• Energy Research
• 7. Clean energy close
• 3. Good health close
• 1. No poverty close
• GB close
• Imperial College London close

This study assessed the hand hygiene performance in French nursing homes using the consumption of alcohol-based hand rubs (AHRs) as a surrogate. Nursing homes from the 17 French regions were contacted to collect their AHR consumption and occupancy in 2018 and 2019. A total of 1290 nursing homes from 15 French regions participated in the survey. The estimated median number of hand hygiene actions per resident-day was 1.48 (interquartile range: 1.04-2.03) in 2018 and 1.60 (1.10-2.26) in 2019. A significantly higher AHR consumption was observed in public nursing homes with an infection control team or link nurse.

The Intergovernmental Panel on Climate Change (IPCC) report that to limit warming to 1.5 °C, Bioenergy with Carbon Capture and Storage (BECCS) is required. Integrated assessment models (IAMS) predict that a land area between the size of Argentina and Australia is required for bioenergy crops, a 3–7 time increase in the current bioenergy planting area globally. The authors pose the question of whether vertical farming (VF) technology can enable BECCS deployment, either via land sparing or supply. VF involves indoor controlled environment cultivation, and can increase productivity per unit land area by 5–10 times. VF is predominantly being used to grow small, high value leafy greens with rapid growth cycles. Capital expenditure, operational expenditure, and sustainability are challenges in current VF industries, and will affect the ability to utilise this technology for other crops. The authors argue that, whilst challenging, VF could help reach wider climate goals. Application of VF for bioenergy crops could be a game changer in delivering BECCS technologies and may reduce the land footprint required as well as the subsequent associated negative environmental impacts. VF bioenergy could allow us to cultivate the future demand for bioenergy for BECCS on the same, or less, land area than is currently used globally.

AbstractThis work reports the synthesis, characterization, photophysical, and photovoltaic properties of five new thieno[3,2‐b][1]benzothiophene isoindigo (TBTI)‐containing low bandgap donor–acceptor conjugated polymers with a series of comonomers and different side chains. When TBTI is combined with different electron‐rich moieties, even small structural variations can have significant impact on thin film morphology of the polymer:phenyl C70 butyric acid methyl ester (PCBM) blends. More importantly, high‐resolution electron energy loss spectroscopy is used to investigate the phase‐separated bulk heterojunction domains, which can be accurately and precisely resolved, enabling an enhanced correlation between polymer chemical structure, photovoltaic device performance, and morphology.

Batteries are the most abundant form of electrochemical energy storage. Lithium and sodium ion batteries account for a significant portion of the battery market, but high-performance electrochemically active materials still need to be discovered and optimized for these technologies. Recently, tin(II) oxide (SnO) has emerged as a highly-promising battery electrode. In this work, we present a facile synthesis method to produce SnO nanoparticles whose size and shape can be tailored by changing the solvent nature. We study the complex relationship between wet chemistry synthesis conditions and resulting nanoparticle morphology. Furthermore, high-level electronic structure theory, including dispersion corrections to account for van der Waals forces, are employed to augment our understanding of the underlying chemical mechanisms. The electronic vacuum alignment and surface energies are determined, allowing the prediction of the thermodynamically-favoured crystal shape (Wulff construction) and surface-weighted work function. Finally, the synthesized nanomaterials were tested as Li-ion battery anodes, demonstrating significantly enhanced electrochemical performance for morphologies obtained from specific synthesis conditions. Open-access publication in npj 2D Mater & Appl here.

This article presents numerical prediction of a thermoacoustic limit cycle in an industrial gas turbine combustor. The case corresponds to an experimental high pressure test rig equipped with the full-scale Siemens SGT-100 combustor operated at two mean pressure levels of 3 bar and 6 bar. The Flame Transfer Function (FTF) characterising the global unsteady response of the flame to velocity perturbations is obtained for both operating pressures by means of incompressible Large Eddy Simulations (LES). A linear stability analysis is then performed by coupling the FTFs with a wave-based low order thermoacoustic network solver. All the thermoacoustic modes predicted at 3 bar pressure are stable; whereas one of the modes at 6 bar is found to be unstable at a frequency of 231 Hz, which agrees with the experiments. A weakly nonlinear stability analysis is carried out by combining the Flame Describing Function (FDF) predicted by LES with the low order thermoacoustic network solver. The frequency, mode shape and velocity amplitude corresponding to the predicted limit cycle at 209 Hz are used to compute the absolute pressure fluctuation amplitude in the combustor. The numerically reconstructed amplitude is found to be reasonably close to the measured dynamics.

Optimisation results for the lowest lifetime cost system consisting of solar photovoltaic (PV), hybrid photovoltaic-thermal (PV-T) and solar-thermal collectors alongside battery and hot-water storage systems for meeting the electrical and thermal (hot-water) needs of three multi-effect distillation (MED) plants. The updated results are from optimisations runs carried out in response to peer-review comments.

This dataset underpins the study "Synergies and conflicts of energy development and water security in Africa". The study provides insights into energy supply and demand, power generation, investments and total system costs, water consumption and withdrawal as well as carbon dioxide emissions for the African continent. We developed a model to evaluate energy supply and water requirements to cover the energy needs of the African continent during the period 2015-2065. The model was developed using the open-source modeling system for long-term energy planning OSeMOSYS. The objective function is to minimise total energy system costs, rather than, for example, co-optimise the energy and water sectors. Other energy resources were also included in the model except for adding the water analysis, and the dataset was updated based on the latest available information. The OSeMOSYS model developed to conduct the study “Energy projections for African countries”, itself extended from the Electricity Model Base for Africa (TEMBA), was further extended, included exports for all fuels, water loss due to evaporation in hydropower plants and more scenarios examined. Furthermore, the latest available data on the energy system of Africa was also updated. The TEMBA model produces aggregate energy, and detailed power system results in each country in the African continent. The power sector results are also reported with power pool aggregation. The OSeMOSYS model and input data used to produce these results can be found at KTH-dESA/jrc_temba: TEMBA 2.1 (Version v2.1) [Data set]. Zenodo. http://doi.org/10.5281/zenodo.4889373 (Authors: Ioannis Pappis, Vignesh Sridharan, Will Usher, & Mark Howells. (2021). The initial study was funded by the Joint Research Centre of the European Commission (contract number C936531 - JRC/PTT/2018/C.7/0038/NC).

Nowadays in India the renewable energy sources are continuum growing to accommodate the current demands of energy. Therefore, for an effective use of this energy, a careful and critical analysis is required. As per literature review, India was reported having a massive potential as superpower source in terms of wind energy In the present research, an effort has been carried out to explore various decision making approaches such as TOPSIS, VIKOR, and Fuzzy analysis, to subsequently rank various Indian states with respect to their wind energy potential. In this perspective, potentiality indices have been found on the justification of five significant factors that influence the effective use of wind energy and then a classification has been proposed. It was found that the wind power density is the most significant parameter while the technical expertise has been found as the least significant among identified parameters. The results presented here indicates that among all alternative states of India, Tamilnadu and Maharashtra have the maximum potential to tap the wind energy potential. This study will act as a guide for various government agencies to re-evaluate and re-formulate their energy policies as well as will help various investors (under the ‘Make in India’ campaign) orientated to do business here, to take a well informed decision. The present study also provides a way to make strong policies, in the area of high wind energy potential, in order to maximize the use of renewable source of energy which allows to tackle the societal need and poverty.