• Energy Research
• 7. Clean energy close
• 1. No poverty close
• CN close
• GB close
• DE close
• Sustainability close

The Intergovernmental Panel on Climate Change (IPCC) report that to limit warming to 1.5 °C, Bioenergy with Carbon Capture and Storage (BECCS) is required. Integrated assessment models (IAMS) predict that a land area between the size of Argentina and Australia is required for bioenergy crops, a 3–7 time increase in the current bioenergy planting area globally. The authors pose the question of whether vertical farming (VF) technology can enable BECCS deployment, either via land sparing or supply. VF involves indoor controlled environment cultivation, and can increase productivity per unit land area by 5–10 times. VF is predominantly being used to grow small, high value leafy greens with rapid growth cycles. Capital expenditure, operational expenditure, and sustainability are challenges in current VF industries, and will affect the ability to utilise this technology for other crops. The authors argue that, whilst challenging, VF could help reach wider climate goals. Application of VF for bioenergy crops could be a game changer in delivering BECCS technologies and may reduce the land footprint required as well as the subsequent associated negative environmental impacts. VF bioenergy could allow us to cultivate the future demand for bioenergy for BECCS on the same, or less, land area than is currently used globally.

A new environmental ban has forced the restructure of open dumps in China since 1 July 2011. A technical process was established in this study that is feasible for the upgrade of open dumps through restructuring. The feasibility of restructuring and the benefit of greenhouse gas emission reductions were assessed according to field surveys of five landfills and four dumps in Nanjing. The results showed that the daily processing capacities of the existing landfills have been unable to meet the growth of municipal solid waste (MSW), making restructuring of the landfills imperative. According to an assessment of the technical process, only four sites in Nanjing were suitable for upgrading. Restructuring the Jiaozishan landfill effectively reduced the leachate generation rate by 5.84% under its scale when expanded by 60.7% in 2015. CO2 emissions were reduced by approximately 55,000–86,000 tons per year, in which biogas power generation replaced fossil fuels Fossil fuels accounted for the largest proportion, up to 45,000–60,000 tons. Photovoltaic power generation on the overlying land has not only reduced CO2 emissions to 26,000–30,000 tons per year but has also brought in continuing income from the sale of electricity. The funds are essential for developing countries such as China, which lack long-term financial support for landfill management after closure.

Climate change, environmental degradation, and limited resources are motivations for sustainable forest management. Forests, the most abundant renewable resource on earth, used to make a wide variety of forest-based products for human consumption. To provide a scientific measure of a product’s sustainability and environmental performance, the life cycle assessment (LCA) method is used. This article provides a comprehensive review of environmental performances of forest-based products including traditional building products, emerging (mass-timber) building products and nanomaterials using attributional LCA. Across the supply chain, the product manufacturing life-cycle stage tends to have the largest environmental impacts. However, forest management activities and logistics tend to have the greatest economic impact. In addition, environmental trade-offs exist when regulating emissions as indicated by the latest traditional wood building product LCAs. Interpretation of these LCA results can guide new product development using biomaterials, future (mass) building systems and policy-making on mitigating climate change. Key challenges include handling of uncertainties in the supply chain and complex interactions of environment, material conversion, resource use for product production and quantifying the emissions released.

