• Energy Research
• 13. Climate action close
• 7. Clean energy close
• 6. Clean water close
• CN close
• GB close
• Sustainability close

In recent years, the rapid development of the rare earth industry has had a serious impact on the environment. Some enterprises have taken measures to improve the production process. In order to explore the sustainability of this industry and these improvements’ environmental benefits, this paper combines emergy analysis and lifecycle assessment to evaluate and compare the production process of rare-earth oxides considering the three aspects of emergy flow, pollutant emissions, and emergy-based indicators. Changes in the emergy of pollutant emissions before and after improvement of the production process are discussed. The results show that the greatest inputs in the mining and beneficiation stage and smelting separation stage are labor force and service and non-renewable resources, respectively. These two production stages are highly dependent on external input and have weak competitiveness. Both stages place great pressure on the environment, so the bastnasite production process would be unsustainable in the long term. After the improvement, the environmental impact of the production process for bastnaesite changed significantly, indicating that the improvement effect of the wastewater treatment facilities and the change of fuel from coal to natural gas is remarkable.

Large amounts of CO2 from human socioeconomic activities threaten environmental sustainability. Moreover, uncontrolled resource use and lack of relevant technology exacerbate this issue. For this reason, carbon capture, utilization, and storage (CCUS) technology has gained worldwide attention. Many scholars have researched CCUS, but few have used CCUS patent bibliometric analysis from a unified perspective. This article aims to provide a conclusive analysis for CCUS researchers and policymakers, as well as summarize the innovation trends, technological distribution, and topic evolution. Based on 11,915 pieces of patent data from the Derwent Innovations Index, we used bibliometric analysis and data mining methods to conduct research on four dimensions: overall trend, geographical distribution, patentees, and patent content. The results of this article are as follows. CCUS has entered a rapid development stage since 2013. Patents are mainly distributed geographically in China, the US, and Japan, especially in heavy industries such as energy and electricity. Large enterprises hold patents with a relatively stable network of cooperators and attach great importance to international patent protection. A total of 12 topics were identified through clustering, and these topics gradually shifted from technicalities to commercialization, and from industrial production to all aspects of people’s daily lives.

The development of advanced computational models for improving the accuracy of streamflow forecasting could save time and cost for sustainable water resource management. In this study, a locally weighted learning (LWL) algorithm is combined with the Additive Regression (AR), Bagging (BG), Dagging (DG), Random Subspace (RS), and Rotation Forest (RF) ensemble techniques for the streamflow forecasting in the Jhelum Catchment, Pakistan. To build the models, we grouped the initial parameters into four different scenarios (M1–M4) of input data with a five-fold cross-validation (I–V) approach. To evaluate the accuracy of the developed ensemble models, previous lagged values of streamflow were used as inputs whereas the cross-validation technique and periodicity input were used to examine prediction accuracy on the basis of root correlation coefficient (R), root mean squared error (RMSE), mean absolute error (MAE), relative absolute error (RAE), and root relative squared error (RRSE). The results showed that the incorporation of periodicity (i.e., MN) as an additional input variable considerably improved both the training performance and predictive performance of the models. A comparison between the results obtained from the input combinations III and IV revealed a significant performance improvement. The cross-validation revealed that the dataset M3 provided more accurate results compared to the other datasets. While all the ensemble models successfully outperformed the standalone LWL model, the ensemble LWL-AR model was identified as the best model. Our study demonstrated that the ensemble modeling approach is a robust and promising alternative to the single forecasting of streamflow that should be further investigated with different datasets from other regions around the world.

To meet power quality requirements, it is necessary to classify and identify the power quality of the power grid connected with renewable energy generation. S-transform (ST) is an effective method to analyze power quality in time and frequency domains. ST is widely used to detect and classify various kinds of non-stationary power quality disturbances. However, the long taper and scaling criteria of the Gaussian window in standard ST (SST) will lead to poor time domain resolution at low frequency and poor frequency resolution at high frequency. To solve the discrete side effects, it is necessary to select the optimal window function to locate the time frequency accurately. This paper proposes a modified ST (MST) method. In this method, an improved window function of energy concentration in time-frequency distribution is introduced to optimize the shape of each window function. This method determines the parameters of Gaussian window to maximize the product of energy concentration in a time-frequency domain within a given time and frequency interval, so as to improve the energy concentration. The result shows that compared with the SST with Gaussian window, ST based on the optimally concentrated window proposed in this paper has better energy concentration in time-frequency distribution.

