• Energy Research
• NL close
• CH close
• English close

The data consists of annual measurements of standing aboveground plant biomass, annual aboveground net primary productivity and annual soil respiration between 1998 and 2012. Data were collected from seven European shrublands that were subject to the climate manipulations drought and warming. Sites were located in the United Kingdom (UK), the Netherlands (NL), Denmark ( two sites, DK-B and DK-M), Hungary (HU), Spain (SP) and Italy (IT). All field sites consisted of untreated control plots, plots where the plant canopy air is artificially warmed during night time hours, and plots where rainfall is excluded from the plots at least during the plants growing season. Standing aboveground plant biomass (grams biomass per square metre) was measured in two undisturbed areas within the plots using the pin-point method (UK, DK-M, DK-B), or along a transect (IT, SP, HU, NL). Aboveground net primary productivity was calculated from measurements of standing aboveground plant biomass estimates and litterfall measurements. Soil respiration was measured in pre-installed opaque soil collars bi-weekly, monthly, or in measurement campaigns (SP only). The datasets provided are the basis for the data analysis presented in Reinsch et al. (2017) Shrubland primary production and soil respiration diverge along European climate gradient. Scientific Reports 7:43952 https://doi.org/10.1038/srep43952 Standing biomass was measured using the non-destructive pin-point method to assess aboveground biomass. Measurements were conducted at the state of peak biomass specific for each site. Litterfall was measured annually using litterfall traps. Litter collected in the traps was dried and the weight was measured. Aboveground biomass productivity was estimated as the difference between the measured standing biomass in year x minus the standing biomass measured the previous year. Soil respiration was measured bi-weekly or monthly, or in campaigns (Spain only). It was measured on permanently installed soil collars in treatment plots. The Gaussen Index of Aridity (an index that combines information on rainfall and temperature) was calculated using mean annual precipitation, mean annual temperature. The reduction in precipitation and increase in temperature for each site was used to calculate the Gaussen Index for the climate treatments for each site. Data of standing biomass and soil respiration was provided by the site responsible. Data from all sites were collated into one data file for data analysis. A summary data set was combined with information on the Gaussen Index of Aridity Data were then exported from these Excel spreadsheet to .csv files for ingestion into the EIDC.

Fashion products made from repurposed materials (e.g., backpacks made from pineapple leaves) have become more prevalent nowadays, and their environmental sustainability is one of the core advantages. Yet, it is currently unclear how consumers respond to products made from repurposed materials. We conducted three experiments to examine the effects of three material features, namely function, sustainability, and distinguishability, on consumer preferences for fashion products made from repurposed materials. The results indicate that, when the function of repurposed materials is as good as that of conventional materials, consumers prefer a product made from repurposed materials over the same product made from conventional materials. Also, consumers in general prefer repurposed materials to be less visually distinguishable. Finally, when the sustainability of the repurposed products is emphasized, consumers appear more likely to choose products made from repurposed materials, even when these products have an inferior function. In conclusion, to promote fashion products made from repurposed materials, marketers may emphasize the function and sustainability of repurposed materials, and producers may manufacture repurposed materials that visually resemble conventional materials.

This database includes more than 100 decarbonisation innovations in Paper, Plastic, Steel and Meat & Dairy sectors, across their value chains, as well as in Finance. For each innovation there is a description, information about its contribution to decarbonisation, actors and collaborators involved, sources of funding, drivers, (co)benefits and disadvantages. More information on the method for selecting innovations for the database is available here. The database was created as part of REINVENT – a Horizon 2020 research project funded by the European Commission (grant agreement 730053). REINVENT involves five research institutions from four countries: Lund University (Sweden), Durham University (United Kingdom), Wuppertal Institute (Germany), PBL Netherlands Environmental Assessment Agency (the Netherlands) and Utrecht University (the Netherlands). More information can be found on our website: www.reinvent-project.eu.

