• Energy Research
• 2016-2025close
• DE close
• US close
• CN close
• Karlsruhe Institute of Technology close

Abstract Surface structuring in form of streamwise-aligned triangular ridges is investigated in the framework of a fully developed turbulent channel flow with constant wall temperatures of different values prescribed on the upper and lower walls at Re b = 18000 . Two arrangements of the ridges on both channel walls are considered – a symmetrical arrangement and a staggered arrangement with a spanwise shift of the upper wall structure by a half ridge separation. The ridges generate a strong large-scale secondary motion and hence enhance momentum and heat transfer in the channel by approximately 30% relatively to the smooth channel. In spite of the fact that both arrangements translate into very similar global flow properties, the composition of skin friction coefficient and Stanton number significantly differs. The componental split-up of the friction coefficient reveals that the enhancement of momentum transfer mainly originates from the dispersive component linked to the secondary flows. For the Stanton number, however, the enhancement arises not only from the dispersive component, but also from a strong modification of the turbulent flow properties.

The campus of the Karlsruhe Institute of Technology (KIT) contains several waste heat streams. In an effort to reduce greenhouse gas emissions by optimizing thermal power consumption on the campus, researchers at the KIT are proposing a ‘DeepStor’ project, which will sequester waste heat from these streams in an underground reservoir during the summer months, when the heat is not required. The stored heat will then be reproduced in the winter, when the campus’s thermal power demand is much higher. This paper contains a preliminary geochemical risk assessment for the operation of this subsurface, seasonal geothermal energy storage system. We used equilibrium thermodynamics to determine the potential phases and extent of mineral scale formation in the plant’s surface infrastructure, and to identify possible precipitation, dissolution, and ion exchange reactions that may lead to formation damage in the reservoir. The reservoir in question is the Meletta Beds of the Upper Rhein Graben’s Froidefontaine Formation. We modeled scale- and formation damage-causing reactions during six months of injecting 140 °C fluid into the reservoir during the summer thermal storage season and six months of injecting 80 °C fluid during the winter thermal consumption season. Overall, we ran the models for 5 years. Anhydrite and calcite are expected mineral scales during the thermal storage season (summer). Quartz is the predicted scale-forming mineral during the thermal consumption period (winter). Within ~20 m of the wellbores, magnesium and iron are leached from biotite; calcium and magnesium are leached from dolomite; and sodium, aluminum, and silica are leached from albite. These reactions lead to a net increase in both porosity and permeability in the wellbore adjacent region. At a distance of ~20–75 m from the wellbores, the leached ions recombine with the reservoir rocks to form a variety of clays, i.e., saponite, minnesotaite, and daphnite. These alteration products lead to a net loss in porosity and permeability in this zone. After each thermal storage and production cycle, the reservoir shows a net retention of heat, suggesting that the operation of the proposed DeepStor project could successfully store heat, if the geochemical risks described in this paper can managed.

Reducing methane (CH4) emission from paddy rice production is an important target for many Asian countries in order to comply with their climate policy commitments. National greenhouse gas (GHG) inventory approaches like the Tier-2 approach of the Intergovernmental Panel on Climate Change (IPCC) are useful to assess country-scale emissions from the agricultural sector. In paddy rice, alternate wetting and drying (AWD) is a promising and well-studied water management technique which, as shown in experimental studies, can effectively reduce CH4 emissions. However, so far little is known about GHG emission rates under AWD when the technique is fully controlled by farmers. This study assesses CH4 and nitrous oxide (N2O) fluxes under continuous flooded (CF) and AWD treatments for seven subsequent seasons on farmers’ fields in a pumped irrigation system in Central Luzon, Philippines. Under AWD management, CH4 emissions were substantially reduced (73% in dry season (DS), 21% in wet season (WS)). In all treatments, CH4 is the major contributor to the total GHG emission and is, thus, identified as the driving force to the global warming potential (GWP). The contribution of N2O emissions to the GWP was higher in CF than in AWD, however, these only offset 15% of the decrease in CH4 emission and, therefore, did not jeopardize the strong reduction in the GWP. The study proves the feasibility of AWD under farmers’ management as well as the intended mitigation effect. Resulting from this study, it is recommended to incentivize dissemination strategies in order to improve the effectiveness of mitigation initiatives. A comparison of single CH4 emissions to calculated emissions with the IPCC Tier-2 inventory approach identified that, although averaged values showed a sufficient degree of accuracy, fluctuations for single measurement points have high variation which limit the use of the method for field-level assessments.

