• Energy Research
• 7. Clean energy close
• DE close
• NL close

Abstract The paper presents an equivalent circuit based simulation model for the static and dynamic behavior of lithium-ion battery systems and explains the different steps of the theoretical and experimental modeling process. The equivalent circuit based model describes the voltage-current characteristic, the state of charge behavior and the occurring losses of the battery system. A parameter identification method based on three characteristic experiments, a cycle test, an open circuit voltage test and pulse tests, is introduced. The model parameters are estimated employing a nonlinear optimization method. Furthermore, the experimental test bed for investigation of lithium-ion battery systems is described. The battery model approach is demonstrated and validated for a commercial 5 kWh lithium-ion battery system, including the model validation for test profiles and emulated battery charging and discharging profiles of a real photovoltaic home storage application. The comparison of measured and simulated voltage profiles indicates an excellent performance of the battery model.

In old age, the complex relation of food consumption with energy and nutrient requirements finds expression in both single and multiple nutritional problems. Addressing conditions affecting intake -- either from foods or from supplements -- endogenous production, bioefficacy and/or requirements can benefit nutritional health in old age through balancing requirements and supply.

Abstract Passivated emitter and rear cells (PERC) are considered to be the next generation of industrial-type screen-printed silicon solar cells. Deposition methods for rear passivation layers have to meet both the high-throughput and low-cost requirements of the PV industry in combination with high-quality surface passivation properties. In this paper, we evaluate and optimise a novel deposition technique for AlO x passivation layers by applying an inductively coupled plasma (ICP) plasma-enhanced chemical vapour deposition (PECVD) process. The ICP AlO x deposition process enables high deposition rates up to 5 nm/s as well as excellent surface recombination velocities below 10 cm/s after firing. A fixed negative charge of −4×10 12 cm −2 is measured for ICP AlO x single layers with an interface state density of 11.0×10 11 eV −1 cm −2 at midgap position. When applied to PERC solar cells the ICP AlO x layer is capped with a PECVD SiN y layer. We achieve independently confirmed conversion efficiencies of up to 20.1% for large-area (15.6×15.6 cm 2 ) PERC solar cells with screen-printed metal contacts and ICP AlO x /SiN y rear side passivation on standard boron-doped Czochralski-grown silicon wafers. The internal quantum efficiency reveals an effective rear surface recombination velocity S rear of (90±30) cm/s and an internal rear reflectance R b of (91±1)% which demonstrates the excellent rear surface passivation of the ICP AlO x /SiN y layer stack.

Carbon capture, utilization, and storage (CCUS) is a gas injection technology that enables the storage of CO2 underground. The aims are twofold, on one hand to reduce the emissions of CO2 into the atmosphere and on the other hand to increase oil/gas/heat recovery. Different types of CCUS technologies and related engineering projects have a long history of research and operation in the USA. However, in China they have a short development period ca. 10 years. Unlike CO2 capture and CO2-EOR technologies that are already operating on a commercial scale in China, research into other CCUS technologies is still in its infancy or at the pilot-scale. This paper first reviews the status and development of the different types of CCUS technologies and related engineering projects worldwide. Then it focuses on their developments in China in the last decade. The main research projects, international cooperation, and pilot-scale engineering projects in China are summarized and compared. Finally, the paper examines the challenges and prospects to be experienced through the industrialization of CCUS engineering projects in China. It can be concluded that the CCUS technologies have still large potential in China. It can only be unlocked by overcoming the technical and social challenges.

The new GHG calculator named SECTOR (Source-selective and Emission-adjusted GHG CalculaTOR for Cropland) is based on the IPCC Tier 2 approach for rice as well as other crops. The new features of SECTOR facilitate high flexibility in terms of entering newly obtained emission factors, easy data transfer from crop statistics for entering activity data and detailed specifications of GHG scenarios. A new procedure of entering frequency-based data on current water management practices was also developed. Moreover, the tool allows deviating from the 2006 IPCC Guidelines by considering field records with high background levels of N₂O emissions in the overall assessment of GHG emissions. This article assesses different applications of the tool, namely as add-ons to field measurements, for GHG calculation at national/sectorial scale and within measurement, reporting and verification of development projects. SECTOR is downloadable in the form of templates that can be used to develop custom versions with varying levels of disaggregated data entries at different scales. A case study for rice production in one Vietnamese province demonstrates the potential to display GHG results in combination with GIS. SECTOR can easily be adjusted to incorporate new emission factors and calculation procedures expected in forthcoming revisions of the IPCC Guidelines.

Comparative wind tunnel experiments were performed on passive flow separation control on a at plate model equipped with a flap. The purpose of these tests was to investigate the flow control capabilities of off-surface mounted elements. A comparison was made of delta-shaped vortex generators of 1 to 1/3 boundary layer height and cylinders close to the wall. Surface pressure as well as PIV measurements were performed to investigate the influence of the layout of the VGs as well as the diameter of the cylinder and the position of the elements. The results showed that the off-surface devices performed better than the on-surface VGs for the fully separated case, and were equally good in improving the state of boundary layer that is on the verge of separation. It was also found that the off-surface devices could be positioned over a wider range with respect to the separation point. The experiments furthermore indicated that for the optimum cylinder configuration the vortex shedding frequency was consistent with the frequencies found in literature on periodic flow excitation.

Optimising the photoelectrochemical performance of hematite photoanodes for solar water splitting requires better understanding of the relationships between dopant distribution, structural defects and photoelectrochemical properties. Here, we use complementary characterisation techniques including electron microscopy, conductive atomic force microscopy (CAFM), Rutherford backscattering spectroscopy (RBS), atom probe tomography (APT) and intensity modulated photocurrent spectroscopy (IMPS) to study this correlation in Ti-doped (1 cat.%) hematite films deposited by pulsed laser deposition (PLD) on F:SnO2 (FTO) coated glass substrates. The deposition was carried out at 300 ��C, followed by annealing at 500 deg C for 2 h. Upon annealing, Ti was observed by APT to segregate to the hematite/FTO interface and into some hematite grains. Since no other pronounced changes in microstructure and chemical composition were observed by electron microscopy and RBS after annealing, the non-uniform Ti redistribution seems to be the reason for a reduced interfacial recombination in the annealed films, as observed by IMPS. This results in a lower onset potential, higher photocurrent and larger fill factor with respect to the as-deposited state. This work provides atomic-scale insights into the microscopic inhomogeneity in Ti-doped hematite thin films and the role of defect segregation in their electrical and photoelectrochemical properties.