• Energy Research
• 2016-2025close
• Open Source close
• Embargo close
• CA close

Engineered cementitious composites (ECCs) are special types of fibre-reinforced cementitious composites (FRCC) with higher strain capacity which can be achieved with low fibre volume as low as 2% and total elimination of coarse aggregates. Due to the outstanding performance of ECCs, they are suitable for various construction and repair applications. However, in order for ECCs to achieve their properties; a high amount of binder which is primarily composed of Portland cement (PC) is used alongside a special type of ultrafine silica sand (USS) which is different from the conventional natural fine aggregates. The production of PC is known to be detrimental to the environment due to its high carbon dioxide emissions coupled with the high consumption of natural resources. Thus, the high use of PC content in ECCs posed a sustainability threat. Similarly, the USS used in ECCs are not readily available everywhere and are expensive. The processing of the USS coupled with its transportation over long distances would also increase the cost and embodied carbon of ECCs. Hence, in order to promote more development and applications of ECCs for various applications; this dissertation aims to provide innovative ways to improve the sustainability of ECCs and their performances. This dissertation offers four solutions to improve the sustainability of ECCs which are (i) use of unconventional industrial by-products as partial replacement of PC (ii) total replacement of PC in ECCs with alternative sustainable binders (iii) replacement of USS in ECCs with recycled materials and (iv) the use of supplementary cementitious materials to replace a high volume of PC. The findings from this study revealed sustainable ECCs with acceptable mechanical and durability performance can be achieved with the use of alternative binders or replacement of the conventional USS used in ECC mixtures. The sustainability and cost assessment of the ECCs indicated that the incorporation of industrial by-products such as blast furnace slag (BFS) especially at higher content is beneficial to reducing the negative environmental impact and economic burden associated with ECCs compared to the conventional ECC. The sustainability index and cost index of the ECCs further showed that the use of BFS is more beneficial when the sustainability and cost of the ECCs are compared with the corresponding performance. Similarly, the use of recycled materials as an alternative to USS was found to result in a significant reduction in the embodied carbon and cost of ECCs. The use of recycled materials such as expanded glass (EG) as aggregates in ECCs was also found to improve the thermal insulation properties of ECCs making such ECC suitable for the production of building envelope elements.

An important limitation of polymer electrolyte fuel cell technology is the low mechanical strength and dimensional instability with changes of water content of proton exchange membranes (PEMs). A range of different approaches to more stable PEMs based on Nafion have been studied of which composite materials of Nafion with mechanically stronger polymers is one of the most promising directions. If successful, they will lead to thinner composite PEMs with enhanced fuel cell performance, life span, and cost-effectiveness. Developed in this thesis are electrospinning conditions for the fabrication of electrospun mats for potential application in PEMs. Polysulfone (PSU), poly vinylidene fluoride-co-hexafluoropropylene (PVDF-HFP), and polyvinylidene fluoride (PVDF) were tested as mechanically stronger but inert (minimal contribution to proton transport) polymers that can tolerate the fuel cell condition. PVDF-HFP generated defect free electrospun mats over a wide range of spinning conditions, while PSU required very specific conditions and no successful conditions were found for PVDF mostly due to over-wetting. These mats might function as mechanical support and could be tested as PEMs when filled with Nafion, but the complete filling of electrospun mats with Nafion has been proven difficult. Instead, the electrospinning of Nafion was tested to explore options of electrospinning mixed mats of two different polymers and co-electrospinning of core-sheath fibers. Two commercial Nafion solutions D520 and D2020 with 5 wt% and 20 wt% content of Nafion were electrospun together with polyethylene oxide of two different molecular weights as a carrier polymer. Mats of sufficient quality for PEM tests were obtained with solutions based on 20 wt% content of Nafion, a low flow rate of 0.2 mL/h, and the lower molecular weight polyethylene oxide as the carrier. Finally, coaxial electrospinning conditions for the formation of core-sheath fibers were developed for Nafion as sheath material and PVDF-HFP or PSU as the core material. Defect-free, core-sheath fibers were generated when the concentration of both solutions was high (20 wt%), the Nafion flow rate was about 0.2 mL/h for the sheath, and the core flow rate was below the flow rate of the sheath (0.1-0.15 mL/h for PVDF-HFP and 0.15 mL/h for PSU). Mats of these core-sheath fibers should provide good mechanical strength combined with much better compatibility with Nafion. A straightforward pore filling with Nafion solutions is expected and their investigation as PEMs in fuel cells is planned as future work.

