• Energy Research
• other engineering and technologies close
• IT close
• US close
• CH close
• English close

In the study, the effect rates of independent variables (cutting speed, feed rate, cutting depth and tool nose radius) on the dependent variables (surface roughness) used during turning of C45 manufacturing steel were investigated and optimum cutting parameters were determined. Turning experiments were performed according to the L27 orthogonal (Vertical) array of the response surface method (RSM). As independent variables 3 different cutting speeds (160 m/min, 260 m/min and 360 m/min), feed rate (0.05 mm/rpm, 0.18 mm/rpm and 0.31 mm/rpm), cutting depth (0.1 mm, 0.3 mm and 0.5 mm) and tool nose radius (0.4 mm, 0.8 mm and 1.2 mm) were used. As a result analysis of Variance, the effects of independent variables and the effects of interactions on dependent variables were examined. As a result, it was determined that the most effective independent variable on the dependent variable was the feed rate and tool nose radius, respectively, while the effect of cutting speed and cutting depth was found to be low. It was found that while the feed rate increased, the dependent variable increased and the tool nose radius decreased.

The Danish energy system is undergoing a transition from a system based on storable fossil fuels to a system based on fluctuating renewable energy sources. At the same time, more of and more of the energy system is becoming electrified; transportation, heating and fuel usage in industry and elsewhere. This article investigates the development of the Danish energy system in a medium year 2030 situation as well as in a long-term year 2050 situation. The analyses are based on scenario development by the Danish Climate Commission. In the short term, it is investigated what the effects will be of having flexible or inflexible electric vehicles and individual heat pumps, and in the long term it is investigated what the effects of changes in the load profiles due to changing weights of demand sectors are. The analyses are based on energy systems simulations using EnergyPLAN and demand forecasting using the Helena model. The results show that even with a limited short-term electric car fleet, these will have a significant effect on the energy system; the energy system’s ability to integrated wind power and the demand for condensing power generation capacity in the system. Charging patterns and flexibility have significant effects on this. Likewise, individual heat pumps may affect the system operation if they are equipped with heat storages. The analyses also show that the long-term changes in electricity demand curve profiles have little impact on the energy system performance. The flexibility given by heat pumps and electric vehicles in the long-term future overshadows any effects of changes in hourly demand curve profiles. International Journal of Sustainable Energy Planning and Management, Vol 7 (2015)

A new concept of a system for Combined Heat and Power generation is presented. The concept is based on hybrid use of two renewable energy sources, direct solar (thermodynamic solar) and biomass (indirect solar energy). Biomass combustion is conducted using a fluidized bed combustor. A second source of energy, given by the direct irradiation of the bed with a concentrated solar radiation, is integrated in the same system, using the fluidized bed as solar receiver. A Stirling engine converts heat into mechanical power. A Scheffler type mirror is adopted to allow irradiation of the system in a fixed focal point. Advantages of the proposed solution are illustrated and some preliminary results on the performance of the system, obtained with a simple model, are presented. The principal improvements with respect to existing systems of similar size and primary energy source are illustrated. The most important are the enhanced heat transfer processes that are realized with the help of the fluidized bed, and the possibility of continuous cogeneration during the day. Different working conditions are considered to estimate the contribution given by the burning of fuel, in presence as well as in absence of sun irradiation (as during the night). The distribution of energy shares among the different flux contributes is reported versus the amount of biomass burned per unit time. The results clearly demonstrate the advantage of coupling, in the same system, two sources for heat generation, thus maintaining the option of producing electricity without the supply of biomass fuel.

In this paper we argue for the need to apply a cognitive approach to understand deep dynamics and determinants of technological evolutions. After examining main contributions from innovation studies to the conceptualization of innovation and change in complex socio-technical environments, we highlight the contribution coming from the application of the cognitive approach to evolutionary studies on technologies and we introduce the concept of technological memory as an interpretative tool to understand those changes. We discuss our hypothesis with reference to several observations carried out in different local contexts – Mexico, India and Italy – in relation to technological change in the water sector. In those cases deliberate attempts to substitute traditional technologies with modern ones led to interesting trajectories of change ranging from the collapse of old technologies to the development of multifaceted hybridization patterns. Tema. Journal of Land Use, Mobility and Environment, 2014: INPUT 2014 - Smart City: planning for energy, transportation and sustainability of the urban system

