• Energy Research
• Open Access close
• Embargo close
• 12. Responsible consumption close
• 6. Clean water close
• 1. No poverty close
• DK close

Microbial electrochemical technologies (METs) constitute the core of a number of emerging technologies with a high potential for treating urban wastewater due to a fascinating reaction mechanism—the electron transfer between bacteria and electrodes to transform metabolism into electrical current. In the current work, we focus on the model electroactive microorganism Geobacter sulfurreducens to explore both the design of new start-up procedures and electrochemical operations. Our chemostat-grown plug and play cells, were able to reduce the start-up period by 20-fold while enhancing chemical oxygen demand (COD) removal by more than 6-fold during this period. Moreover, a filter-press based bioreactor was successfully tested for both acetate-supplemented synthetic wastewater and real urban wastewater. This proof-of-concept pre-pilot treatment included a microbial electrolysis cell (MEC) followed in time by a microbial fuel cell (MFC) to finally generate electrical current of ca. 20 A·m−2 with a power of 10 W·m−2 while removing 42 g COD day−1·m−2. The effective removal of acetate suggests a potential use of this modular technology for treating acetogenic wastewater where Geobacter sulfurreducens outcompetes other organisms.

Evaporation experiments are frequently used to identify the hydraulic properties of soils by inverse simulations with the Richards equation or simplified calculation methods. Evaporation experiments with an extended instrumentation were conducted in a temperature-controlled lab. Evaporation rates were measured gravimetrically, soil water pressure head was measured using mini-tensiometers and relative humidity sensors, and soil temperature was measured using thermocouples. The measurements were evaluated by inverse modeling with the Richards equation and the soil hydraulic properties, i.e. the water retention and hydraulic conductivity curves, were identified. The dataset contains all experimental data and the results of the inverse simulation, i.e. fitted time series of pressure head and the identified soil hydraulic properties of two soils (sand and silt loam).

Dynamics of societal material stocks such as buildings and infrastructures and their spatial patterns drive surging resource use and emissions. Building up and maintaining stocks requires large amounts of resources; currently stock-building materials amount to almost 60% of all materials used by humanity. Buildings, infrastructures and machinery shape social practices of production and consumption, thereby creating path dependencies for future resource use. They constitute the physical basis of the spatial organization of most socio-economic activities, for example as mobility networks, urbanization and settlement patterns and various other infrastructures. This dataset features a detailed map of material stocks for the whole of Germany on a 10m grid based on high resolution Earth Observation data (Sentinel-1 + Sentinel-2), crowd-sourced geodata (OSM) and material intensity factors. Temporal extent The map is representative for ca. 2018. Data format Per federal state, the data come in tiles of 30x30km (see shapefile). The projection is EPSG:3035. The images are compressed GeoTiff files (*.tif). There is a mosaic in GDAL Virtual format (*.vrt), which can readily be opened in most Geographic Information Systems. The dataset features area and mass for different street types area and mass for different rail types area and mass for other infrastructure area, volume and mass for different building types Masses are reported as total values, and per material category. Units area in m² height in m volume in m³ mass in t for infrastructure and buildings Further information For further information, please see the publication or contact Helmut Haberl (helmut.haberl@boku.ac.at). A web-visualization of this dataset is available here. Visit our website to learn more about our project MAT_STOCKS - Understanding the Role of Material Stock Patterns for the Transformation to a Sustainable Society. Publication Haberl, H., Wiedenhofer, D., Schug, F., Frantz, D., Virág, D., Plutzar, C., Gruhler, K., Lederer, J., Schiller, G. , Fishman, T., Lanau, M., Gattringer, A., Kemper, T., Liu, G., Tanikawa, H., van der Linden, S., Hostert, P. (accepted): High-resolution maps of material stocks in buildings and infrastructures in Austria and Germany. Environmental Science & Technology Funding This research was primarly funded by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (MAT_STOCKS, grant agreement No 741950). ML and GL acknowledge funding by the Independent Research Fund Denmark (CityWeight, 6111-00555B), ML thanks the Engineering and Physical Sciences Research Council (EPSRC; project Multi-Scale, Circular Economic Potential of Non-Residential Building Scale, EP/S029273/1), JL acknowledges funding by the Vienna Science and Technology Fund (WWTF), project ESR17-067, TF acknowledges the Israel Science Foundation grant no. 2706/19.

This paper analyses the impact of postponing global mitigation action on abatement costs and energy systems changes in China and India. It compares energy-system changes and mitigation costs from a global and two national energy-system models under two global emission pathways with medium likelihood of meeting the 2 °C target: a least-cost pathway and a pathway that postpones ambitious mitigation action, starting from the Copenhagen Accord pledges. Both pathways have similar 2010–2050 cumulative greenhouse gas emissions. The analysis shows that postponing mitigation action increases the lock-in in less energy efficient technologies and results in much higher cumulative mitigation costs. The models agree that carbon capture and storage (CCS) and nuclear energy are important mitigation technologies, while the shares of biofuels and other renewables vary largely over the models. Differences between India and China with respect to the timing of emission reductions and the choice of mitigation measures relate to differences in projections of rapid economic change, capital stock turnover and technological development. Furthermore, depending on the way it is implemented, climate policy could increase indoor air pollution, but it is likely to provide synergies for energy security. These relations should be taken into account when designing national climate policies.

