• Energy Research
• 2021-2025close
• engineering and technology close
• Transport Research close

Introduction. The article presents an analysis of researches on the operation of public transport vehicles with an electric drive. Electric buses have been tested in megacities, and despite the advantages, problems were identi- fied both in the selection of the charging type, technological features and with the availability and operation of the charging infrastructure. The operation process is associated with a number of technical restrictions, which in prac- tice make it difficult to select routes for the electric bus operation. The aim of the study is to develop an algorithm for selecting a rational regular urban route for the electric bus operation and to test it on the example of the route network of Tyumen.Materials and methods. A structural diagram of the factors influencing the selection of the route for the electric bus operation has been formed. As a result of processing expert assessments, the most significant factors were identified. The diagram of the interconnections of these factors is identified and limitations for the algorithm are for- mulated based on the theory of systems analysis. The algorithm for selecting the rational regular urban route for the electric bus operation has been developed. It enables creating the simulation model for selecting a rational regular urban route for the operation of an electric bus.Results. The diagram of factors influencing the selection of a rational regular urban route for the operation of an electric bus, taking into account their mutual relations, has been formed. The algorithm and simulation model for se- lecting a rational regular urban route for the operation of an electric bus has been developed. Several urban routes in Tyumen were assessed for the rationality of the introduction of electric buses.Discussion and conclusions. Evaluation of five regular urban routes in Tyumen using the developed algorithm and the simulation model revealed three rational routes, and also showed the inefficiency of the other two. It due to the discrepancy between the duration of the charging session and breaks in operation, as well as the insufficient charge level of the traction battery to ensure the required autonomous movement of the vehicle. In the course of the continuation of these studies, the developed algorithm will be supplemented with the stage of economic assess- ment of routes for the operation of electric buses.

Twenty-minute neighbourhoods highlight the importance of well-connected and mixed-used neighbourhoods and communities with proximate access to employment, essential services, public transport, and open spaces. Shorter distances together with re-prioritised public spaces encourage more active transport choices, resulting in public health benefits and reduced environmental pollution. Higher liveability brought about by mixed-use developments enables people to have equitable access to local facilities, amenities, and employment opportunities, promoting vibrancy, social cohesion, and intergenerational connections. The attributes of 20-minute neighbourhoods also combine to create places, that are acknowledged as friendly for all ages, address changing needs across the life course, and provide better support for the ageing population. Furthermore, there are indications that 20-minute neighbourhoods may be more resilient against many of the negative impacts of stringent public health protocols such as those implemented in periods of lockdown during the Covid-19 pandemic. In this article, we evaluate and compare planning policies and practices aimed at establishing 20-minute neighbourhoods in Melbourne (Australia) and Scotland (the UK). Using case studies, we discuss similarities and differences involved in using place-based approaches of 20-minute neighbourhoods to address 21st-century challenges in key areas of health and wellbeing, equity, environmental sustainability, and community resilience.

Plug-in electric vehicles (PEVs) have immense potential for reducing greenhouse gas emissions and dependence on fossil fuels, and for smart grid applications. Although a great deal of research is focused on technological limitations that affect PEV battery performance targets, a major and arguably equal concern is the constraint imposed by the finite availability of elements or resources used in the manufacture of PEV batteries. Availability of resources, such as lithium, for batteries is critical to the future of PEVs and is, therefore, a topic that needs attention. This study addresses the issues related to lithium availability and sustainability, particularly supply and demand related to PEVs and the impact on future PEV growth. In this paper, a detailed review of the research on lithium availability for PEV batteries is presented, key challenges are pinpointed and future impacts on PEV technology are outlined.

