory (EHI), and presents an updated international assessment of ocean warming estimates, and new and updated estimates of heat gain in the atmosphere, cryosphere and land over the period from 1960 to present. Summary: The file “GCOS_EHI_1960-2020_Earth_Heat_Inventory_Ocean_Heat_Content_data.nc” contains a consistent long-term Earth system heat inventory over the period 1960-2020. Human-induced atmospheric composition changes cause a radiative imbalance at the top-of-atmosphere which is driving global warming. Understanding the heat gain of the Earth system from this accumulated heat – and particularly how much and where the heat is distributed in the Earth system - is fundamental to understanding how this affects warming oceans, atmosphere and land, rising temperatures and sea level, and loss of grounded and floating ice, which are fundamental concerns for society. This dataset is based on a study under the Global Climate Observing System (GCOS) concerted international effort to update the Earth heat inventory published in von Schuckmann et al. (2020), and presents an updated international assessment of ocean warming estimates, and new and updated estimates of heat gain in the atmosphere, cryosphere and land over the period 1960-2020. The dataset also contains estimates for global ocean heat content over 1960-2020 for different depth layers, i.e., 0-300m, 0-700m, 700-2000m, 0-2000m, 2000-bottom, which are described in von Schuckmann et al. (2022). This version includes an update of heat storage of global ocean heat content, where one additional product (Li et al., 2022) had been included to the initial estimate. The Earth heat inventory had been updated accordingly, considering also the update for continental heat content (Cuesta-Valero et al., 2023).

Plug-in electric vehicles (PEVs) have immense potential for reducing greenhouse gas emissions and dependence on fossil fuels, and for smart grid applications. Although a great deal of research is focused on technological limitations that affect PEV battery performance targets, a major and arguably equal concern is the constraint imposed by the finite availability of elements or resources used in the manufacture of PEV batteries. Availability of resources, such as lithium, for batteries is critical to the future of PEVs and is, therefore, a topic that needs attention. This study addresses the issues related to lithium availability and sustainability, particularly supply and demand related to PEVs and the impact on future PEV growth. In this paper, a detailed review of the research on lithium availability for PEV batteries is presented, key challenges are pinpointed and future impacts on PEV technology are outlined.

This paper presents an integrated vehicle model to simulate simultaneously the driver, powertrains, chassis, body, road condition, vehicle dynamics and the Active Suspension (AS) system with/without an energy harvesting module. The developed model is used to investigate the ride comfort and influences of energy harvesting AS system on the total energy consumption of battery Electric Vehicles (EVs) relative to EVs with a passive suspension system. Preliminary simulation results show that compared to EVs with a passive suspension system, the ones with AS system improve ride comfort, up to 31% reduction of the vehicle body acceleration RMS value, with an expense of higher energy consumption. This expense can be reduced to about 2.8% when using an energy harvesting AS system. Simulation results also demonstrate that the available energy for recuperation during the AS system operation is significant in relation to the regenerative braking energy of the propulsion system, up to approx. 70% on bumpy road surfaces.

Route game is recognized as an effective method to alleviate Braess’ paradox, which generates a new traffic congestion since numerous vehicles obey the same guidance from the selfish route guidance (such as Google Maps). The conventional route games have symmetry since vehicles’ payoffs depend only on the selected route distribution but not who chose, which leads to the precise Nash equilibrium being able to be solved by constructing a special potential function. However, with the arrival of smart cities, the real-time of route schemes is more of a concerned of engineers than the absolute optimality in real traffic. It is not an easy task to re-construct the new potential functions of the route games due to the dynamic traffic conditions. In this paper, compared with the hard-solvable potential function-based precise method, a matched Q-learning algorithm is designed to generate the approximate Nash equilibrium of the classic route game for real-time traffic. An experimental study shows that the Nash equilibrium coefficients generated by the Q-learning-based approximate solving algorithm all converge to 1.00, and still have the required convergence in the different traffic parameters.

Efficient parking tends to be challenging in most large cities in China. Drivers often spend substantial amounts of time looking for parking lots while driving at low speeds, thereby resulting in interference with road traffic. This paper focuses on efficiently allocating parking spaces to the demanders. A double-objective model is proposed that considers both the utilizing rate and the walking distance. First, managers want to utilize parking resources fully. Therefore, they tend to prioritize the efficient distribution of parking spaces in response to parking demands. However, demanders typically choose parking spaces according to convenience. The second objective is the acceptable walking distance from the parking space to the destination. The particle swarm optimization (PSO) algorithm is used to solve this model. We collected parking demand and supply data in a central business district (CBD) of Harbin in China and evaluated the feasibility of the model. The results demonstrate that the proposed model increases the occupying rates of parking lots in residential zones while decreasing the walking distance. The shared use of parking spaces maximizes the utility and alleviates the shortage of parking spaces in downtown.

Freeway bottleneck areas are prone to congestion and have high accident risk. A variable speed limit provides technical support for alleviating congestion and improving traffic safety in such areas. The existing variable speed limit rules in the related literature have a single focus, and most of them do not give specific quantitative speed limits. In this study, a variable speed limit system suitable for freeway bottleneck areas was constructed. Variable speed limit rules under different levels of traffic congestion and adverse weather conditions were designed, and the parameters for freeways were defined. Then, the VISSIM microscopic traffic simulation software was used to build two bottleneck scenarios of a tunnel area and a merging area for simulation tests. The research shows that in these two scenarios, reasonable speed limits can effectively reduce roadway delays and improve the operational efficiency of bottleneck areas in certain traffic flow ranges (e.g., a medium flow of around 900 pcu/h/lane). Unreasonable speed limits in low flow inhibit freeway efficiency more significantly. When congestion has already formed with high flow, different speed limits have a limited effect on efficiency improvement. The research results reported in this paper can provide a theoretical reference for the design and practical application of variable speed limit systems in freeway bottleneck areas. This provides a certain contribution to sustainable traffic development.