• Energy Research
• economics and business close
• PL close
• IT close
• Transport Research close

Car-sharing services are developing at an ever-increasing pace. Taking into account the reduction of carbon dioxide emissions and pursuit of the sustainable development of transport, implementing electric cars in car-sharing fleets is being proposed. On the one hand, these types of vehicles are referred to as emission-free, but on the other hand, their environmental friendliness is questionable due to the emission of carbon dioxide during the production of energy to power them. Although many scientific papers are devoted to the issue of reducing emissions through car sharing, there is a research gap concerning the real production of carbon dioxide by car-sharing vehicles during car-sharing trips. To fill this research gap, the objective of the article was to analyze the actual level of carbon dioxide emissions from combustion and electric vehicles from car-sharing systems produced when renting rides. The test results showed that the electric car turned out to be significantly less emitting. The use of electric vehicles in car-sharing fleets can reduce carbon dioxide emissions from 14% to 65% compared to using cars with internal combustion engines. However, the key role during car-sharing trips is played by the driving style of the drivers, which has been omitted from the literature to date. This should be properly regulated by service providers and focus on the proper use of energy from electric vehicle batteries, especially at low temperatures. The article provides support for operators planning to modernize their fleet of vehicles and fills the research gap concerning car-sharing emissions.

How can urban policies and planning approaches help in achieving a safer mobility and carbon reduction in the transport sector? The attention of planners and policy makers towards the promotion of sustainability and reduction of environmental impacts has grown in recent years. This paper investigates the role that Urban Planning plays in the long term towards a safer and climate friendlier mobility, highlighting the need for integrated approaches gathering spatial planning and mobility management. After a review of several urban policies and planning strategies, initiatives, and approaches, mainly based on the urban scale, the paper presents an urban regeneration case study leading to an increase of pedestrian accessibility at the neighborhood level. This can be seen as a support tool to foster sustainable, safe, and climate friendly mobility in cities. The results of the performed analysis show a dependency of accessibility from two different factors: the distribution of services and the capillarity of the soft mobility network, which can contribute to creating a more walkable space.

The basis for developing logistics solutions in cities is to know the requirements and expectations of current and potential transport users and for decision makers to strive to meet them. In building an urban logistics strategy, it is therefore necessary to take into account different stakeholder groups. Building stakeholder relations should be aimed at involving them in the development of a sustainable transport policy for the city. It should be noted, however, that the importance of stakeholders in transport policy is diverse. This assumption was made in the paper, which aimed to identify the role of the various groups of urban logistics stakeholders in the sustainable movement of people. This challenge is subordinated to the methodology proposed in the paper, which combines the analysis of urban logistics stakeholders and the assignment of roles to them in the pursuit of sustainable flows of people in the city with the identification of tasks in which stakeholders characterized by a particular role should be involved. Achieving the stated goal required collaboration with experts. Research on the roles of stakeholders, as well as the tasks in which they should be involved, was conducted in Polish cities. Infrastructure managers, small mobility organisers, public safety organisations and public transport organisations turned out to be the development leaders who, as a result, were recommended to be included in most tasks by local government units of Polish cities. What deserves special attention in the results obtained, on the other hand, is the role of the unpredictable main player, which is other cities.

The article pertains to the utilization of the application potential of MCDM/MCDA (Multi-Criteria Decision Making/Multi-Criteria Decision Analysis) methods in decision-making problems in the field of transport in light of sustainable development. The article consists of a theoretical and an empirical part. As part of the literature studies, a review was carried out on the latest applications of MCDM/MCDA methods for decision-making problems in the field of transport. In the empirical part, a multi-criteria analysis of the placement selection for a strip of expressway located in north-eastern Poland was carried out. For this purpose, a hybrid approach was used, consisting of three selected MCDM/MCDA methods: DEMATEL, REMBRANDT, and VIKOR. The ranking was compared with the results achieved in the EIA report of the investment and the results were obtained by using a different set of MCDM/MCDA methods that were proposed in the first part of the research, i.e., AHP, Fuzzy AHP, TOPSIS, and PROMETHEE. The performed multi-criteria analyses allowed for an eventual multi-dimensional evaluation of the most popular MCDM/MCDA methods currently applied in the field of transport.

