• Energy Research
• Open Access close
• Closed Access close
• other engineering and technologies close
• CN close
• GB close

ABSTRACT: Charging infrastructure supports the rapid development of China's new energy vehicle industry. It not only plays a decisive role in providing accessible and convenient services for electric vehicle (EV) users but also, in one of the seven new infrastructure areas, plays an important role in stabilizing growth and unleashing economic potential during the new coronavirus (COVID-19) pandemic, impacting China's economy. In this study, the system dynamics model was used to predict the development of the EV industry and the demand for charging infrastructure, while considering the influence of policy, increase in EV mileage, and consumer purchase intention index. Furthermore, using the matching of EVs and charging infrastructure in Beijing and policy-oriented sensitivity analysis, a simulation of the construction of battery swap taxis and power stations under three policy scenarios was conducted. This research shows that with policies implemented to support charging infrastructure and swapping compatible taxis, Beijing can achieve its goal of replacing all EVs with fast-swap batteries and fast-charging functions within three years.

Abstract Energy storage systems (ESS) are widely used in active distribution networks (ADN) to smoothen the drastic fluctuation of renewable energy sources (RES). In order to enhance the scalability and flexibility of ESS, a virtual energy storage system (VESS), which is composed of battery energy storage system (BESS), RES as well as flexible loads (FL), is developed in this paper to realize the functionalities of ESS in more cost-effective way in ADN. Aiming at achieving voltage regulation, dynamic pricing strategies based on system voltage condition are designed for VESS. A distributed real-time power management model containing dynamic pricing strategies is proposed to accomplish the voltage regulation and economic power sharing in VESS. Moreover, a set of distributed algorithms, over time-varying unbalanced directed networks, are designed for dynamic pricing strategies and optimal power management model. Furthermore, the convergence property, optimality and system voltage stability are explained by detailed mathematical analysis. Three various case studies which were ran on a real time digital simulator (OPAL-RT OP5600) were designed to validate the effectiveness of the strategy. Finally, simulation results show that the economic power dispatch and voltage regulation are achieved among VESS simultaneously, even in the presence of time-varying directed and unbalanced communication networks.

Wind characteristics (e.g., mean wind speed, gust factor, turbulence intensity and integral scale, etc.) are quite scattered in different measurement conditions, especially during typhoon and/or hurricane processes, which results in the structural engineer ambiguously determining the wind parameters in wind-resistant design of buildings and structures in cyclone-prone regions. In tropical cyclones (including typhoons and hurricanes), the inconsistent wind characteristics may be in part ascribed to the complex flow structure with the coexistence of both mechanical and convective turbulence in the boundary layer of tropical cyclones. Another significant contribution to the scattered wind characteristics is due to various measurement conditions (e.g., terrain exposure and height) and data processing schemes (e.g., averaging time). The removal of the inconsistency in the field-measurement system may offer a more rational comparison of measured wind data from various observation platforms, and hence facilitates a better identification scheme of the wind characteristics to guide the urban planning design and wind-resistant design of buildings and structures. In this study, an analytical framework was firstly proposed to eliminate the potential observation-related effects in wind characteristics and then the wind characteristics of seven field measured tropical cyclones (four typhoons and three hurricanes) were comparatively investigated. Specifically, field measurements of wind characteristics were converted to a standard reference station with a roughness length of 0.03 m, observation duration of 10 min for mean wind and averaging time of 3 s for gusty wind at a 10 m height. The differences of the measured wind characteristics between the typhoons and hurricanes were highlighted. The standardized turbulent wind characteristics under the analytical framework for typhoons and hurricanes were compared with the corresponding recommendations in standard of American Society of Civil Engineers (ASCE 7-10) and Architectural Institute of Japan Recommendations for Loads on Buildings (AIJ-RLB-2004).

To research the flow-induced vibration characteristics of the natural gas loop, unsteady numerical simulation is carried out on the loop calculation model under different ambient temperatures and different flow rates, and the influence of different flow rates on the dynamic characteristics of the flow field and its induced vibration characteristics is obtained. The results show that the inherent frequency of the natural gas loop increases slightly under the action of heat–fluid–solid coupling. The maximum equivalent stress of the loop increases with the increase in ambient temperature under low flow conditions, but it is almost constant under high flow conditions. The smaller the cross-sectional area of the loop pipeline inlet, the greater the pressure, and the more significant the pressure gradient along the flow direction. The pressure pulsation of monitoring points in the pipeline under different flow rates presents different rules, and the pulsation amplitude of pipes with different diameters is different, among which the amplitude of the pipe with a diameter of 250 mm is the largest and that of the pipe with a diameter of 150 mm is the smallest. The pressure pulsation signals are concentrated in the low-frequency band of 0–10 Hz, and the range of the band decreases with the increase in the flow rate. The vibration frequency of the loop structure is close to the fluid pressure pulsation frequency and the inherent frequency under the action of heat–fluid–solid coupling, which causes a resonance of about 2 Hz.

In this study, we investigated the influence of overall financial development and its components on energy consumption using the panel data of 120 countries and the generalized method of moments (GMM). By dividing the sample into developed and developing countries, we further examined the national differences of the impact of financial development on energy consumption. The empirical results indicate that the overall financial development significantly positively impacts energy consumption from a worldwide perspective, and its two components (financial institution and the financial market) have the same effect. The analysis of national differences indicates that the financial development also positively impacts energy consumption in developing countries but with no obvious effect in developed countries. The results also suggest that financial development cannot be used to restrain the increase in energy consumption from the global perspective, and policymakers in developing countries must balance the relationship between the development of the financial sector and energy consumption.

Abstract Previous studies have shown that titanium-based glazes containing silicon and calcium tend to crystallize into titanite. In this work, ZnO was found to be an effective additive to produce rutile but not titanite. Images of the micromorphology showed that the glaze doped with 8 wt% ZnO was UV–VIS–NIR of acicular rutile and granular silica. The refractive index of crystalline rutile is higher than that of crystalline titanite, which leads to higher reflectance in the near-infrared range. However, excessive rutile counteracted this improvement in the UV–VIS–NIR spectrum reflectance of solar energy because it decreased the visible spectrum reflectance. As a result, the best ratio of added ZnO was confirmed to be 2 wt%.

The most severe failures in power grids are often characterized as cascading failures where an initial event triggers consequent failures all along the grid often leading to blackouts. Upon identifying a failure and its cascade potential, timely control actions should be performed by the grid operators to mitigate the effect of the cascade. These actions have to be delivered to one or more control devices, creating a dependency between the power grid and its control network. This paper examines the dependency of the operation of the power grid on the control network. Different from literature studies on failure control, our dependency model captures the impact of networking parameters. We formulate an algorithmic model that describes the impact of this dependency on cascade control. Based on this model, we propose an efficient cascade control algorithm using load shedding with consideration of delays in the communication network for power grids. Finally, we evaluate the impact of the power-communication network dependency with uncontrolled grids, ideal/simple control grids and our proposed control scheme. The results demonstrate that the proposed algorithm can significantly reduce the failure of power lines while sustaining larger power demand for users.