• Energy Research
• 7. Clean energy close
• 1. No poverty close
• EU close
• European Marine Science close

Quantitative reliability, availability, and maintainability (RAM) assessments are of fundamental importance at the early design stages, as well as planning and operation of marine renewable energy systems. This paper presents an RAM framework adaptable to different offshore renewable technologies, conceived to provide support in the choice of the device components and subsequent planning of the O&M strategies. A case study, characterizing a pilot farm of oscillating water column (OWC) wave energy converters (WECs), is illustrated together with the method used to obtain reliable estimate of its key performance indicators (KPIs). Based on a fixed feed-in-tariff for the project, economic figures are estimated, showing a direct relationship with the availability of the farm and the cost of maintenance interventions. Consequently, the probability distributions of the most relevant output variables are presented, and the mutual correlations between them investigated using principal components analysis (PCA) with the aim of discovering the relationships influencing the performance of the offshore farm. In this way, the contributions of the individual factors on the profitability of the project are quantified, and generic guidelines to support the decision-making process are derived. It is shown how this type of analysis provides important insights not only to ocean energy farm operators after the deployment of the devices, but also to device developers at the early design stage of wave energy concepts.

The marine environment has been in the spotlight of economic development due to the growing demand for areas to promote activities associated with the concept of Blue Economy. This is the case of the renewable energy and aquaculture sectors, whose expansion towards offshore is determined by the increase global demand for energy and food, and by exceeding of the carrying capacity of coastal and terrestrial systems. In this context, the multi-use strategy can be an alternative to minimize conflicts between activities and impacts on the surrounding social-ecological environment. This contribution presents a preliminary approach to identify opportunities for individual exploitation and the possibilities of multi-use between wind energy, wave energy and aquaculture in Brazil?s Exclusive Economic Zone. Technical, operational, and biological aspects were evaluated, through a Suitability Index validated in previous works, to identify zones with favorable conditions for energy exploitation and farming of six fish species. Additionally, overlaps between conservation areas and multi-use zones were considered to analyze possible spatial conflicts. Zones with multi-use possibilities with different combinations between these sectors were identified: i) wave energy and aquaculture presented the largest areas for multi-use, distributed in the south, southeast and northeast; ii) possibility of combining wind energy and aquaculture was identified in the northeast; and iii) multi-use possibilities in the south for marine energies. Zones with multi-use possibilities were identified in protection and conservation areas, such as the combination of wave exploitation and Greater Amberjack farming, with 63% overlap. Therefore, this case study is a guide for future local studies in the marine region of Brazil, mainly in the selection of sites for analysis. The present contribution represents a starting point for the discussion about multi-use in the country C.V.C. Weiss is grateful to the Brazilian National Council for Scientific and Technological Development (CNPq) for the PDJ (Pós-doutorado Junior) fellowship granted (151228/2020–5), and the financial support from the Universidad de Cantabria (UC) through the Agusto González de Linares and Margarita Salas Grants (POS-UC-2019-06 and RMS-04, respectively). J. Bonetti is a Research Fellow of CNPq (Grant 306633/2019–1). Raúl Guanche acknowledges the Grant RYC-2017-23260 funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”. This work is framed in the project “ACUFLOT”, supported by the Biodiversity Foundation of the Ecological Transition and Demographic Challenge Ministry of Spain and the IHCantabria - Instituto de Hidráulica Ambiental de la Universidad de Cantabria

The biotechnological development has traditionally focused on the compliance with regulatory demands rather than optimising the processes or analysing their sustainability. This work proposes the combination of available tools for the comprehensive sustainability assessment of a blue biotechnology process based on the cultivation of the microalgae Haematococcus pluvialis. The work aims to include environmental, economic and social dimensions to measure the sustainability of the production of a carotenoid with potential applications in food, nutraceutical, cosmetics and eventually pharmaceutical industries. Electricity for cultivation was identified as the major contributor to the environmental impacts, which depended significantly on the production scale. Social benefits were mainly related to workers and consumers, while the economic assessment suggested a profitable process with a relatively short period to recover the initial investment.