Stone pavements are the historical, architectural, and cultural heritage of lots of cities in Italy and the world. Road managers should be able to make decisions on the global conditions to define the most suitable strategies and maintenance interventions for every type of pavement. There are no standard monitoring methods or criteria for evaluating stone pavement performance. These pavements have more uneven surfaces than traditional pavements, but this characteristic could be accepted if type of vehicles and relative travel conditions are considered. Therefore, it is useful to define criteria for assessing roughness considering the comfort experienced by users in different vehicles. In this research, both traditional and innovative methodologies for assessing irregularities have been investigated using true stone surface profiles. In this regard, traditional performance indicators such as the International Roughness Index (IRI) defined by the ASTM E1926, the ISO 8608 classification, and the frequency-weighted vertical acceleration (awz) provided by ISO 2631-1 for comfort assessment have been considered. In the case of comfort assessment, three dynamic vehicle models (bike, automobile, and bus) have been adopted. Finally, this two-part paper also proposes an innovative straightedge analysis for stone pavements (SASP) to evaluate the effect on traffic of both pavement profile roughness and localized irregularities. In this way, the authors aim to provide an effective tool to monitor stone pavements.

The growing popularity of traveling with electric scooters in recent years is, on the one hand, a great opportunity to shift from the current forms of mobility to a new service among the public, but it is also a huge challenge for urban centers and operators. One of the main challenges related to electric scooters is the growing demand for high energy consumption, which is currently a big issue due to the growing interest in electromobility used in mobility as a service (MaaS) systems. However, in order to properly estimate the level of energy consumption of scooters, there is a real need for reliable scientific information on the actual electricity consumption of electric scooters used in shared mobility systems. An extensive literature analysis indicates the lack of research conducted in this area. Noting this research gap, studies were conducted to determine the factors influencing the energy consumption of an electric scooter. The study attempts to determine these values on the basis of the proposed research experiment. The scientific experiment was based on a three-factor plan; an experimental plan. The author conducted the research by driving and measuring electric scooters in order to compare the actual consumption with the data provided by vehicle manufacturers. The result of the research was to determine the influence of factors that influence the significant energy consumption of electric scooters from shared mobility systems. Interestingly, the results generated show that the electricity requirements for six scooters corresponded to one electric car. This proposal raises the question of whether scooters are the best form of electric mobility for the environment. In addition, the work also includes guidelines for scooter users and recommendations for shared mobility operators on the energy consumption of electric scooters.

Cities have been struggling for many years with many transport problems, including the impact of carbon monoxide emitted by vehicles on the environment, traffic jams, high energy consumption, numerous accidents or high infrastructure costs. There is also a dynamic growth of vehicles on the roads, which is why an increasing number of cities are introducing intelligent transportation systems (ITS), which is part of the concept of smart cities. This paper proposes a new matrix to assess the effects of the ITS implementation in the context of a concept Smart City, which consists of five criteria: (1) movement speed; (2) safety; (3) environmental; (4) economic; (5) satisfaction and amenities for society/passengers. In this new approach the benchmark values of the indicators assigned to the criteria are involved and, therefore, it is possible to determine the level of effectiveness of the ITS in public transport that uses low-carbon energy. This research used literature studies to establish the criteria of effectiveness of ITS as well as a case study, namely public transport that uses low-carbon energy in a Polish city, which had the largest fleet of electric buses in Poland and implements and uses an ITS. Both, the theoretical and the empirical research results demonstrate the usefulness and potency of the proposed matrix to assess the effects of the ITS implementation in cities in the context of the development of a smart city. In that way, the proposed approach may be a useful tool for measuring the effects of ITS implementation in cities.

In the context of global suburbanization and population aging, a low-speed, automated vehicle (LSAV) system provides essential mobility services in suburban residential areas. Although extensive studies on shared autonomous vehicle (SAV) services have been conducted, quantitative investigations on the operation of suburban LSAV systems are limited. Based on a demonstration pilot project of an autonomous vehicle called “Slocal Automated Driving”, we investigated the performance of an SAV system considering several scenarios in Kozoji Newtown, a suburban commuter town in Japan. The agent-based simulation results revealed that 40 LSAVs can satisfy the demands of 2263 daily trips with an average wait time of 15 min. However, in the case of a high-speed scenario, the same fleet size improved the level of service (LOS) by reducing the average wait time to two and a half minutes and halving the in-vehicle time. By contrast, the wait time in terms of the average and 95th percentile of the no-sharing ride scenario drastically deteriorated to an unacceptable level. Based on the fluctuations of hourly share rates, wait times, and the number of vacant vehicles, we determined that preparing for the potential fleet insufficiency periods from 7:00–13:00 and 15:00–18:00 can improve the LOS.