• Energy Research
• 7. Clean energy close
• NL close
• DE close
• AU close
• CA close
• Netherlands close

This repository consists of two databases- CASE-ONSHORE and CASE-OFFSHORE, generated using OpenFAST v2.4 on NREL's 10-MW reference wind turbine for training data-driven probabilistic load surrogate models. The data is to be used for mapping 10-minute average environmental conditions to the corresponding 10-minute load statistics such as load average, fatigue and range at various locations on the tower and blades.

The repository contains the underlining data for "On the wake deflection of vertical axis wind turbines by pitched blades" This repository consists of experimental (PIV and force measurements) data in the wake of VAWTs with different blade pitch angles. The measured cases include an isolated VAWT with -10, 0, 10 degree pitch, respectively. Author contribution: Ming Huang: Conceptualization; Methodology; Validation; Experimental design; Carrying out the experiment; postprocessing Yugandhar Vijaykumar Patil: Design assistant; Carrying out the experiment; postprocessing Andrea Sciacchitano: Conceptualization; Experimental design; Methodology; Validation; Delphine De Tavernier: Conceptualization Carlos Simao Ferreira: Conceptualization; Methodology; Validation; Experimental design

This study focuses on formulating the most sustainable concrete by incorporating recycled concrete aggregates and other products retrieved from construction and demolition (C&D) activities. Both recycled coarse aggregates (RCA) and recycled fine aggregates (RFA) are firstly used to fully replace the natural coarse and fine aggregates in the concrete mix design. Later, the cement rich ultrafine particles, recycled glass powder and mineral fibres recovered from construction and demolition wastes (CDW) are further incorporated at a smaller rate either as cement substituent or as supplementary additives. Remarkable properties are noticed when the RCA (4–12 mm) and RFA (0.25–4 mm) are fully used to replace the natural aggregates in a new concrete mix. The addition of recycled cement rich ultrafines (RCU), Recycled glass ultrafines (RGU) and recycled mineral fibres (RMF) into recycled concrete improves the modulus of elasticity. The final concrete, which comprises more than 75% (wt.) of recycled components/materials, is believed to be the most sustainable and green concrete mix. Mechanical properties and durability of this concrete have been studied and found to be within acceptable limits, indicating the potential of recycled aggregates and other CDW components in shaping sustainable and circular construction practices. The authors wish to acknowledge the financial support from EU Horizon 2020 Project VEEP ‘‘Cost-Effective Recycling of C&DW in High Added Value Energy Efficient Prefabricated Concrete Compo-nents for Massive Retrofitting of our Built Environment” (No.723582).

The present work focuses on the sampling procedure and quantification of the PAH yield from the fast pyrolysis of waste softwood. In particular, fast pyrolysis experiments were conducted using a CDS Pyroprobe 5200 at temperatures between 500 °C and 1000 °C, at a heating rate of 600 °C/s for a sample size of 30 mg. High performance liquid chromatography (HPLC) was used for the determination of the PAH compounds present in the liquid sample fraction, while a micro – GC was employed for the analysis of the main gaseous products (CO, CO2, CH4 and H2). An alternative tar sampling protocol was proposed, which employed the use of a cold trap (50 °C) and an isopropanol filled impinger bottle for the collection of the condensable products. The experiments were compared to heated foil reactor based pyrolysis tests within the same temperature range and heating rate, except for a slightly lower sample size (10 mg). The Pyroprobe and adapted sampling system proved to be more efficient regarding PAH capture and quantification compared to the heated foil reactor. Naphthalene, acenaphthylene and phenanthrene were the main PAH compounds detected. The PAH yields increased with pyrolysis temperature, up to values corresponding to roughly 0.2 wt% of the overall yield at 1000 °C. From the results it was derived that PAH evolution is mainly a product of secondary decomposition of primary tar, since the char yield stabilized for higher temperatures and the yields of CO, H2 and CH4 increased. Overall mass balance closure values were around 80 wt% on average. Char and gas yields were determined with high reproducibility, however gravimetric liquid analysis lacked due to the inability to gravimetrically measure the yield condensing in the impinger bottle. Future work is aimed on improving on this particular aspect. Overall, the alternative tar sampling system proposed was successful in the quantification of PAH from biomass fast pyrolysis experiments offering increased flexibility, accuracy and practicality of use.