China’s research on and specific implementation of energy saving for buildings are mainly concentrated in urban areas, but according to 2016 statistics, the rural population accounts for 42.65% of the total population, so rural housing has considerable energy-saving potential. However, the degree of attention to the energy consumption of rural houses needs to be improved. Regarding the research on and implementation of passive energy-saving strategies for residences, compared with centralized urban high-rise residences, rural residences mainly have independent courtyards, with a flexible layout and easier transformation. In this study, a system that uses the common cold lanes in traditional villages and buildings’ exterior walls was constructed, and the indoor spaces of courtyard buildings in southern Shaanxi were completely passively cooled in summer. This system can be completely separated from the supply of artificial energy by relying on the accumulation and buoyancy effects of air in patios and cold lanes and the hot-pressure ventilation in buildings to cool the buildings and greatly improve indoor ventilation efficiency. As the building is ventilated and cooled, the air wall formed in the system can effectively prevent direct contact between the outdoor and indoor temperatures and reduce the impact of thermal wall radiation on the interior. In previous studies on the passive design of courtyard houses, scholars considered the effect of thermal wall radiation on indoor temperature in simulations. Therefore, in this study, we also separately calculated whether to consider the difference between the situation with and without wall heat radiation (WHR) when simulating thermal conversion. The final results show that when the cooling system was adopted, the annual cooling load of the whole building was 4786.494 kW·h without WHR. However, with WHR, the cooling load reduction was 2989.128 kW·h, a difference of 1797.336 kW·h.

Although the United Nations’ Sustainable Development Goals (SDGs) advocate, through SDG 4 and SDG 10, equitable quality education and the reduction of inequalities within and between countries, respectively, few studies have examined how inequalities in regional sustainability influence higher education. Therefore, this study aims to examine the relationship between regional sustainability and higher education in China using fixed-effects panel modelling. A systematic force framework showing how regional sustainability drives higher education was constructed from economic, social, and environmental perspectives, and the endogeneity in the process of how regional sustainability affects higher education was explored by introducing one-year lagged values as instrumental variables. Our results show that regional sustainability has a significant impact on higher educational attainment in China, with differing effects in the eastern, central, and western regions, respectively. In central China, economic sustainability plays a significant positive role in higher educational attainment; in the western region, economic and social sustainability have stronger positive effects, while environmental sustainability has significantly negative effects. In terms of policy implications, our findings can be used to support regional development policies to promote regional higher education.

The Chinese electric power industry, including its coal industry and other energy industries that are not efficient, contributes to China’s serious energy shortages and environmental contamination. The governing authority considers energy conservation to be one of the most prominent national targets, and has formulated various plans for decarbonizing the power system. Applying the trans-log cost function, this paper examined the trans-log cost function to analyze the potential inter-factor substitution among energy, capital and labor. We also investigated what role human capital played in energy substitution for the electric power sector during the period from 1981 to 2017. Three key results were derived: (1) energy is price-insensitive, (2) there exists large substitution sustainability between both capital and labor with energy, and (3) human capital input not only enhances the extent of energy substitutability with capital and labor but also is a substitute to energy itself. These findings imply that the liberalization of the electric price mechanism is conducive to lessening energy use and augmenting non-energy intensiveness, and that energy conservation technology could become more sustainable by investing more capital in the electricity sector, thereby achieving a capital–energy substitution and a decrease of CO2 emissions. We further suggest that the priority for the Chinese electric power industry should be to attach more importance to increasing human capital input.

Exploring the sensitivity of rural households’ livelihood strategies to livelihood capital is of great significance for improving rural households’ livelihood levels. This paper selects 23 livelihood capital measurement indicators and conducts an in-depth survey of rural households. In addition, the entropy method and a weighted comprehensive model are used to explore the basic characteristics of rural households’ livelihood capital in the upper reaches of the Min River, China, in 2017. Furthermore, econometric models are used to analyze the sensitivity of rural households’ livelihood strategies to livelihood capital. As indicated from the research, the livelihood capital levels of different types of rural households in the study area are not equivalent. The types of rural households with different livelihood strategies can be ordered in terms of quantity as follows: non-agricultural type > non-agricultural dominant type > agricultural dominant type > pure agricultural type. Livelihood strategies have different sensitivities to different livelihood capital measurement indicators. Among these indicators, cash income, the number of relatives and friends available for financial assistance, and the number of civil servants have positive effects on the livelihood strategy selection of non-agricultural dominant rural households and non-agricultural rural households. However, the average age of laborers, area of cultivated land and gardens, number of livestock and poultry, and present value of production tools have negative effects. These evaluation results can provide a scientific decision-making basis for the formulation of poverty alleviation policies by relevant government departments.