This readme file provides all data and R codes used to perform the analyses presented in Figs. 2-4 of the main text and Supplementary Information Figures S1-S2-S3. FIGURE 2 - Seasonally_dated_GDs.txt: Contains information on the timing (Season) of rockfall (GD) in a given tree (Id) and a given year (yr) over the past 100 years. Inv refers to the operators which analyzed growth disturbances in the tree-ring series. Lat / Long refers to the position of the tree in CH1903/ Swiss Grid projection. Intensity (1-4) refers to (1), intermediate (2) and strong (3) GD. Intensity 4 was attributed to injuries (I). Only the 408 GD rated 3 (strong TRD) and 4 (injuries) were used in Fig. 2. Acronyms used for Response_type read as follows: TRD: Tangential rows of traumatic resin ducts; I: Injuries. Acronyms used for Season refer to Dormancy (1_D), early (2_EE), middle (3_ME) and late (4_LE) earlywood, whereas a GD found in the latewood was attributed to either the early (5_EL) or late (6_LL) latewood. - Trends_in_seasonality_R1.R: The data contained in "Seasonally_dated_GDs" were processed with the R script "Trends_in_Seasonality.R". This seasonal trend analysis code is inspired by work published by Schlögl et al. (2021; https://doi.org/10.1016/j.crm.2021.100294) and Heiser et al. (2022; https://doi.org/10.1029/2011JF002262). FIGURE 3-4-S1 - Tasch_GD.txt: Contains the raw data on rockfall impacts (GD) in a given year (yr) as found in all trees available in that same year (Sample_depth) as well as the cumulated diameter at breast height (cumulated_DBH) of all trees present in that same year. - Rockfall_frequency_climate.R: The data contained in "Tasch_GD.txt" were processed with the R script "Rockfall_frequency_climate.R". - The temperature (Imfeld23_tmp.txt) and precipitation (Imfeld23_prc.txt) data used in Fig. 3 are from the Imfeld et al. 2023 (10.5194/cp-19-703-2023) gridded dataset (1x1 km lat/long) and were extracted at the grid point centered on the Täschgufer site. - The script set with temperature series enables to compute Fig. 4 (l.149:216) and Fig. 3 (l. 216:330); the script set with precipitation series enables to compute Fig. S1 FIGURE S2 - Tasch_GD.txt: Contains the raw data on rockfall impacts (GD) at the Täschgufer site in a given year (yr) as found in all trees available in that same year (Sample_depth) as well as the cumulated diameter at breast height (cumulated_DBH) of all trees present in that same year. - Rockfall_frequency_borehole.R: is adapted from "Rockfall_frequency_climate.R" to work with the borehole dates. - Corvatsch0_6R1: Contains the Corvatsch borehole temperature series (2000-2020, 0.6m depth) (Hoelzle, M. et al. https://doi.org/10.5194/essd-14-1531-2022, 2022). FIGURE S3 - Plattje_GD.txt: Contains the raw data on rockfall impacts (GD) at the Plattje site in a given year (yr) as found all trees available in that same year (Sample_depth) as well as the cumulated diameter at breast height (cumulated_DBH) of all trees present in that same year. - - Rockfall_frequency_climate_Plattje.R: The data contained in "Plattje_GD.txt" were processed with the R script "Rockfall_frequency_climate_Plattje.R". - The temperature (Imfeld23_tmp_Plattje.txt) and precipitation (Imfeld23_prc_Plattje.txt) data used in Fig. 3 are from Imfeld et al. 2023 (10.5194/cp-19-703-2023) gridded dataset (1x1 km lat/long) and were extracted at the grid point centered on the Plattje site.

Dataset of process simulations results of the natural gas sweetening and flue gas treatment (first and second sheet, respectively as indicated by the sheet name in the .xlsx file). The dataset refers to the publication Bayesian Symbolic Learning to Build Analytical Correlations from Rigorous Process Simulations: Application to CO2 Capture Technologies by V. Negri, Vàzquey D., Sales-Pardo, Marta, Guimerà, R. and Guillén-Gosàlbez, G. The training and testing dataset are used to generate the figures in the main manuscript and supplementary information.