The stability of winter wheat-flowering-date is crucial for ensuring consistent and robust crop performance across diverse climatic conditions. However, the impact of climate change on wheat-flowering-dates remains uncertain. This study aims to elucidate the influence of climate change on wheat-flowering-dates, predict how projected future climate conditions will affect flowering date stability, and identify the most stable wheat genotypes in the study region. We applied a multi-locus genotype-based (MLG-based) model for simulating wheat-flowering-dates, which we calibrated and evaluated using observed data from the Northern China winter wheat region (NCWWR). This MLG-based model was employed to project flowering dates under different climate scenarios. The simulated flowering dates were then used to assess the stability of flowering dates under varying allelic combinations in projected climatic conditions. Our MLG-based model effectively simulated flowering dates, with a root mean square error (RMSE) of 2.3 days, explaining approximately 88.5 % of the genotypic variation in flowering dates among 100 wheat genotypes. We found that, in comparison to the baseline climate, wheat-flowering-dates are expected to shift earlier within the target sowing window by approximately 11 and 14 days by 2050 under the Representative Concentration Pathways 4.5 (RCP4.5) and RCP8.5 climate scenarios, respectively. Furthermore, our analysis revealed that wheat-flowering-date stability is likely to be further strengthened under projected climate scenarios due to early flowering trends. Ultimately, we demonstrate that the combination of Vrn and Ppd genes, rather than individual Vrn or Ppd genes, plays a critical role in wheat-flowering-date stability. Our results suggest that the combination of Ppd-D1a with winter genotypes carrying the vrn-D1 allele significantly contributes to flowering date stability under current and projected climate scenarios. These findings provide valuable insights for wheat breeders and producers under future climatic conditions.

AbstractThis study investigates the potential recognition and engagement of the natural environment as an important factor in strategic investment decisions by accommodation suppliers in a small island context. The investigation, based on empirical data from two Thai islands, Koh Tao and Koh Phi Phi, contributes to the debate if the environment, by focusing on climate change, can be identified as a primary stakeholder for accommodation suppliers. The findings show that strategic investment decisions are influenced by impacts commonly associated with climate change, although a conscious recognition of climate change as a strategic stakeholder or important factor in strategic investment decisions could not be confirmed. Conversely, the element of unconsciousness in the process of recognising climate change in investment decisions sparks questions regarding the degree to which the recognition of business stakeholders requires being a conscious process and if the focus on investments could be another element for stakeholder identification frameworks for businesses.

Renewable energy projects, such as wind farms and hydropower dams, can indirectly benefit biodiversity by mitigating climate change. However, we explain why such indirect benefits should not contribute towards the accounting of project-level net biodiversity outcomes and provide guidance on the steps needed to legitimately claim no-net-loss of biodiversity.

The deep-sea, defined as the area 200 m below the surface, is facing emerging chemical, physical and biological stressors. Currently, very little is known regarding deep-sea ecosystems both globally and in the Arctic. In this thesis I undertook a literature review on the current understanding of global deep-sea ecosystems through the use of stable isotopes. Specifically, I synthesized the available literature on spatial variation, energy pathways, depth, temporal variation, feeding behaviour, niche, trophic position and body size isotopic trends. This thesis then presents a case study examining the isotopic niche of five teleost and two decapod species within Arctic deep-sea food webs across the localized latitudinal gradient of Baffin Island. Spatial variation in isotopic niche was quantified using 13C and 15N for seven deep-sea species at three locations on Baffin Island, Nunavut to determine whether the “Latitudinal Niche Breadth Hypothesis” which states that niche breadth should increase with latitude holds true in the Arctic. Overall, isotopic patterns in global deep-sea ecosystem are variable; consistent trends are not observed across all taxa and habitats. It was concluded that niche breadth did not consistently increase with latitude in the eastern Canadian Arctic; localized conditions (e.g. sea ice, temperature) and individual condition (e.g. hepatosomatic index) may contribute more to a species’ niche than latitude. Overall, this thesis improves our understanding of deep-sea ecosystems globally, contributes baseline data for future monitoring, and by investigating multiple species and locations it will provide input on how climate change may impact Arctic food web diversity, energy dynamics and ecosystem structure to aid in sustainable fishery development.

AbstractWe report a nickel complex for catalytic oxidation of ammonia to dinitrogen under ambient conditions. Using the aryloxyl radical 2,4,6‐tri‐tert‐butylphenoxyl (tBu3ArO⋅) as a H atom acceptor to cleave the N−H bond of a coordinated NH3 ligand up to 56 equiv of N2 per Ni center can be generated. Employing the N‐oxyl radical 2,2,6,6‐(tetramethylpiperidin‐1‐yl)oxyl (TEMPO⋅) as the H‐atom acceptor, up to 15 equiv of N2 per Ni center are formed. A bridging Ni‐hydrazine product identified by isotopic nitrogen (15N) studies and supported by computational models indicates the N−N bond forming step occurs by bimetallic homocoupling of two paramagnetic [Ni]−NH2 fragments. Ni‐mediated hydrazine disproportionation to N2 and NH3 completes the catalytic cycle.

This paper investigates the potential effects of the use of reference class forecasting on the World Bank's financing decisions, and quantifies the net economic impact of such decisions in the long run. A set of 57 World Bank-financed hydropower projects constructed between 1975 and 2015 was selected based on data availability. The findings show that reference class forecasting can help reduce net losses by preventing some hydropower projects with negative economic net present values from being executed. However, it also leads to the forfeiture of even larger amounts of net economic benefits by causing the rejection of some projects that are found, from ex-post analysis, to be economically worthwhile. Furthermore, because of the increased ex-ante rejection of projects, the loss of potentially economically positive projects from the portfolio of hydro dam projects is greatly increased. The errors in the estimation of economic net present values of these hydropower projects are highly positively correlated to the errors in the estimation of the benefits and only weakly negatively correlated to the errors in the estimation of costs.