China’s steel industry is an energy-intensive sector. Synergistic reduction of emissions of CO2 and air pollutants (SO2, NOx, and PM2.5) in the steel industry has an important practical significance for climate change and air pollution control. According to the CO2 emission reduction intensity targets (CERO) and air pollutant emission targets (PERO) for 2020 and 2030, 28 types of energy-saving and emission reduction technologies (20 types of carbon reduction technology and eight types of air pollution end-of-pipe technology) were selected for examination, and a two-stage dynamic optimization model with collaborative implementation of PERO and CERO was built to assess the near future (2015–2020) and long-term (2020–2030) implementation plans for synergistic emissions reduction of CO2 and air pollutants. The results show that in the near future, the implementation of PERO will have a greater synergistic effect on CO2 emission reduction. CO2 emission reduction under PERO in 2020 will be 97 million tons (Mt) higher than that of CERO, an increase of nearly 26%. However, the effects of implementing CERO are better in the long run. Under CERO, the emission reductions of SO2, NOx, and PM2.5 in 2030 are 2.44 Mt, 1.47 Mt, and 0.86 Mt, respectively, and 7%, 4%, and 5% higher than the implementation of PERO. As far as marginal abatement cost is concerned, in the near future, the marginal abatement costs of CO2 and air pollutant equivalents are 1.06 yuan/kgCO2 and 133 yuan/kg pollution equivalent (pe) under PERO, which are 23% and 11% lower than that of CERO, while in the long run, the marginal abatement costs of CO2 and pollutant equivalents under CERO are 0.025 yuan/kgCO2 and 2.73 yuan/kgpe, about 96% and 95% lower than that of PERO.

By using the 2017 National Household Travel Survey (NHTS) data, this study explores the status quo of ownership and usage of conventional vehicles (CVs) and alternative fuel vehicles (AFVs), i.e., Hybrid Electric Vehicles (HEVs), Plug-in Hybrid Electric Vehicles (PHEVs) and Battery Electric Vehicles (BEVs), in the United States. The young ages of HEVs (6.0 years), PHEVs (3.2 years) and BEVs (3.1 years) demonstrate the significance of the 2017 NHTS data. The results show that after two decades of development, AFVs only occupy about 5% of annual vehicle sales, and their share does not show big increases in recent years. Meanwhile, although HEVs still dominate the AFV market, the share of PHEVs & BEVs has risen to nearly 50% in 2017. In terms of ownership, income still seems to be a major factor influencing AFV adoption, with the median annual household incomes of CVs, HEVs, PHEVs and BEVs being $75,000, $100,000, $150,000 and $200,000, respectively. Besides, AFV households are more likely to live in urban areas, especially large metropolitan areas. Additionally, for AFVs, the proportions of old drivers are much smaller than CVs, indicating this age group might still have concerns regarding adopting AFVs. In terms of travel patterns, the mean and 85th percentile daily trip distances of PHEVs and HEVs are significantly larger than CVs, followed by BEVs. BEVs might still be able to replace CVs for meeting most travel demands after a single charge, considering most observed daily trip distances are fewer than 93.5 km for CVs. However, the observed max daily trip distances of AFVs are still much smaller than CVs, implying increasing the endurance to meet extremely long-distance travel demands is pivotal for encouraging consumers to adopt AFVs instead of CVs in the future.

Although it is widely assumed that business activity is dependent on flows of ecosystem services (ES), little evidence is available with which to evaluate this contention. To address this knowledge gap, we conducted a questionnaire survey of business dependencies on twenty-six different ES in the English county of Dorset, where the environment supports a significant component of the local economy. Responses were received from 212 businesses across twenty-eight sectors. While virtually all businesses (98%) were familiar with the concept of ES, dependency on ES was highly divided with 50% of businesses surveyed claiming no dependence on any ES flows. The highest businesses dependencies reported in this study were for regulating services with the ES of water quality and waste water treatment being of particular importance to businesses. The results however, advised that greater efforts are needed in highlighting the indirect benefits provided by Dorset’s ecosystems, with eight business sectors (58% of respondents) claiming no or little dependence on supporting and habitat services including the ES of biodiversity, habitats for species and maintenance of genetic diversity. Many businesses also indicated little or no dependence on the globally important ES of pollination and soil condition, which may reflect a lack of awareness of dependencies occurring upstream of their value chains. At the sector level, businesses directly involved in protecting, extracting, or manufacturing raw materials were found to be more dependent on provisioning, regulatory and supporting ES than those operating in the service sector who favored cultural ES. These results highlight the value of assessing business dependencies on ES flows, which could usefully inform environmental management and accounting systems and improve monitoring of business performance, and thereby contribute to achievement of sustainability goals.