A “Well-to-Propeller” Life Cycle Assessment of maritime transport was performed with a European geographical focus. Four typical types of vessels with specific operational profiles were assessed: a container vessel and a tanker (both with 2-stroke engines), a passenger roll-on/roll-off (Ro-Pax) and a cruise vessel (both with 4-stroke engines). All main engines were dual fuel operated with Heavy Fuel Oil (HFO) or Liquefied Natural Gas (LNG). Alternative onshore and offshore fuel supply chains were considered. Primary energy use and greenhouse gas emissions were assessed. Raw material extraction was found to be the most impactful life cycle stage (~90% of total energy use). Regarding greenhouse gases, liquefaction was the key issue. When transitioning from HFO to LNG, the systems were mainly influenced by a reduction in cargo capacity due to bunkering requirements and methane slip, which depends on the fuel supply chain (onshore has 64% more slip than offshore) and the engine type (4-stroke engines have 20% more slip than 2-stroke engines). The combination of alternative fuel supply chains and specific operational profiles allowed for a complete system assessment. The results demonstrated that multiple opposing drivers affect the environmental performance of maritime transport, a useful insight towards establishing emission abatement strategies.

A priority of the industrial applications of microalgae is the reduction of production costs while maximizing algae biomass productivity. The purpose of this study was to carry out a comprehensive evaluation of the effects of pH control on the production of Nannochloropsis gaditana in tubular photobioreactors under external conditions while considering the environmental, biological, and operational parameters of the process. Experiments were carried out in 3.0 m3 tubular photobioreactors under outdoor conditions. The pH values evaluated were 6.0, 7.0, 8.0, 9.0, and 10.0, which were controlled by injecting pure CO2 on-demand. The results have shown that the ideal pH for microalgal growth was 8.0, with higher values of biomass productivity (Pb) (0.16 g L-1 d-1), and CO2 use efficiency ([Formula: see text]) (74.6% w w-1); [Formula: see text]/biomass value obtained at this pH (2.42 [Formula: see text] gbiomass-1) was close to the theoretical value, indicating an adequate CO2 supply. At this pH, the system was more stable and required a lower number of CO2 injections than the other treatments. At pH 6.0, there was a decrease in the Pb and [Formula: see text]; cultures at pH 10.0 exhibited a lower Pb and photosynthetic efficiency as well. These results imply that controlling the pH at an optimum value allows higher CO2 conversions in biomass to be achieved and contributes to the reduction in costs of the microalgae production process.

The most frequently used method to harvest microalgae on an industrial scale is centrifugation, although this has very high energy costs. To reduce these costs, a continuous electrocoagulation process for harvesting Chlorella vulgaris was developed and tested using a pilot-scale 111 L working volume device consisting of an electrolyser with iron electrodes, aggregation channel and lamellar settler. The flow rate of the microalgal suspension through the device was 240 L/h. When using controlled cultivation and subsequent electrocoagulation, a high harvesting efficiency (above 85%), a low Fe contamination in the harvested biomass (<4 mg Fe/g dry biomass, a harvested biomass complied with legislative requirements for food) and significant energy savings were achieved. When comparing electrocoagulation and subsequent centrifugation with the use of centrifugation alone, energy savings were 80 % for a biomass harvesting concentration of 0.23 g/L. Electrocoagulation was thus proven to be a feasible pre-concentration method for harvesting microalgae.

This study aims to improve the design of scour protection around offshore wind turbine monopiles, as well as future-proofing them against the impacts of climate change. A series of large-scale experiments have been performed in the context of the European HYDRALAB-PLUS PROTEUS (Protection of offshore wind turbine monopiles against scouring) project in the Fast Flow Facility in HR Wallingford. These experiments make use of state of the art optical and acoustic measurement techniques to assess the damage of scour protections under the combined action of waves and currents. These novel PROTEUS tests focus on the study of the grading of the scour protection material as a stabilizing parameter, which has never been done under the combined action of waves and currents at a large scale. Scale effects are reduced and, thus, design risks are minimized. Moreover, the generated data will support the development of future scour protection designs and the validation of numerical models used by researchers worldwide. The testing program objectives are: (i) to compare the performance of single-layer wide-graded material used against scouring with current design practices; (ii) to verify the stability of the scour protection designs under extreme flow conditions; (iii) to provide a benchmark dataset for scour protection stability at large scale; and (iv) to investigate the scale effects on scour protection stability.