• Energy Research
• other engineering and technologies close
• 7. Clean energy close
• 12. Responsible consumption close
• CN close
• US close
• IN close

A prototype air cycle cooling system, designed for forced cooling of HPOF pipe-type cable, was built under an EPRI contract. Its main components are a turbine and compressor operated on a single high speed shaft and a compact cable. oil to air heat exchanger. Air cooling is supplemented by a spray water system. Tests were conducted on the prototype unit at the EPRI Waltz Mill Cable Test Facility to evaluate its performance and operating characteristics. This paper briefly describes this equipment and presents the results of the test program.

Abstract Compared with other traditional energy sources, renewable energy, which results the less pollution and has numerous resources, is a significant factor in addressing the current issues of the serious environmental pollution and the resource depletion. Large-scale renewable energy integrated to the grid could bring change in both morphological structure and operation modes of energy transmission. Therefore, it is necessary to research the evolution mechanism of the future transmission network with a high proportion of the renewable energy. In this paper, an evolution framework of power system with high proportion of renewable energy is proposed. Firstly, a network equivalence and simplification based on power transfer distribution factors (PTDFs) is proposed, which can effectively simplify the decision-making process of evolution of large-scale power system. Then, an annual production simulation (8760 h) which takes into account renewable energy and load fluctuations is used to find out the bottleneck of the power grid. Based on the above methods, evolution strategy of power system with high proportion of renewable energy is studied for finding out optimal expansion strategy. A real power system of Zhejiang province is used as a test system. Test results demonstrate the feasibility of the proposed evolution framework.

Abstract. The impact of multiphase reactions involving nitrogen dioxide (NO2) and aromatic compounds was simulated in this study. A mechanism (CAPRAM 2.4, MODAC Mechanism) was applied for the aqueous phase reactions, whereas RACM was applied for the gas phase chemistry. Liquid droplets were considered as monodispersed with a mean radius of 0.1 µm and a liquid content (LC) of 50 µg m-3. The multiphase mechanism has been further extended to the chemistry of aromatics, i.e. reactions involving benzene, toluene, xylene, phenol and cresol have been added. In addition, reaction of NO2 with dissociated hydroxyl substituted aromatic compounds has also been implemented. These reactions proceed through charge exchange leading to nitrite ions and therefore to nitrous acid formation. The strength of this source was explored under urban polluted conditions. It was shown that it may increase gas phase HONO levels under some conditions and that the extent of this effect is strongly pH dependent. Especially under moderate acidic conditions (i.e. pH above 4) this source may represent more than 75% of the total HONO/NO2 - production rate, but this contribution drops down close to zero in acidic droplets (as those often encountered in urban environments).

Cold-start (subzero startup) capability of polymer electrolyte fuel cell (PEFC) is of great importance. In this paper, the effects of the micro-porous-layer (MPL), varying start-up temperatures, start-up current density variation on the cold-start operation are investigated. We found PEFC with anode micro-porous-layer (AMPL), compared with one with CMPL, has higher possibility of successful cold start. By analyzing the anode and cathode pressure revolution of PEFC, the effect of MPL on the super cooled water removal and ice formation at different temperatures (-7,-10,-15 and-20℃) are discussed . In addition, we investigate the ice distribution in MEA through the X-ray device, by comparing the initial image when fuel cells shut down (before the produce the water) and final image after failed cold-start. We also explore the negative voltage phenomenon in the initial process of cold-start operation.

Abstract To alleviate the shortage of natural gas resource and ease carbon emissions, a novel solar-driven combined cooling, heating and power (CCHP) system is designed and optimized using the genetic algorithm in the work. Different from the process of direct combustion in a conventional CCHP system, natural gas is firstly converted into syngas by a solar-driven natural gas reforming step, which is consumed in an efficient tri-generation system. Energy, economic and environmental evaluations on five office buildings in different climate zones in China are implemented to validate the advantages of the proposed system. Results show that the annual maximum primary energy saving, total cost saving, and CO2 emission reduction are 69.76%, 49.80%, and 71.55%, respectively. The system located in severe cold zones, where solar energy is abundant and building requires more heat load in whole year, achieves the highest benefits in comparison with separate systems. Furthermore, the sensitivities on the price fluctuations of electricity, natural gas and solar field to the system profits are investigated, which indicates that the influence of electricity price on the system performance is the most significant. Thus, a promising method for reducing the natural gas consumption and improving the utilization efficiency of solar energy is provided.

The global energy demand is increasing due to climate changes and carbon usages. Accumulating evidences showed energy sources using offshore wind from the sea can be added to increase our consumption capacity in long term. In addition, building offshore wind farms can also be environmentally advantageous compared to onshore farms. The assessment of wind energy resources is crucial for the site selection of wind farms. Currently, short-term wind forecast models have been developed to predict the wind power generation. However, methods are needed to improve the forecasting accuracy for ever-changing weather data. So, we try to use deep learning methods to predict long-term wind energy for identifying potential offshore wind farms. The experimental results indicate that PredRNN++ prediction model designed from the spatiotemporal perspective is feasible to evaluate long-term wind energy resources and has better performance than traditional LSTM.

Abstract To further improve the cycle efficiency with the heat transfer curves between higher than 350 °C heat resource and the evaporating working medium of the Kalina cycle and to reduce the exhaust temperature of heat resource, the dual-pressure vaporization Kalina cycle for cascade utilization of high-to-mid grade heat resource is proposed. The optimization was conducted for parameters in this modified Kalina cycle such as concentrations of work solution and basic solution, evaporation dew point temperature. Under the conditions of inlet temperatures of heat resource and cooling water of respectively 400 °C and 25 °C and the constraints of proper heat transfer pinch point temperature differences, the maximum evaporation pressure not exceeds 20 MPa, the vapour quality at the turbine outlet is greater than 0.85 and the exhaust temperature of heat resource is not lower than 90 °C, the optimum parameters are obtained that the work and basic concentrations are 0.45 and 0.272 respectively, the dew point temperature of evaporation is 300 °C, and the corresponding power recovery efficiency of the dual-pressure vaporization Kalina cycle reaches 27%, which is 17% higher than that of the Kalina cycle with optimum parameters.

In this paper, a numerical method coupling moment method with circuit theory is used to analyze the influence of the grounding material's property on the performance of grounding grids. It can be seen that for a large grounding grid, when the soil resistivity is small, the influence of both resistivity and permeability of grounding material on the performance of grounding grids is great. If the frequency is not very high, the grounding material's resistivity can affect the performance of the grounding grid obviously. If the frequency is very low or very high, the effect of the grounding material's permeability on the performance of the grounding grid is small, while the effect is obvious at other frequency.