• Energy Research
• 11. Sustainability close
• 2. Zero hunger close
• AU close
• CA close
• Queensland University of Technology close

Abstract This study presents the largest-known, investigation on discomfort glare with 493 surveys collected from five green buildings in Brisbane, Australia. The study was conducted on full-time employees, working under their everyday lighting conditions, all of whom had no affiliation with the research institution. The survey consisted of a specially tailored questionnaire to assess potential factors relating to discomfort glare. Luminance maps extracted from high dynamic range (HDR) images were used to capture the luminous environment of the occupants. Occupants who experienced glare on their monitor and/or electric glare were excluded from analysis leaving 419 available surveys. Occupants were more sensitive to glare than any of the tested indices accounted for. A new index, the UGP was developed to take into account the scope of results in the investigation. The index is based on a linear transformation of the UGR to calculate a probability of disturbed persons. However all glare indices had some correlation to discomfort, and statistically there was no difference between the DGI, UGR and CGI. The UGP broadly reflects the demographics of the working population in Australia and the new index is applicable to open plan green buildings.

Although considered a current highlight, the concept of intelligent buildings (IB) has not been adopted as quickly and widely as expected. One of the reasons for this is the lack of information and knowledge support to all professionals involved at the design stage of a project. This paper provides a brief overview on the new advances of IB technologies and discusses ways of supplementing the decision making process by adopting two methods for economical and technical aspects of IB applications. It goes on to introduce an on-going research which aims to utilise knowledge based systems to provide comprehensive evaluations to alternatives and decision support to retrofit building projects, when they are being conceptualised.

This research sought to determine optimal corn waste stream-based fermentation medium C and N sources and incubation time to maximize pigment production by an indigenous Indonesian Penicillium spp., as well as to assess pigment pH stability.A Penicillium spp. was isolated from Indonesian soil, identified as Penicillium resticulosum, and used to test the effects of carbon and nitrogen type and concentrations, medium pH, incubation period and furfural on biomass and pigment yield (PY) in a waste corncob hydrolysate basal medium. Maximum red PY (497.03 ± 55.13 mg l(-1)) was obtained with a 21 : 1 C : N ratio, pH 5.5-6.0; yeast extract-, NH(4) NO(3)-, NaNO(3)-, MgSO(4) ·7H(2) O-, xylose- or carboxymethylcellulose (CMC)-supplemented medium and 12 days (25 °C, 60-70% relative humidity, dark) incubation. C source, C, N and furfural concentration, medium pH and incubation period all influenced biomass and PY. Pigment was pH 2-9 stable.Penicillium resticulosum demonstrated microbial pH-stable-pigment production potential using a xylose or CMC and N source, supplemented waste stream cellulose culture medium.Corn derived, waste stream cellulose can be used as a culture medium for fungal pigment production. Such application provides a process for agricultural waste stream resource reuse for production of compounds in increasing demand.

The early childhood years are regarded as the most significant period for human development. Yet, education investments in environmental education (EE)/education for sustainability (EfS) have been largely overlooked in the early years. This chapter offers an analysis of early childhood education for sustainability (ECEfS) theory and practice in Australia – recognised as a leader in ECEfS. It draws on historical and international contexts, key theoretical perspectives and policy directions informing broader uptake. We believe the Australian experience with ECEfS offers pointers for other parts of the world looking to ramp up their ECEfS activities.

This is the first study to assess the current status of solar photovoltaic (PV) adoption across a range of wastewater treatment plant sizes, and to identify the opportunities for solar PV in the wastewater sector. It quantifies solar PV contributions to the energy demand of the wastewater treatment plants and improves knowledge of sector-specific factors influencing PV uptake. California was used as a case study due to its high commitment to solar power and the high data availability. The study compiled and examined data on multiple wastewater treatment plant attributes from 105 Californian plants, representing 78% of total state flows. The analysis focused on the effect of three sector-specific influencing factors: size of wastewater treatment plant, presence/absence of anaerobic digestion and geographical location (urban vs rural). Solar PV adoption was observed to vary significantly with the size of the wastewater treatment plants. Of the 105 plants analysed, 41 installed a solar PV system. Of these 41, 39 were installed in wastewater treatment plants with a flow rate below 50 mega gallons day-1 (MGD). Only two plants with flow above 50 MGD had solar PV installed. In wastewater treatment plants with a flow rate above 5 MGD, solar PV was primarily installed in hybrid configurations with anaerobic digestion. In these plants, biogas contributed 25-65% to the overall energy demand, while solar provided 8-30%. In wastewater treatment plants with a flow rates below 5 MGD, solar PV often represented the only source of renewable energy, producing 30-100% of the energy demand of these plants. Across all the plants analysed, 1 MW was the most adopted solar installation size and solar PV installations were mostly found in wastewater treatment plants in rural settings. While acknowledging multiple other factors of potential influence, these results demonstrate the role of solar PV in wastewater treatment plants under three sector-specific influencing factors. The results will support the sector in making informed decisions over solar PV investments, helping wastewater utilities to transition towards sustainable management practices.

