• Energy Research
• Restricted close
• Embargo close
• 15. Life on land close
• 12. Responsible consumption close
• GB close
• AU close
• FI close

Using 40-year experiment data from a mono-modal rainfall area of northern Togo, we analyzed soil fertility dynamics when 2 and 3-year fallows were alternated with 3-year rotation of groundnut, cotton and sorghum. The control treatment consisted to continuous cultivate the soil in a rotation of groundnut/cotton/sorghum without fallow periods. For each rotation, two fertilisation rates were applied: no fertilisation and mineral fertiliser application during the cropping and/or the fallow periods. Yields of unfertilised crops, which averaged 1 t ha-1 during the first years of cultivation, were often nil in the long-term. In the long-term, yields of fertilised cotton and sorghum decreased by 32 and 50 %, respectively compared to the average of 2.4 and 1.6 t ha-1 obtained during the first decade of cultivation. The long-term decline in crop productivity was mitigated when fallow periods were alternated with cropping periods, and consequently there was partial compensation in terms of production for the unproductive fallowed plots. Long-term yields of fertilised cotton and sorghum in the periodically fallowed plots were 40 and 50 % higher than those in continuously cropped plots, respectively; they were 90 and 60 % higher than those in continuously cropped plots without fertilisation. Like for crop productivity, soil C, N and exchangeable Ca and Mg decreased less in periodically fallowed plots than in continuously cropped plots. The limited soil C decline when fallows were alternated with crops appears to be the consequence of no-tillage period rather than the effect of the highest C inputs to the soil.

Wood biomass is turned into industrial fuel through chipping. The efficiency of chipping depends on many factors, including chipper knife wear. Chipper knife wear was determined through a long-term follow-up study, conducted at a waste wood recycling yard. Knife wear determined a sharp drop of productivity (>20%) and a severe decay in product quality. Dry sharpening with a grinder mitigated this effect, but it could not replace proper wet sharpening. Increasing the frequency of wet sharpening sessions determined a moderate increase of knife depreciation cost, but it could drastically enhance machine performance and reduce biomass processing cost. Since benefits largely exceed costs, increasing the frequency of wet sharpening sessions may be an effective measure for reducing overall chipping cost. If the main goal of a chipper operator is to increase productivity and/or decrease fuel consumption, then managing knife wear should be a primary target. (C) 2014 Elsevier Ltd. All rights reserved.

The oleaginous alga Chlorella protothecoides accumulates lipid in its biomass when grown in nitrogen-restricted conditions. To assess the relationship between nitrogen provision and lipid accumulation and to determine the contribution of photosynthesis in mixotrophic growth, C. protothecoides was grown in mixo- and heterotrophic nitrogen-limited continuous flow cultures. Lipid content increased with decreasing C/N, while biomass yield on glucose was not affected. Continuous production of high lipid levels (57% of biomass) was possible at high C/N (87-94). However, the lipid production rate (2.48 g L(-1) d(-1)) was higher at D=0.84 d(-1) with C/N 37 than at D=0.44 d(-1) and C/N 87 even though the lipid content of the biomass was lower (38%). Photosynthesis contributed to biomass and lipid production in mixotrophic conditions, resulting in 13-38% reduction in CO2 production compared with heterotrophic cultures, demonstrating that photo- and heterotrophic growth occurred simultaneously in the same population.

Great efforts have been paid to improve engine efficiency as well as to reduce the pollutant emissions. The direct injection allows to improve the engine efficiency; on the other hand, the GDI combustion produces larger particle emissions. The properties of fuels play an important role both on engine performance and pollutant emissions. In particular, great attention was paid to the octane number. Oxygenated compounds allow increasing gasoline's octane number and play an important role in PM emission reduction. In this study was analyzed the effect of fuels with different RON and with ethanol and ethers content. The analysis was performed on a small GDI engine. Two operating conditions, representative of the typical EUDC cycle, were investigated. Both the engine performance and the exhaust emissions were evaluated. The gaseous emissions and particle concentration were measured at the exhaust by means of conventional instruments. Particle size distribution function was measured in the range from 5.6 nm to 560 nm by means of an Engine Exhaust Particle Sizer (EEPS). The results point out that the better result in terms of performance and emission reduction was observed for the high RON fuel. The fuels with ethanol as additive show a large fuel consumption and a not valuable effect on exhaust emissions

AbstractProjections show that biomass will remain important for reaching future EU renewable energy targets. In addition to using domestic biomass, European bioenergy markets will also partly rely on imports of biomass, in particular in trade‐oriented EU member states like the United Kingdom, the Netherlands, Belgium, and Denmark. There has been a lot of debate on the sustainability of (imported) biomass and how policy should deal with this. In this research, therefore, we defined long‐term strategies for sustainable biomass imports in European bioenergy markets. We used the input of different stakeholders in our approach through focus‐group discussions and a global survey, focusing on the following aspects: key principles of sustainable biomass trade, risks and opportunities of biomass trade, both for import regions (EU countries) and for sourcing regions, and practical barriers for trade. Overall we conclude that policies should be stable and consistent within a long‐term vision. An overall sustainability assurance framework of biomass production and use is key, but should ultimately apply to all end uses of biomass. Furthermore, the mobilization of biomass should be supported, as well as commoditization, considering the large diversity of biomass. Side impacts of biomass use should be monitored. Reducing investors’ risk perception is crucial for future developments in the biobased economy, and a clear policy to phase out fossil fuels, e.g. through a carbon tax, needs to be implemented. The results of this research are of interest for policy makers when deciding on long‐term strategies concerning sustainable bioenergy markets. © 2018 Society of Chemical Industry and John Wiley & Sons, Ltd

