• Energy Research
• Restricted close
• Embargo close
• 12. Responsible consumption close
• 6. Clean water close
• 1. No poverty close
• CN close
• PK close

Abstract With drastic fossil fuel depletion and environmental deterioration concerns, a move towards a more sustainable bioenergy-based economy is essential. Lately, the application of microwave (MW) irradiation for waste processing has been attracting interest globally. MW-assisted heating possesses several advantages such as the provision of high microwave energy into dielectric materials with deeper penetration for internal heat generation, showing beneficial features in improving the heating rate and reducing the reaction time. Consequently, the most recent literature regarding the applications of MW-assisted heating for biomass pretreatment as well as biofuel and bioenergy production was reviewed and consolidated in this study. An impressive increase in the product yield and improvement of the product properties are reported, with the use of MW-assisted heating in several conversion routes to produce biofuels. Despite being a promising technology for biofuel production, some major fundamental data of MW-assisted heating have not been comprehensively identified. Therefore, the feasibility of this technology for large-scale implementation is still subpar. Understanding the interaction between the feedstock and the microwave electromagnetic field, and the optimization of several operational and mechanical parameters are the two main keystones that would propel the industrialization of MW heating in the near future. This provides key insights leading to increased feasibility and more advanced application of MW heating.

In this work, a novel enhanced deep borehole heat exchanger (EDBHE) was proposed to improve heat extraction efficiency based on the jet grouting method. By means of this technology, a soilcrete zone with high thermal conductivity was built near the wellbore. To analyze the feasibility and efficiency of this method, we firstly constructed a validated deep borehole heat exchanger (DBHE) model based on the field experimental data. Numerical simulations were carried out to investigate the 30-year production performance of EDBHE. Results demonstrated that the jet grouting method is an efficient way for improving thermal output of DBHE. It is evaluated that the average annual heat production rate over a 30-year heating period of EDBHE is 463.2 kW, which is 1.27 times as that of DBHE. Sensitivity analyses indicate that the heat production rate and outlet temperature mainly depend on the height and radius of the artificial soilcrete zone. However, thermal output is not sensitive to thermal conductivity of the soilcrete zone due to the higher thermal resistance of the geological formation. For the experimental site used in this work, the recommended height, radius, and thermal conductivity of the soilcrete are 1000 m, 1.0 m, and 50 W/m °C, respectively.

Abstract In this study, we investigate the driving forces behind the changes in residential energy consumption (REC) in China’s urban and rural areas over the 2001–2012 period. Based on the logarithmic mean Divisia index method, the REC changes are decomposed into seven driving forces, which are climate change, energy price, energy expenditure mix, energy cost share (in total expenditure), expenditure share (in income), per capita income and population effects. According to the results, climate effect due to increasing days with abnormal temperature, energy cost share effect characterized by more expenditure to be paid for energy use, income effect describing constant income growth in the residential sector definitely increase REC in both urban and rural areas. In contrast, energy prices and energy expenditure mix effects negatively contribute to the REC increase, respectively because of the increase in energy prices and the transition from the low-priced energy to high-priced energy. Expenditure share and population effects play opposite roles in urban and rural areas, and the reasons and implications are analysed in depth.

Decreasing nutrient losses from excessive synthetic fertilizer inputs is the direct and valid way to address low nutrient use efficiency and the related environmental consequences. Here, we established a comprehensive database of nitrogen (N), phosphorus (P), and carbon (C) losses from rice paddy fields in China, which we used to evaluate fertilization-induced losses and the impact of environmental factors, and to mitigate losses by adopting alternative fertilization options and setting input thresholds. Our results showed that most N-loss pathways had exponential increases with additional N input. In average, 23.8% of the N applied was lost via NH3 (16.1%), N2O (0.3%), leaching (4.8%), and runoff (2.6%). Total P loss was approximately 2.7% of the input, composed of leaching (1.3%) and runoff (1.4%). C lost as CH4 accounted for 4.9% of the organic C input. A relative importance analysis indicated that climate or soil variation rather than fertilizer rate was the dominant factor driving N and P leaching, and CH4 emissions. Based on the sensitivity of multiple N-loss pathways to N fertilization, we propose upper thresholds for N inputs of 142–191 kg N ha−1 across four rice types, which would avoid dramatic increases in N losses. Compared to conventional chemical fertilization, alternative fertilization options had diverse performances: enhanced-efficiency N fertilizer reduced N loss rate by 7.8 percent points and the global warming potential (GWP, considering N2O and CH4 emissions) by 28.8%; combined manure and chemical N fertilizer reduced N loss rate by 9.0 percent points but increased the GWP by 56.9%; straw return had no effect on total N loss but almost doubled the GWP. Using nutrient sources most appropriate to site-specific conditions is demonstrated as a robust way to decrease nutrient losses. Setting nutrient input thresholds would also contribute to the mitigation of environmental pollution, especially in regions with poor fertilization recommendation systems.