Aim: Climate warming and biodiversity loss both alter plant productivity, yet we lack an understanding of how biodiversity regulates the responses of ecosystems to warming. In this study, we examine how plant diversity regulates the responses of grassland productivity to experimental warming using meta-analytic techniques. Location: Global Major taxa studied: Grassland ecosystems Methods: Our meta-analysis is based on warming responses of 40 different plant communities obtained from 20 independent studies on grasslands across five continents. Results: Our results show that plant diversity and its responses to warming were the most important factors regulating the warming effects on plant productivity, among all the factors considered (plant diversity, climate and experimental settings). Specifically, warming increased plant productivity when plant diversity (indicated by effective number of species) in grasslands was lesser than 10, whereas warming decreased plant productivity when plant diversity was greater than 10. Moreover, the structural equation modelling showed that the magnitude of warming enhanced plant productivity by increasing the performance of dominant plant species in grasslands of diversity lesser than 10. The negative effects of warming on productivity in grasslands with plant diversity greater than 10 were partly explained by diversity-induced decline in plant dominance. Main Conclusions: Our findings suggest that the positive or negative effect of warming on grassland productivity depends on how biodiverse a grassland is. This could mainly owe to differences in how warming may affect plant dominance and subsequent shifts in interspecific interactions in grasslands of different plant diversity levels.

This dataset contains measurements of downwelling short wave irradiance, measured in a small scale grid setup at Falkenberg: 20 sensors in 4 by 5 grid with a 50 meter grid spacing. Another 4 sensors were placed in all direction about 5 km away from the main grid at Falkenberg. The sampling rate is 10 Hz, to catch all irradiance variability, and is calibrated against a high quality sun tracker. The strength of this dataset is not the absolute accuracy, but rather the spatial measurements and ability to catch variability. Quality: Accuracy is estimated to be within 5% of a conventional pyranometer. Quality varies depending on weather type, but is best for high solar elevation angles (solar noon +/- 4 hours). Data is manually quality controlled, with detailed quality flags included in the dataset. Some anomalous data is not caught, in particular noisy data due to many insects on the sensor or small dirt from birds that reduces the signal slightly. These effects are much smaller than the driving weather patterns. The data is unsuitable for calculating radiation balances, but it is particularly useful for studying variability and patterns of solar irradiance on small scales. Funding: Dutch Research Council (NWO), Shedding Light On Cloud Shadows: VI.Vidi.192.068 Project: FESSTVaL (Field Experiment on submesoscale spatio-temporal variability in Lindenberg), a measurement campaign initiated by the Hans-Ertel-Center for Weather Research.

This data set contains the essential files used as input for the analysis, intermediate files produced during the analysis, and the key output fields. The code of the analysis is available here: https://github.com/VUB-HYDR/2021_Thiery_etal_Science Input fields: - isimip.zip: Postprocessed ISIMIP2b simulation output. This data set is very similar to the data presented in Lange et al. (2020 Earth's Future) but includes selected additional impact models and scenarios (notably RCP8.5). This data set also includes the gridded population data. - GMT_50pc_manualoutput_4pathways.xlsx: Global mean temperature anomaly trajectories from the IPCC SR15 - wcde_data.xlsx: postprocessed cohort size data originally obtained from the Wittgenstein Centre Human Capital Data Explorer. - WPP2019_MORT_F16_1_LIFE_EXPECTANCY_BY_AGE_BOTH_SEXES.xlsx: Postprocessed life expectancy data originally obtained from the UNited Nations World Population Programme Intermediate files *only use if you're interested in reproducing the results*: - workspaces.zip: Postprocessed ISIMIP2b simulation output. These matlab workspaces contain data on land area annually exposed to extreme events which is stored in a format designed to speed up the analysis. - mw_isimip.mat: ISIMIP2 simulations metadata (e.g. model, gcm and rcp name per simulation) - mw_countries.mat: information on the countries used in the analysis (e.g. border polygon coordinates) - mw_exposure.mat: age-dependent exposure computed from the ISIMIP and population data - mw_exposure_pic.mat: pre-industrial control age-dependent exposure computed from the ISIMIP and population data - mw_exposure_pic_coldwaves.mat: pre-industrial control age-dependent exposure to coldwaves computed from the ISIMIP and population data Output of the analysis: - mw_output.mat: Matlab workspace containing all variables produced during the analysis presented in thepaper. Use this file if you wish to look up certain numbers or want to use the study results for further analysis.