• Energy Research
• other engineering and technologies close
• GB close
• IT close

Abstract This paper presents a non-stoichiometric equilibrium model for the simulation of biomass downdraft gasifiers. The chemical equilibrium is determined by minimizing the Gibbs free energy. Five elements characterize the biomass and 15 chemical species are considered in the syngas. The model calculates the lower heating value of the syngas and the relative abundances of gasification products. An advantage of this model is that it can easily calculate not only the concentrations of the main gasification products, but also the concentrations of minor product, especially the pollutant chemical species containing Nitrogen and Sulfur. To analyse the model behaviour, a sensitivity analysis on process parameters is presented. The model is validated by comparing its results with the results of simulation carried out with a stoichiometric model and with experimental data found in literature. Finally, the model is applied to the study of the gasification of forest waste.

The present work focuses on the sampling procedure and quantification of the PAH yield from the fast pyrolysis of waste softwood. In particular, fast pyrolysis experiments were conducted using a CDS Pyroprobe 5200 at temperatures between 500 °C and 1000 °C, at a heating rate of 600 °C/s for a sample size of 30 mg. High performance liquid chromatography (HPLC) was used for the determination of the PAH compounds present in the liquid sample fraction, while a micro – GC was employed for the analysis of the main gaseous products (CO, CO2, CH4 and H2). An alternative tar sampling protocol was proposed, which employed the use of a cold trap (50 °C) and an isopropanol filled impinger bottle for the collection of the condensable products. The experiments were compared to heated foil reactor based pyrolysis tests within the same temperature range and heating rate, except for a slightly lower sample size (10 mg). The Pyroprobe and adapted sampling system proved to be more efficient regarding PAH capture and quantification compared to the heated foil reactor. Naphthalene, acenaphthylene and phenanthrene were the main PAH compounds detected. The PAH yields increased with pyrolysis temperature, up to values corresponding to roughly 0.2 wt% of the overall yield at 1000 °C. From the results it was derived that PAH evolution is mainly a product of secondary decomposition of primary tar, since the char yield stabilized for higher temperatures and the yields of CO, H2 and CH4 increased. Overall mass balance closure values were around 80 wt% on average. Char and gas yields were determined with high reproducibility, however gravimetric liquid analysis lacked due to the inability to gravimetrically measure the yield condensing in the impinger bottle. Future work is aimed on improving on this particular aspect. Overall, the alternative tar sampling system proposed was successful in the quantification of PAH from biomass fast pyrolysis experiments offering increased flexibility, accuracy and practicality of use.

This paper describes the introduction of 3D blade designs into the core compressors of the Rolls-Royce Trent engine series with particular emphasis on the use of sweep and dihedral in the rotor designs. It follows the development of the basic ideas in a university research project, through multistage low-speed model testing, to their application to the high pressure engine compressor. An essential element of the project was the use of multistage CFD and some of the development of the method to allow the designs to take place is also discussed. Part I of the paper concentrated on the fundamental university-based research and the methods development. Part II describes additional low-speed multistage design and testing and the high-speed engine compressor designs and tests.

Abstract Reaching universal access to electricity by 2030 requires a massive deployment of mini-grids in rural areas of developing countries. Among the many challenges hindering this process, there are the high uncertainties in assessing demand patterns in rural communities, the costs of field survey campaigns, and the absence of ample and reliable datasets coming from existing projects. This paper tries to address these issues by presenting and discussing a database of load profiles from sixty-one off-grid mini-grids from developing countries worldwide, gathered from the literature, private developers and fieldworks, and reported with technical, socio-economic and geographical characterization factors. A clustering procedure led to the identification of five archetypal load profile clusters, which are presented and analyzed together with their load duration curves. Subsequently, the distribution among the clusters of the various characterization factors selected is studied. The proposed approach allows to widen the range of load profiles usually considered, and to seek correlations between the load profile shapes, the peak power and average energy consumption per connection, the number of customers, the age of measurement, geographical position, operator model, type of tariff and generation technologies present. This work establishes a first step in the creation of a shared database for load profiles of rural mini-grids, helping to overcome the lack of available data and difficulties of demand assessment, proposing original insights for researchers to understand load patterns, and contributing to reduce risks and uncertainties for mini-grid developers.