Accurate health prognostics of lithium-ion battery packs play a crucial role in timely maintenance and avoiding potential safety accidents in energy storage. To rapidly evaluate the health of newly developed battery packs, a method for predicting the future health of the battery pack using the aging data of the battery cells for their entire lifecycles and with the early cycling data of the battery pack is proposed. Firstly, health indicators (HIs) are extracted from the experimental data, and high correlations between the extracted HIs and the capacity are verified by the Pearson correlation analysis method. To predict the future health of the battery pack based on the HIs, degradation models of HIs are constructed by using an exponential function, long short-term memory network, and their weighted fusion. The future HIs of the battery pack are predicted according to the fusion degradation model. Then, based on the Gaussian process regression algorithm and battery pack data, a data-driven model is constructed to predict the health of the battery pack. Finally, the proposed method is validated with a series-connected battery pack with fifteen 100 Ah lithium iron phosphate battery cells. The mean absolute error and root mean square error of the health prediction of the battery pack are 7.17% and 7.81%, respectively, indicating that the proposed method has satisfactory accuracy.

Due to climate change and current efforts to reduce emissions in the construction sector, this study evaluates and discusses the results of a comparative cradle-to-grave Life Cycle Assessment (LCA), with a main focus on Global Warming Potential for functionally equivalent carbon-reinforced concrete (CRC) and steel-reinforced concrete (SRC) façade panels for the first time. The novelty of this study is the focus on construction waste and, in particular, the worst-case application of non-recycled construction waste. The use of CRC requires a lower concrete thickness than SRC because the carbon fiber reinforcement does not corrode, in contrast to steel reinforcement. Façade panels of the same geometrical dimensions and structural performance were defined as functional units (FU). Assuming an End-of-Life (EoL) scenario of 50% landfill and 50% recycling, the Global Warming Potential (GWP, given in CO2 equivalent (CO2e)) of the CRC façade (411–496 kg CO2e) is shown to perform better than or equal to the SRC façade (492 kg CO2e). Changing the assumption of CRC to a worst-case scenario, going fully to landfill and not being recycled (single life cycle), turns the GWP results in favor of the SRC façade. Assuming a 50-year service life for the SRC façade panel and relativizing the emissions to the years, the more durable CRC façade performs much better. Finally, depending on the system boundary, the assumed EoL and lifetime, CRC can represent a lower-emission alternative to a functionally equivalent component made of SRC. The most important and “novel” result in this study, which also leads to future research opportunities, is that delicate adjustments (especially concerning EoL scenarios and expected service life) can lead to completely different recommendations for decision-makers. Only by combining the knowledge of LCA experts, structural engineers, and builders optimal decisions can be made regarding sustainable materials and building components.

This paper examines the environmental Kuznets curve (EKC) theory, augmenting the role of oil resources and energy consumption in carbon dioxide (CO2) emissions using the annual data of 11 African oil-producing countries from 1980 to 2014. We apply advanced panel cointegration and panel autoregressive distributive lag (ARDL) techniques coupled with Granger non-causality analysis to account for cross-sectional dependence and heterogeneity. The results of the augmented mean group (AMG) reveal that oil resources abundance degrades the environmental quality in Angola while abating CO2 emissions in Algeria, Gabon, Morocco, and Nigeria. Contrarily, energy consumption escalates pollution in the Congo Democratic Republic (COD), Côte d’Ivoire (CIV), Gabon, Morocco, and Tunisia. Our findings support the EKC hypothesis only in Cameroon, CIV, and Nigeria while exhibiting a U-shaped curve in Algeria and Morocco. Causality analysis unveils that oil resources Granger cause energy consumption, suggesting the balance between renewable and non-renewable energy sources. The current study has important policy implications for promoting green technology, economic diversification, service sector, and green investments.