• Energy Research
• natural sciences close
• 3. Good health close
• DE close

Redox flow batteries are promising devices for large-scale stationary energy storage.

Tin (Sn), antimony (Sb), as well as their intermetallic compound SnSb are potential high‐capacity negative electrodes for lithium‐ or sodium‐ion batteries. Starting from bulk Sn and Sb, the effect of ball milling in sodium‐ion half cells with a diglyme‐based electrolyte is studied. Nonreactive ball milling of Sn, Sb, and carbon leads to intimately mixed but largely phase‐separated composites (Sn + Sb) with electrochemical sodiation behavior being the sum of the individual phases. Thereby, Sb shows an unusual and rapid capacity fade in the chosen electrolyte which is unexpected, considering the usually excellent compatibility of diglyme‐based electrolytes with negative electrodes. Reactive ball milling of Sn and Sb using a planetary ball mill leads to the phase‐pure intermetallic compound β‐SnSb. Compared with Sn + Sb, SnSb shows excellent performance with a specific capacity exceeding 400 mAh g−1 after 190 cycles and a high rate capability (around 400 mAh g−1 at 5 C). Hence, herein, Sb is largely inactive as a pure phase but active when bound in the β‐SnSb intermetallic compound. Using in situ electrochemical dilatometry, the “breathing” of the electrodes during charging/discharging is minimized by optimizing ball‐milling time, which improves cycle life.

Abstract Offshore cultivation of seaweed provides an innovative feedstock for biobased products supporting blue growth in northern Europe. This paper analyzes two alternative exploitation pathways: energy and protein production. The first pathway is based on anaerobic digestion of seaweed which is converted into biogas, for production of electricity and heat, and digestate, used as fertilizer; the second pathway uses seaweed hydrolysate as a substrate for cultivation of heterotrophic microalgae. As a result the seaweed sugars are consumed while new proteins are produced enhancing the total output. We performed a comparative Life Cycle Assessment of five scenarios identifying the critical features affecting resource efficiency and environmental performance of the systems with the aim of providing decision support for the design of future industrial scale production processes. The results show that all scenarios provide environmental benefits in terms of mitigation of climate change, with biogas production from dried Laminaria digitata being the most favorable scenario, quantified as −18.7*10 2 kg CO 2 eq./ha. This scenario presents also the lowest consumption of total cumulative energy demand, 1.7*10 4 MJ/ha, and even resulting in a net reduction of the fossil energy fraction, −1.9*10 4 MJ/ha compared to a situation without seaweed cultivation. All scenarios provide mitigation of marine eutrophication thanks to bioextraction of nitrogen and phosphorus during seaweed growth. The material consumption for seeded lines has 2–20 times higher impact on human toxicity (cancer) than the reduction achieved by energy and protein substitution. However, minor changes in cultivation design, i.e. use of stones instead of iron as ballast to weight the seeded lines, dramatically reduces human toxicity (cancer). Externalities from the use of digestate as fertilizer affect human toxicity (non-cancer) due to transfer of arsenic from aquatic environment to agricultural soil. However concentration of heavy metals in digestate does not exceed the limit established by Danish regulation. The assessment identifies seaweed productivity as the key parameter to further improve the performance of the production systems which are a promising service provider of environmental restoration and climate change mitigation.

Due to their high theoretical capacity, transition metal oxide compounds are promising electrode materials for lithium‐ion batteries. However, one drawback is associated with relevant capacity fluctuations during cycling, widely observed in the literature. Such strong capacity variation can result in practical problems when positive and negative electrode materials have to be matched in a full cell. Herein, the study of ZnMn2O4 (ZMO) in a nonconventional electrolyte based on 3‐cyanopropionic acid methyl ester (CPAME) solvent and LiPF6 salt is reported for the first time. Although ZMO in LiPF6/CPAME electrolyte displays a dramatic capacity decay during the first cycles, it shows promising cycling ability and a suppressed capacity fluctuation when vinylene carbonate (VC) is used as an additive to the CPAME‐based electrolyte. To understand the nature of the solid electrolyte interphase (SEI), the electrochemical study is correlated to ex situ X‐ray photoelectron spectroscopy (XPS).

Abstract Electrochromic glazing allows the solar energy gain and daylighting in buildings and cars to be controlled. Here we report new results about a special type of electrochromic device. It consists of an electrochromic layer (WO 3 ) on a transparent electrode, an electrolyte containing Li + cations and a redox system (I − /I 3 − ), and a catalyst (Pt) on a second transparent electrode. The electrolyte is based on gelled ionic liquids. The change in the transmittance is extremely high; the visible (solar) transmittance can be switched between 63% (46%) and 1.2% (0.7%). A segmented 30×30 cm 2 sample with conductor paths reduces the transmittance by a factor of 10 in 8 s.

Time-resolved formation of micro-structured mossy/dendritic lithium is investigated during battery cycling byoperandoEPR spectroscopy, using a novel electrochemical cell design.

In this scientific publication, a new sensor approach for status monitoring, such as state of charge and state of health, of lithium ion batteries by using special Bragg gratings inscribed into standard optical glass fibers is presented. In addition to well-known core gratings, embedded into the anode of 5 Ah lithium ion pouch cells as a strain monitoring unit, the manufacturing of a surface cladding waveguide Bragg grating sensor incorporated into the cell’s separator, that is sensitive to changes of the refractive index of the surrounding medium, is demonstrated. On the basis of the experiments carried out, characteristics of the cell behavior during standard cyclization and recognizable marks in subsequent post-mortem analyses of the cell components are shown. No negative influence on the cell performance due to the integrated sensors have been observed; however, the results show a clear correlation between fading cell capacity and changes of the interior optical signals. Additionally, with the novel photonic sensor, variations in the electrolyte characteristics are determinable as the refractive index of the solution changes at different molar compositions. Furthermore, with the manufactured battery cells, abuse tests by overcharging were conducted, and it was thereby demonstrated how internal battery sensors can derive additional information beyond conventional battery management systems to feasibly prevent catastrophic cell failures. The result of the research work is an early stage photonic sensor that combines chemical, mechanical and thermal information from inside the cell for an enhanced battery status analysis.

Induction of PM2.5-associated lung cancer in response to EGFR-tyrosine kinase inhibitors (EGFR-TKI) remains unclear. Polycyclic aromatic hydrocarbons (PAHs) and their polar derivatives (oxygenated PAHs: OPAHs and azaarenes: AZAs) were characterized in fine particulates (PM2.5) emitted from indoor coal combustion. Samples were collected in Xuanwei (Yunnan Province), a region in China with a high rate of lung cancer. Human lung adenocarcinoma cells A549 (with wild-type EGFR) and HCC827 (with EGFR mutation) were exposed to the PM2.5, followed by treatment with EGFR-TKI. Two samples showed significant and dose-dependent reduction in the cell viability in A549. EGFR-TKI further demonstrated significantly decreased in cell viability in A549 after exposure to the coal emissions. Chrysene and triphenylene, dibenzo[a,h]anthracene, benzo[ghi]perylene, azaarenes and oxygenated polycyclic aromatic hydrocarbons (carbonyl-OPAHs) were all associated with EGFR-TKI-dependent reduced cell viability after 72-h exposure to the PM2.5. The findings suggest the coal emissions could influence the response of EGFR-TKI in lung cancer cells in Xuanwei.