High-density living in inner-urban areas has been promoted to encourage the use of more sustainable modes of travel to reduce greenhouse gas emissions. However, previous research presents mixed results on the relationship between living in proximity to transport systems and reduced car-dependency. This research examines inner-city residents' transportation practices and perceptions, via 24 qualitative interviews with residents from high-density dwellings in inner-city Brisbane, Australia. Whilst participants consider public transport accessible and convenient, car use continues to be relied on for many journeys. Transportation choices are justified through complex definitions of convenience containing both utilitarian and psycho-social elements, with three key themes identified: time-efficiency, single versus multi-modal trips, and distance to and purpose of journey, as well as attitudinal, affective and symbolic elements related to transport mode use. Understanding conceptions of transport convenience held by different segments of the transport users market, alongside other factors strongly implicated in travel mode choice, can ensure targeted improvements in sustainable transport service levels and infrastructure as well as information service provision and behavioural change campaigns.

Global climate change, demographic change and advancing mechanization of everyday life will go along with new ways of living. Temperature extremes, an ageing society and higher demands on a comfortable life will lead to the implementation of sensor based networks in order to create acceptable and improved living conditions. Originally, the idea of the smart home served primarily the efficient use of energy and the optimization of ventilation technology connected with new ways of constructing buildings (low-energy and passive houses, respectively). Today the term 'smart home' is also linked with the networking of home automation systems, home appliances and communications and entertainment electronics. Living in a smart home often makes also significant demands on the occupants who are required to drastically change some of their living habits. This review summarizes current findings on the effect of measured environmental parameters on indoor air quality, individual thermal comfort and living behavior in smart homes with focus on central Europe. A critical evaluation of available sensor technologies, their application in homes and data security aspects as well as limits and possibilities of current technologies to control particles and gaseous pollutants indoors is included. The review also considers the acceptance of smart technologies by occupants in terms of living habits, perceived indoor air quality and data security.

We investigated the effect of maize residues and rice husk biochar on biomass production, fertiliser nitrogen recovery (FNR) and nitrous oxide (N2O) emissions for three different subtropical cropping soils. Maize residues at two rates (0 and 10 t ha−1) combined with three rates (0, 15 and 30 t ha-1) of rice husk biochar were added to three soil types in a pot trial with maize plants. Soil N2O emissions were monitored with static chambers for 91 days. Isotopic 15N-labelled urea was applied to the treatments without added crop residues to measure the FNR. Crop residue incorporation significantly reduced N uptake in all treatments but did not affect overall FNR. Rice husk biochar amendment had no effect on plant growth and N uptake but significantly reduced N2O and carbon dioxide (CO2) emissions in two of the three soils. The incorporation of crop residues had a contrasting effect on soil N2O emissions depending on the mineral N status of the soil. The study shows that effects of crop residues depend on soil properties at the time of application. Adding crop residues with a high C/N ratio to soil can immobilise N in the soil profile and hence reduce N uptake and/or total biomass production. Crop residue incorporation can either stimulate or reduce N2O emissions depending on the mineral N content of the soil. Crop residues pyrolysed to biochar can potentially stabilise native soil C (negative priming) and reduce N2O emissions from cropping soils thus providing climate change mitigation potential beyond the biochar C storage in soils. Incorporation of crop residues as an approach to recycle organic materials and reduce synthetic N fertiliser use in agricultural production requires a thorough evaluation, both in terms of biomass production and greenhouse gas emissions.