Sustainability is a managerial trend that plays an important role in the contemporary organizational strategy. A company’s capability to make sustainability more dynamic and integrated with strategies, transforming it into a business asset, has yet to be studied. This process of adaptation is reflected through innovative practices. However, there is still a gap between these practices and the organization’s strategies and capabilities. The aim of this work was to conduct a systematic literature review of the dynamic capabilities for sustainability. Afterward, it was possible to systematize the available knowledge, assessing the current lack of research integrating both themes. The mainstream literature was classified and coded, resulting in a framework for what has been done to date, with recommendations to guide future research. Results show that more research is needed on dynamic capabilities for sustainability, especially in emerging economies in general. Future studies should also consider mixed methodologies and comparative perspectives in multiples sectors or in the services sector. There’s also space to discuss managerial innovations toward sustainability through research alliances between different institutions around the world. In short, there are few studies that connect both themes— corporate sustainability and dynamic capabilities—and for this reason there is an opportunity for future studies seeking to identify what kind of dynamic capabilities can be developed to more effectively overcome the emerging sustainability challenges.

Abstract Industry is one of the highest energy consumption sector: some facilities like steelworks, foundries, or paper mills are highly energy-intensive activities. Many countries have already implemented subsidies on energy efficiency in generation and utilisation, with the aim of decreasing overall consumption and energy intensity of gross domestic product. Meanwhile, researchers have increased interest into alternative energy systems to decrease pollution and use of fossil fuels. Hydrogen, in particular, is proposed as a clean alternative energy vector, as it can be used as energy storage mean or to replace fossil fuels, e.g. for transport. This work analyses the re-vamping of the energy generation system of a paper mill by means of reversible solid oxide cells (RSOCs). The aim is not only to increase efficiency on energy generation, but also to create a polygeneration system where hydrogen is produced. Application on a real industrial facility, based in Italy with a production capacity of 60000 t/y of paper, is analysed. First, the current energy system is studied. Then, a novel system based on RSOC is proposed. Each component of the systems (both existing and novel) is defined using operational data, technical datasheet, or models defined with thermodynamic tools. Then, the interaction between them is studied. Primary energy analysis on the novel system is performed, and saving with respect to the current configuration is evaluated. Even if the complexity of the system increases, results show that saving occurs between 2 and 6%. Hydrogen generation is assessed, comparing the RSOC integrated system with proton exchange membrane (PEM) electrolysis, in terms of both primary energy and economics. Results exhibit significant primary energy and good economic performance on hydrogen production with the novel system proposed (hydrogen cost decreases from 10 €/kg to at least 8 €/kg).

Abstract Thermal stratification in a water storage tank can strongly increase the thermal performance of solar heating systems. Thermal stratification can be built up in a storage tank during charge, if the heated water enters through an inlet stratifier. Experiments with a test tank have been carried out in order to elucidate how well thermal stratification is established in the tank with differently designed inlet stratifiers under different controlled laboratory conditions. The investigated inlet stratifiers are from Solvis GmbH & Co KG and EyeCular Technologies ApS. The inlet stratifier from Solvis GmbH is a rigid plastic pipe with holes for each 30 cm. The holes are designed with flaps preventing counter flow into the pipe. The inlet stratifier from EyeCular Technologies ApS is made of a flexible polymer with openings all along the side and in the full length of the stratifier. The flexibility of the stratifier prevents counterflow. The tests have shown that both types of inlet stratifiers had an ability to create stratification in the test tank under the different test conditions. The stratifier from EyeCular Technologies ApS had a better performance at low flows of 1–2 l/min and the stratifier for Solvis GmbH & Co KG had a better performance at 4 l/min. In the intermediate charge test the stratifier from EyeCular Technologies ApS had a better performance in terms of maintaining the thermal stratification in the storage tank while charging with a relative low temperature.

The global energy demand is growing substantially. Clean and secure energy supply is a must for our civilization's sustainable development. Solar and wind energy is growing fast and can contribute significantly to meet the goals set by many countries to reduce greenhouse gas emissions. A deep and wide investigation of the environmental impact of solar and wind energy is important before any solar or wind plants' construction is made. In this study, the literature is reviewed to summarize the environmental impact of solar and wind energy systems in terms of the following factors; land use, water consumption, impact on biodiversity, visual and noise effects, health issues, and impact on micro climate. Although the benefits of solar and wind energy are obvious and great, negative perception of these technologies can inhibit their wide penetration in some regions. This review paper includes a critical and an inclusive analysis of solar and wind energy’s environmental impact and may serve as an important tool to conduct a proper environmental impact assessment. This critical analysis may serve also as a tool for developers, policy, and decision-when planning future solar and wind farms.