In electrified vehicle applications, understanding the battery characteristics is of great importance as it is the state-of-art principal energy source. The key battery parameters can be identified by one of the robust and nondestructive characterization techniques, such as electrochemical impedance spectroscopy (EIS). However, relaxing the battery cell before performing the EIS method is crucial for the characterization results to be standardized. In this study, the three most common and commercially available lithium-ion technologies (NMC/graphite, LFP/graphite, NCA/LTO) are investigated at 15–45 °C temperature, in the range of 20–80% state of charge (SoC) and in fresh and aged state of health (SoH) conditions. The analysis shows that the duration of the relaxation time before impedance measurement has an impact on the battery’s nonlinear behavior. A rest time of 2 h can be proposed, irrespective of battery health condition, considering neutral technology-based impedance measurement. An impedance growth in ohmic and charge transfer characteristics was found, due to aging, and the effect of rest periods was also analyzed from an electrochemical standpoint. This experimental data was fitted to develop an empirical model, which can predict the nonlinear dynamics of lithium technologies with a 4–8% relative error for longer rest time.

Route game is recognized as an effective method to alleviate Braess’ paradox, which generates a new traffic congestion since numerous vehicles obey the same guidance from the selfish route guidance (such as Google Maps). The conventional route games have symmetry since vehicles’ payoffs depend only on the selected route distribution but not who chose, which leads to the precise Nash equilibrium being able to be solved by constructing a special potential function. However, with the arrival of smart cities, the real-time of route schemes is more of a concerned of engineers than the absolute optimality in real traffic. It is not an easy task to re-construct the new potential functions of the route games due to the dynamic traffic conditions. In this paper, compared with the hard-solvable potential function-based precise method, a matched Q-learning algorithm is designed to generate the approximate Nash equilibrium of the classic route game for real-time traffic. An experimental study shows that the Nash equilibrium coefficients generated by the Q-learning-based approximate solving algorithm all converge to 1.00, and still have the required convergence in the different traffic parameters.

The increasing use of power electronic inverters in electrical drives is leading to the unexpected inception of partial discharges (PD) within the insulation system of electric machine stator windings. Unfortunately, the short rise and fall times of such voltages, below 100 nanoseconds in most cases, create high-magnitude conducted and radiated interferences that affect the measurements. Detecting partial discharges in these systems with inductive or electromagnetic sensors turns to be an important challenge, especially when interference and partial discharges share the same bandwidth. In this work, the authors propose a technique to detect the occurrence of PD in such systems, even when they are masked by disturbances. The proposed technique combines an analog high-pass filter stage and a digital band-pass to select a proper spectral interval. The resulting signal is converted to the base-band, where two metrics based on the peak-to-average power ratio are proposed. Experimental results obtained with the signals acquired with two antennas show that both proposed metrics exhibit a significant increase, about ten times greater, when the applied voltage exceeds the PD inception voltage. These contributions define new markers for the detection of PD events created by pulsed voltages with overlapped overshoots with promising results.

With the increasing demand of driving range of new energy vehicle (NEV), design optimization for energy efficiency of traction motors became more important. However, traction motor design is complex since multiple objectives should be satisfied, such as the required torque-speed operating range and package and thermal constraints. This dramatically increases the computation time of the design optimization process, while the additional energy efficiency objective of the whole driving cycle. This paper proposes an equivalent driving cycle points extraction method, based on energy consumption equivalence to facilitate the design optimization of traction motors. This paper presents necessary rules of multiobjective optimization methods, and then gives an optimization process and proves the effectiveness.

The growing number of electric vehicles in recent years is observable in almost all countries. The country’s energy transition should accompany this rise in electromobility if it is currently generated from non-renewable sources. Only electric vehicles powered by renewable energy sources can be considered zero-emission. Therefore, it is essential to conduct interdisciplinary research on the feasibility of combining energy recovery/generation structures and testing the energy consumption of electric vehicles under real driving conditions. This work presents a comprehensive approach for evaluating the energy consumption of a modern public building–electric vehicle system within a specific location. The original methodology developed includes surveys that demonstrate the required mobility range to be provided to occupants of the building under consideration. In the next step, an energy balance was performed for a novel near-zero energy building equipped with a 199.8 kWp photovoltaic installation, the energy from which can be used to charge an electric vehicle. The analysis considered the variation in vehicle energy consumption by season (winter/summer), the actual charging profile of the vehicle, and the parking periods required to achieve the target range for the user.