The decarbonization of transport and heating will introduce uncertain smart appliance growth in the power system, which fundamentally challenges traditional network pricing. In this paper, a new long-term distribution network charging is proposed to accommodate uncertain load growth. Instead of using fixed a load growth rate (LGR), it adopts a fuzzy model, developed based on a set of projected deterministic LGRs and confidence levels. This fuzzy model is incorporated into the pricing model through $ {\alpha } $ -cut intervals. In order to improve computational efficiency, an analytical pricing approach is introduced. The vertex extension approach is used to build charge membership functions. Thereafter, a common defuzzification approach, center of gravity, is employed to defuzzify membership functions in order to generate deterministic charges. The new approach is benchmarked with two existing standard charging methods on a practical U.K. high-voltage distribution system. Results show that it is effective in capturing the uncertainty in load growth.

Owners of power systems incur high costs and investments to transfer the electrical power to customers in the distribution network. Hence, the reliability of the distribution network is particularly important in the lives of customers. Natural disasters such as hurricane and earthquake or sudden faults may threaten the reliability of the distribution network. Therefore, the focus of this study is to provide a new formulation for the distribution system resilience and voltage security. To improve the mentioned objectives in the automated distribution system, the concept of distribution feeder reconfiguration (DFR) is used in this study. Due attention of distribution network resilience and voltage security issues, energy not supplied and voltage stability index along with power loss are considered as objective functions. According to the increase of distributed generators in the distribution network, the effect of these units is considered in the DFR problem. An improved particle swarm optimization is presented to solve the complex and non-convex DFR problem. The proposed algorithm is tested into two distribution systems including IEEE 33 and 70-node.

As part of the Copenhagen Accord, individual countries have submitted greenhouse gas reduction proposals for the year 2020. This paper analyses the implications for emission reductions, the carbon price, and abatement costs of these submissions. The submissions of the Annex I (industrialised) countries are estimated to lead to a total reduction target of 12-18% below 1990 levels. The submissions of the seven major emerging economies are estimated to lead to an 11-14% reduction below baseline emissions, depending on international (financial) support. Global abatement costs in 2020 are estimated at about USD 60-100 billion, assuming that at least two-thirds of Annex I emission reduction targets need to be achieved domestically. The largest share of these costs are incurred by Annex I countries, although the costs as share of GDP are similar for Annex I as a group and the seven emerging economies as a group, even when assuming substantial international transfers from Annex I countries to the emerging economies to finance their abatement costs. If the restriction of achieving two-thirds of the emission reduction target domestically is abandoned, it would more than double the international carbon price and at the same time reduce global abatement costs by almost 25%.

A review of technologies surrounding the thermal management system of the modern diesel engine with increased attention on fuel consumption is presented. A system-based approach has been adopted, looking at the interaction with other key systems. Previous innovation has aimed at reducing the power consumption of the cooling system or incorporating different cooling strategies and improving the engine warm-up rate for improved fuel consumption by higher operating temperatures. Electrical pumps can operate independently of the engine speed, and precision cooling and nucleate boiling have improved the heat transfer within the engine, reducing coolant flow requirements by 90 per cent. Improved warm-up rates have been demonstrated by using reduced thermal inertia or energy recovery systems either simulated on the test rig or through heat exchangers with exhaust gases. The resultant reduction in the fuel consumption is a result of various effects of the temperature on both the lubricating system and the combustion process. Despite difficulties in accurately measuring the engine friction, studies suggest that an increase in the engine temperature from 50°C to 80°C reduces the engine friction by 44 per cent because of 67 per cent lower oil viscosity. Simultaneous reduction in the emissions of nitogen oxides (NO x) and the fuel consumption of 13.5 per cent and 0.7 per cent respectively have been achieved by including the engine thermal system in the calibration procedure. However, in-cylinder data needs to be studied to understand fully the mechanisms involved. Hotter engine temperatures reduce ignition delay, making combustion occur earlier in the cycle, which has a positive effect on the fuel consumption but a negative effect on the NO x emissions. Engine thermal management requires a system-based approach if the effects are to be fully understood but offers potential as an additional parameter in engine calibration.