Hoang Lien National Park has a total area of 68569ha, located at an altitude of above sea 1000-3000m in the territory of the two provinces of Lai Chau and Lao Cai in Vietnam. It has a diversity of flora with 3252 species (including 775 endemic species and 236 endangered species), belonging to 1126 genera, 230 families and 6 different divisions. Due to the mountainous terrain, division diversity of Hoang Lien National Park’s vegetation is thus clearly characterized by high elevations. We have studied the distribution characteristics of the vegetation by high elevations in Hoang Lien National Park of Vietnam by the general survey methodology, fieldwork, remote sensing digital image processing and analysis and inheriting the preceding research results. The study results indicated the divisions in quantity, vegetation composition, especially differentiation of endemic and rare species in accordance with high elevations. Study results were preliminary used to suggest some orientations for preserving plant diversity in high elevations of the terrain. Vườn quốc gia Hoàng Liên có tổng diện tích 68569ha, nằm ở độ cao từ 1000-3000m so với mặt biển thuộc lãnh thổ hai tỉnh Lai Châu và Lào Cai của Việt Nam. Hệ thực vật của Vườn quốc gia Hoàng Liên rất phong phú với 3252 loài (trong đó có 775 loài đặc hữu và 236 loài quý hiếm), thuộc 1126 chi, 230 họ và 6 ngành khác nhau. Do địa hình núi cao, phân hóa đa dạng nên thảm thực vật của Vườn quốc gia Hoàng Liên có đặc trưng phân hóa theo đai cao rất rõ nét. Bằng các phương pháp điều tra tổng hợp, khảo sát thực địa, xử lí phân tích ảnh viễn thám và kế thừa các kết quả nghiên cứu đi trước nhóm tác giả đã tiến hành nghiên cứu đặc điểm phân bố thảm thực vật theo đai cao tại Vườn quốc gia Hoàng Liên của Việt Nam. Kết quả nghiên cứu chỉ rõ sự phân hoá về số lượng, thành phần hệ thực vật theo đai cao và phân hóa thành phần loài đặc hữu và quý hiếm theo đai cao. Bước đầu nghiên cứu đề xuất một vài định hướng bảo tồn đa dạng thực vật theo đai cao của địa hình. Journal of Vietnamese Environment, Vol 6 No 2 (2014)

As grid price rises and the feed-in tariff declines, the economics of local storage become increasingly lucrative to the system owner. The attractiveness of a local storage investment is compounded in the presence of a PV grid injection cap. The larger the PV system size is relative to this cap level, the greater the opportunity exists to charge the local storage with PV production that would otherwise be dissipated without credit. This study utilizes two household demand profiles that represent the extremes of the potential for local PV self-consumption and, consequently, the range of economic potential that exists for local storage to be coupled with residential PV systems. A series of algorithms were subsequently developed to analyze the related benefit potential of delayed storage charging to target instances of excess PV production in relation to the grid injection cap. 28th European Photovoltaic Solar Energy Conference and Exhibition; 3751-3756

Recently, development projects have provided support to governments to facilitate technology transfer for climate change adaptation and mitigation. These include the Technology Needs Assessment (TNA) funded by the Global Environmental Facility (GEF). In the TNA project, which was implemented in ten African countries from 2010 to 2013, dedicated government committees have prioritized climate change mitigation technologies and developed action plans for the diffusion of the selected technologies. The project results show that solar PV is high on the agenda in Africa. Six out of ten countries in the region prioritized solar PV, and action plans for the diffusion of solar home systems were put forward in Cote d’Ivoire, Kenya, Mali and Senegal, while the implementation of grid-connected systems was proposed in Rwanda, Mali and Senegal. The project reports and technology action plans prepared in these six countries are used as the basis for comparing how solar PV is perceived in these countries and how policy measures enabling environmental adjustments and investment programmes are being planned to promote diffusion of the technology in these different contexts. 1st Africa Photovoltaic Solar Energy Conference and Exhibition Proceedings, AfricaPVSEC 2014

Laser Grooved Buried Contact (LGBC) solar cell technology is an attractive way for the production of solar cells designed to operate at one sun. Although LGBC cells can have higher efficiency when compared to standard screen-printed solar cells, a more complex manufacturing process is required, increasing their relative costs. In the FP6 EU funded project “Lab2Line,” screen print and LGBC solar cell processing techniques are hybridized in order to produce lower cost high efficiency solar cells processed on large area mono-crystalline wafers, using techniques scalable to industry. Two hybrid approaches have been considered: in the first, screen-print (SP) is applied for both rear and front contacts; in the second process SP is applied only to the rear and then electroless plating is used to form the front contacts. Both Lab2Line hybrid approaches offer high average efficiencies with a small performance distribution, while simultaneously presenting a more compact, cost effective option to production. The combination of SP techniques with LGBC processes and electroless plating has led to a maximum efficiency of 17.34% for the first process and 18% (17.44% average on 171 wafers) for the latter. Modules having such cells result in FF of 79.0% and efficiency of 17.0%. 25th European Photovoltaic Solar Energy Conference and Exhibition / 5th World Conference on Photovoltaic Energy Conversion, 6-10 September 2010, Valencia, Spain; 1660-1664

The thin film (TF) solar market is challenged to produce solar modules with higher energy conversion efficiency while at the same time reducing the manufacturing cost. One way to improve the energy efficiency is to move to higher performance systems like Cadmiumtellurid (CdTe) or Cu(In,Ga)(S,Se)2 (CIGS) in comparison to TF Silicon (Si) based technologies. As today’s a-Si and CdTe structuring technology for module development is based on laser scribing, the technology for CIGS modules is mostly dominated by mechanical scribing. As inexpensive as the mechanical scribing technology seems, it has its drawbacks when it comes to high precision scribing of TF materials and, subsequently, the reliability in the manufacturing process. Bringing together a high speed, high accuracy motion system with ultra short pulse laser sources opens up new ways CIGS solar cell production can be perceived. We present with this work an in depth evaluation of the influences of the laser pulse width and wavelength to the CIGS scribing process on glass substrate. A variation of the pulse width in the range of 10 ps to 100 ps and 1 ns up to 30 ns is studied and monitored to determine the influences on the scribing quality. At the end, a functional mini-module is presented featuring a dead zone of less than 200 μm. Incorporating the results into a scribing tool an innovative industrial concept is developed for future integration. An outlook is given on the possible impact on cell efficiency, manufacturing costs, and cost of ownership implementing such a concept into production. 26th European Photovoltaic Solar Energy Conference and Exhibition; 2986-2991