The effect of substrate changes on the performance and microbial community of two-chamber microbial fuel cells (MFCs) was investigated in this study. The MFCs enriched with a single substrate (e.g., acetate, glucose, or butyrate) had different acclimatization capability to substrate changes. The MFC enriched with glucose showed rapid and higher power generation, when glucose was switched with acetate or butyrate. However, the MFC enriched with acetate needed a longer adaptation time for utilizing glucose. Microbial community was also changed when the substrate was changed. Clostridium and Bacilli of phylum Firmicutes were detected in acetate-enriched MFCs after switching to glucose. By contrast, Firmicutes completely disappeared and Geobacter-like species were specifically enriched in glucose-enriched MFCs after feeding acetate to the reactor. This study further suggests that the type of substrate fed to MFC is a very important parameter for reactor performance and microbial community, and significantly affects power generation in MFCs.

Various theories and approaches have been introduced in the debate on how to address sustainable consumption. In this study, we first discuss different theoretical perspectives on sustainable consumption, particularly developed in the fields of economics, social psychology and environmental sociology. We argue that neither an ‘individualist’ nor a system- or structural perspective alone is sufficient for understanding and analysing the transition towards sustainable consumption. Therefore, we propose to apply the Social Practices Approach (SPA) that combines both human agency and social structures to understand sustainable consumption issues. Following the SPA framework, we review and summarize research on sustainable consumption in China in particular on three consumption fields: food, housing energy and mobility. It is found that introducing more efficient production technology is commonly taken as the focal point in these sectors when sustainable consumption was introduced to China. Despite a rising interest in consumers' perceptions of products' sustainability in recent years, research has rarely paid any attention to consumers' behavioural change or to the transition dynamics towards sustainable consumption. In general, ‘individualist’ perspectives have largely dominated Chinese sustainable consumption research. This paper proposes to move attention to a better understanding of Chinese consumption issues by emphasizing the link between the provision of sustainable products and the diverse sustainable consumption practices. Also, images of food, energy, mobility and other consumption products that are undergoing transitions need to be considered in future research as these have consequences for socio-technical changes, material infrastructures and for ‘lifestyle’ innovations.

Abstract Hydrothermal liquefaction (HTL) is a promising technology for converting organic-rich waste biomass such as swine manure (SM) and sewage sludge (SS) into energy-dense bio-crude. Until now, one of the major challenges associated with HTL is the pumpability of high dry-matter containing fibrous feedstocks for continuous processing. In this context, this batch scale study presents a suitable approach for enhancing the pumpability of the fibrous material, specifically SM, by co-processing with SS. Obtained results showed that SM was not pumpable itself due to its fibrous nature, but became pumpable by the addition of SS at overall 25 % dry matter content. It was highlighted that the sample mixture containing ~80 % of the SM was smoothly pumped with 20 % SS. Subsequently, HTL experiments were carried out on samples mixed under the ratios SM:SS (100:0, 0:100, 50:50, 80:20, and 20:80). The highest bio-crude yield (42.38 %) via maximum synergistic effect was obtained from the sample SM/SS (50:50) at ratio 1:1 with the best HHV of 36 MJ/kg. Almost 60–70 % mass of all bio-crudes contained volatiles at 350 °C. ICP-AES measurements revealed that the majority of the inorganic elements were concentrated into the solid phase, while 40–50 % of the potassium and sodium were transferred to the aqueous phase. In conclusion, using SS as a co-substrate with SM not only enhances the pumpability of SM, but its co-liquefaction has demonstrated beneficial synergistic effects on improving the energy recovery of the bio-crude.

This study proposed an efficient way of direct sewage pre-concentration by a combined coagulation microfiltration (CCM) system and an optimal operational strategy of aeration. Compared to two typical technologies for sewage pre-concentration, i.e. direct sewage microfiltration (DSM) and continuous aerated sewage microfiltration (ASM), the CCM system under optimal aeration strategy showed higher concentration efficiency and slower permeability decline (i.e. better control of membrane fouling), and easier collection of retained organic matter (OM). A lab-scale CCM reactor was running continuously for 295 h, and a concentrate of about 16,000 mg COD/L was produced at an average net flux of 13.3 L/(m2 h) and an influent OM recovery of nearly 70%, which was higher than the concentrate produced by a high-loaded membrane bioreactor (MBR) with one day solids retention time. The use of chemical coagulant was found to have little impact on the following anaerobic digestion (AD) process, for anaerobic biodegradability of the concentrate is 56.5% (close to the typical value for blackwater). The integration of the CCM and AD processes could achieve a net energy production of 0.0098 kW h/m3 after deduction of 0.0919 kW h/m3 required for the operation of the CCM system, thus showing promise as an effective OM concentration method for energy recovery from sewage.