The necessity of a neutron source for fusion materials research was identified already in the 70s. Though neutrons induced degradation present similarities on a mechanistic approach, thresholds energies for crucial transmutations are typically above fission neutrons spectrum. The generation of He via 56Fe (n,α) 53Cr in future fusion reactors with around 12 appm/dpa will lead to swelling and structural materials embrittlement. Existing neutron sources, namely fission reactors or spallation sources lead to different degradation, attempts for extrapolation are unsuccessful given the absence of experimental observations in the operational ranges of a fusion reactor. Neutrons with a broad peak at 14 MeV can be generated with Li(d,xn) reactions; the technological efforts that started with FMIT in the early 80s have finally matured with the success of IFMIF/EVEDA under the Broader Approach Agreement. The status today of five technological challenges, perceived in the past as most critical, are addressed. These are: 1. the feasibility of IFMIF accelerators, 2. the long term stability of lithium flow at IFMIF nominal conditions, 3. the potential instabilities in the lithium screen induced by the 2 × 5 MW impacting deuteron beam, 4. the uniformity of temperature in the specimens during irradiation, and 5. the validity of data provided with small specimens. Other ideas for fusion material testing have been considered, but they possibly are either not technologically feasible if fixed targets are considered or would require the results of a Li(d,xn) facility to be reliably designed. In addition, today we know beyond reasonable doubt that the cost of IFMIF, consistently estimated throughout decades, is marginal compared with the cost of a fusion reactor. The less ambitious DEMO reactor performance being considered correlates with a lower need of fusion neutrons flux; thus IFMIF with its two accelerators is possibly not needed since with only one accelerator as the European DONES or the Japanese A-FNS propose, the present needs > 10 dpa/fpy would be fulfilled. World fusion roadmaps stipulate a fusion relevant neutron source by the middle of next decade, the success of IFMIF/EVEDA phase is materializing this four decades old dream.

The transition from land to sea affects the wind field in coastal regions. From the perspective of near-coastal offshore wind farms, the coastal transition complicates the task of energy resource assessment by, for example, introducing non-homogeneity into the free wind field. To help elucidate the matter, we quantify the average horizontal wind speed gradients at progressively increasing distances from the German coast using two years of hourly ERA5 reanalysis data, and further describe the dependence of wind speed gradients on the measurement height, atmospheric stability, and season. A vertical wind lidar located on Norderney Island near the German mainland acts as our observational reference for the ERA5 data, where a good agreement ( R 2 = 0 . 9 3 $R^2 =\nobreak 0.93$ ) is found despite the relatively coarse ERA5 data resolution. Interestingly, the comparison of lidar data with the higher-resolution Weather Research and Forecasting (WRF) mesoscale model yields good but relatively weaker agreement ( R 2 = 0 . 8 5 $R^2 =\nobreak 0.85$ ). The ERA5 data reveal that, for flow over the North Sea originating from the German mainland from the south, the wind speed at 10 m (110 m) above sea level increases by 30 % (20 %) some 80 km from the coast on average, and by 5 % at larger heights. An increased stratification increases the horizontal wind speed gradient at 10 m above sea level but decreases it at 110 m. Case studies using satellite and flight measurements are first analyzed to help reveal some of the underlying mechanisms governing horizontal wind speed gradients, including cases of decreasing wind speed with increasing distance from the coast, in which stable flow of warm air over the colder sea leads to an overall deceleration of the flow. The accuracy of offshore resource assessment appears to profit from utilising the horizontal wind speed gradient information contained in ERA5 reanalysis data.

Is it true that a nuclear technology approach to generate electric energy offers a clean, safe, reliable and affordable, i.e., sustainable option? In principle yes, however a technology impact on the environment strongly depends on the actual implementation bearing residual risks due to technical failures, human factors, or natural catastrophes. A full response is thus difficult and can be given first when the wicked multi-disciplinary issues get well formulated and “resolved”. These problems are lying at the interface between: the necessary R&D effort, the industrial deployment and the technology impact in view of the environmental sustainability including the management of produced hazardous waste. As such, this problem is clearly of multi-dimensional nature. This enormous complexity indicates that just a description of the problem might cause a dilemma. The paper proposes a novel holistic approach applying Multi-Criteria Decision Analysis to assess the potential of nuclear energy systems with respect to a sustainable performance. It shows how to establish a multi-level criteria structure tree and examines the trading-off techniques for scoring and ranking of options. The presented framework allows multi-criteria and multi-group treatment. The methodology can be applied to support any pre-decisional process launched in a country to find the best nuclear and/or non-nuclear option according to national preferences and priorities. The approach addresses major aspects of the environmental footprint of nuclear energy systems. As a case study, advanced nuclear fuel cycles are analyzed, which were previously investigated by the Nuclear Energy Agency (NEA/OECD) expert group WASTEMAN. Sustainability facets of waste management, resource utilization and economics are in focus.

Abstract State-of-the-art optical sorting systems suffer from delays between the particle detection and separation stage, during which the material movement is not accounted for. Commonly line scan cameras, using simple assumptions to predict the future particle movement, are employed. In this study, a novel prediction approach is presented, where an area scan camera records the particle movement over multiple time steps and a tracking algorithm is used to reconstruct the corresponding paths to determine the time and position at which the material reaches the separation stage. In order to assess the benefit of such a model at different operating parameters, an automated optical belt sorter is numerically modelled and coupled with the tracking procedure. The Discrete Element Method (DEM) is used to describe the particle–particle as well as particle–wall interactions, while the air nozzles required for deflecting undesired material fractions are described with Computational Fluid Dynamics (CFD). The accuracy of the employed numerical approach is ensured by comparing the separation results of a predefined sorting task with experimental investigations. The quality of the aforementioned prediction models is compared when utilizing different belt lengths, nozzle activation durations, particle types, sampling frequencies and detection windows. Results show that the numerical model of the optical belt sorter is able to accurately describe the sorting system and is suitable for detailed investigation of various operational parameters. The proposed tracking prediction model was found to be superior to the common line scan camera method in all investigated scenarios. Its advantage is especially profound when difficult sorting conditions, e.g. short conveyor belt lengths or uncooperative moving bulk solids, apply.