Species distribution models (SDMs) provide realistic scenarios to explain the influence of bioclimatic variables on plant pathogen distribution. Diplodia sapinea is most harmful to plantations of both exotic and native pine species in Italy, causing economic consequences expecially to edible seed production. In this study, we developed maximum entropy models for D. sapinea in Italy to reach the following goals: (i) to carry out the pathogen's first geographical distribution analysis in Italy and determine which ecogeographical variables (EGVs) may influence its outbreaks; (ii) to detect the effect of climate change on the potential occurrence of disease outbreaks by 2050 and 2070. We used Maxent ver. 3.4.0 to develop SDMs. We used six global climate models (BCC-CSM1-1, CCSM4, GISS-E2-R, MIROC5, HadGEM2-ES and MPI-ESM-LR) for two representative concentration pathways (4.5 and 8.5) and two time projections (2050 and 2070) to detect future climate projections of D. sapinea. The most important EGVs influencing outbreaks were land cover, altitude, mean temperature of driest and wettest quarter, precipitation of wettest quarter, precipitation seasonality and minimum temperature of coldest month. The distribution of D. sapinea mostly expanded in central and southern Italy and shifted in altitude upwards on average by ca. 93m a.s.l. Moreover the fungus expanded the range where disease outbreaks may be recorded in response to an increase in the mean temperature of wettest and driest quarter by ca. 1.9 C and 5.8 C, respectively in all climate change scenarios. Precipitation of wettest quarter did not differ between current and any of future models. Under different climate change scenarios D. sapinea's disease outbreaks will be likely to affect larger areas of pine forests in the country, probably causing heavy effects on the dynamics and evolution of these stands or perhaps constraining their survival.

Wet-laying is a mature technology that is applied in large scale for the manufacture of nonwovens, including paper products. However, it usually uses large volumes of water and is energy-intensive. Here we used foam-laying to substantially diminish the volume of water consumed in the formation of fiber networks (5-fold reduction) and to reduce the water content of the nonwovens produced before drying, achieving a reduced energy demand. The prospects of foam-laying were evaluated by comparing foam-laid and wet-laid webs of two types of wood fibers: stiff (lignin-containing) or flexible (lignin-free). Also, the effect of foaming agent type (anionic, cationic, nonionic, and amphoteric) was elucidated. Reference webs were produced by conventional wet-laying, with or without surfactants. Foam-laying was effective in producing a more uniform areal mass distribution (better formation) after wet-pressing. This effect was more evident for the webs synthesized with the flexible fibers. Unlike the layered network structures that were obtained by wet-laying, foam-laid webs exhibited a more felted network, with fibers positioned in the out-of-plane direction. As a result, higher air permeability, web porosity, and light scattering coefficients were measured for the foam-laid webs. The enhanced porosity (lower density) was related to the effect of bubbles during foam-laying and the reduction in surface tension of the foamed-fiber dispersion. The resistance to delamination of low-density webs obtained by foam-laying in the out-of-plane direction was preserved. However, the reduction in tensile strength and modulus of foam-laid webs were determined, owing to the reduced density of the formed structures. Notably, the type of foaming agent used played a minor role as far as the resultant properties of the webs, making the process flexible in terms of the selection of environmentally friendly alternatives. Overall, we compared the physico-mechanical properties of fiber networks formed by web- and foam-laying, depending on fiber type and foaming agent, yielding a property space that is useful in the design of lightweight structures (nonwovens, including paper). The prospects of water and energy savings by foam-laying are the major benefits in the sustainable use of fibers for the assembly of porous materials, such as lightweight nonwoven and paper products.

Abstract Nitrous oxide (N2O) is an important long-lived greenhouse gas and precursor of stratospheric ozone-depleting mono-nitrogen oxides. The atmospheric concentration of N2O is persistently increasing; however, large uncertainties are associated with the distinct source strengths. Here we investigate for the first time N2O emission from terrestrial vegetation in response to natural solar ultra violet radiation. We conducted field site measurements to investigate N2O atmosphere exchange from grass vegetation exposed to solar irradiance with and without UV-screening. Further laboratory tests were conducted with a range of species to study the controls and possible loci of UV-induced N2O emission from plants. Plants released N2O in response to natural sunlight at rates of c. 20–50 nmol m−2 h−1, mostly due to the UV component. The emission response to UV-A is of the same magnitude as that to UV-B. Therefore, UV-A is more important than UV-B given the natural UV-spectrum at Earth's surface. Plants also emitted N2O in darkness, although at reduced rates. The emission rate is temperature dependent with a rather high activation energy indicative for an abiotic process. The prevailing zone for the N2O formation appears to be at the very surface of leaves. However, only c. 26% of the UV-induced N2O appears to originate from plant-N. Further, the process is dependent on atmospheric oxygen concentration. Our work demonstrates that ecosystem emission of the important greenhouse gas, N2O, may be up to c. 30% higher than hitherto assumed.