Global transition towards renewable energy production has increased the demand for new and more flexible hydropower operations. Before management and stakeholders can make informed choices on potential mitigations, it is essential to understand how the hydropower reservoir ecosystems respond to water level regulation (WLR) impacts that are likely modified by the reservoirs' abiotic and biotic characteristics. Yet, most reservoir studies have been case-specific, which hampers large-scale planning, evaluation and mitigation actions across various reservoir ecosystems. Here, we investigated how the effect of the magnitude, frequency and duration of WLR on fish populations varies along environmental gradients. We used biomass, density, size, condition and maturation of brown trout (Salmo trutta L.) in Norwegian hydropower reservoirs as a measure of ecosystem response, and tested for interacting effects of WLR and lake morphometry, climatic conditions and fish community structure. Our results showed that environmental drivers modified the responses of brown trout populations to different WLR patterns. Specifically, brown trout biomass and density increased with WLR magnitude particularly in large and complex-shaped reservoirs, but the positive relationships were only evident in reservoirs with no other fish species. Moreover, increasing WLR frequency was associated with increased brown trout density but decreased condition of individuals within the populations. WLR duration had no significant impacts on brown trout, and the mean weight and maturation length of brown trout showed no significant response to any WLR metrics. Our study demonstrates that local environmental characteristics and the biotic community strongly modify the hydropower-induced WLR impacts on reservoir fishes and ecosystems, and that there are no one-size-fits-all solutions to mitigate environmental impacts. This knowledge is vital for sustainable planning, management and mitigation of hydropower operations that need to meet the increasing worldwide demand for both renewable energy and ecosystem services delivered by freshwaters. Data of environmental characteristics and brown trout populations in 102 Norwegian hydropower reservoirsThe data contains field-collected data of brown trout populations in 102 Norwegian reservoirs with variable environmental characteristics. The brown trout data (i.e. response variables) include estimates of: "Biomass" (grams of fish per 100m2 net per night); "Density" (number of fish per 100m2 net per night); "Mean weight" (mean wet mass in grams); "Mean condition" (mean Fulton's condition factor); and "Mean maturity length" (mean total length of mature females in millimeters). All abbreviations for different variables (columns) are explained in the paper. Many reservoirs ("Lake") have various names, some including Norwegian letters (æ, ø & å). Hence, we recommend to use coordinate data (EPSG:4326; "decimalLongitude" and "decimalLatitude") and Norwegian national lake ID numbers ("Lake_nr"; managed by the Norwegian Water Resources and Energy Directorate; www.nve.no) to locate the reservoirs. The variables "Year", "Month" and "Day" refer to times when survey fishing was conducted. Lake morphometry data ("A"=surface area, "SD"=shoreline development) is obtained from NVE database. The lake climatic and catchment data ("T"=mean July air temperature, "NDVI"= Normalized Difference Vegetation Index, and "SL"=terrain slope) is obtained and measured as described by Finstad et al. (2014; DOI: 10.1111/ele.12201). Other abbreviations include: "FC"=presence of other fish species (1=absent, 2=present); "GS"=gillnet series (1=Nordic, 2=Jensen); and "ST"=brown trout stocking (0=no stocking, 1=stocking). The water level regulation (WLR) metrics include: ): "WLR_magnitude"= maximum regulation amplitude; "WLR_frequency"=relative proportion of weeks with a sudden rise or drop in water level; and "WLR_duration"=the relative proportion of weeks with exceptionally low water levels.Data-in_doi.org-10.1016-j.scitotenv.2017.10.268.xlsx

‘Productive Uses of Energy and gender in the Street Food Sector’, is a title of our four year project which is part of the DFID funded ENERGIA Gender and Energy Research programme. This research focuses on male and female owned micro enterprises preparing and selling food in Rwanda, Senegal and South Africa. This sector provides livelihoods for many women and men in these countries and this project provides the gender and energy nexus analysis. One of the primary goals of this project is to influence energy policy making and implementation in the focus countries.

This Excel file summarises the results of the scenarios that use an OTEC growth rate rOTEC of 28% and 40% per year, respectively.

The Flameless Combustion (FC) regime has been pointed out as a promising combustion technique to lower the emissions of nitrogen oxides (NOx) while maintaining low CO and soot emissions, as well as high efficiencies. However, its accurate modeling remains a challenge. The prediction of pollutant species, especially NOx, is affected by the usually low total values that require higher precision from computational tools, as well as the incorporation of relevant formation pathways within the overall reaction mechanism that are usually neglected. The present work explores a multiple step modeling approach to tackle these issues. Initially, a CFD solution with simplified chemistry is generated [both the Eddy Dissipation Model (EDM) as well as the Flamelet Generated Manifolds (FGM) approach are employed]. Subsequently, its computational cells are clustered to form ideal reactors by user-defined criteria, and the resulting Chemical Reactor Network (CRN) is subsequently solved with a detailed chemical reaction mechanism. The capabilities of the clustering and CRN solving computational tool (AGNES—Automatic Generation of Networks for Emission Simulation) are explored with a test case related to FC. The test case is non-premixed burner based on jet mixing and fueled with CH4 tested for various equivalence ratios. Results show that the prediction of CO emissions was improved significantly with respect to the CFD solution and are in good agreement with the experimental data. As for the NOx emissions, the CRN results were capable of reproducing the non-monotonic behavior with equivalence ratio, which the CFD simulations could not capture. However, the agreement between experimental values and those predicted by CRN for NOx is not fully satisfactory. The clustering criteria employed to generate the CRNs from the CFD solutions were shown to affect the results to a great extent, pointing to future opportunities in improving the multi-step procedure and its application.